The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The role of seawater in interaction of slag and silica fume with cement in low water-to-binder ratio pastes at the early age of hydration
Abstract
Abstract Very low water-to-binder ratio of ultra-high performance concrete (UHPC) may facilitate using seawater as the mixing water, as there may not be sufficient moisture and air in its dense matrix to initiate the corrosion of steel reinforcements. However, extensive research is needed to investigate the effects of intermixed chloride from seawater on fresh and hardened properties UHPC. This study investigated the role of seawater in the interaction of slag and silica fume with cement in very low water-to-binder paste of UHPC at early ages of hydration. The results showed that seawater increased the reactivity of slag and enhanced its interaction with cement due to triggered reactions between seawater components and rich Al-phases in cement and slag. On the contrary, seawater decreased the interaction of silica fume with cement. The overall influence of seawater in the low water-to-binder paste enhanced the hydration kinetics of binary and ternary binders and restrained the autogenous shrinkage. Furthermore, the early age compressive strength was increased. The findings of the study showed that using seawater was in favor of early age properties of paste with very low water-to-binder ratio.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The effect of supplementary cementitious materials on chloride binding in hardened cement paste
Thomas, M. D. A., Hooton, R. D., Scott, A., & Zibara, H. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.01.001 · Cited by 636
Cited by
Fresh and hardened properties of seawater-mixed concrete
Younis, A., Ebead, U., Suraneni, P., & Nanni, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.126 · Cited by 358
A review on seawater sea-sand concrete: Mixture proportion, hydration, microstructure and properties
Zhao, Y., Hu, X., Shi, C., Zhang, Z., & Zhu, D. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123602 · Cited by 299
Self-citationLi, P., Li, W., Yu, T., Qu, F., & Tam, V. W. Y. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118776 · Cited by 276
Shi, D., Yao, Y., Ye, J., & Zhang, W. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.288 · Cited by 65
Metadata
- Authors
- Li, H., Farzadnia, N., & Shi, C.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 185
- Pages
- 508-518
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2883154389
- Cited by
- 175
- References
- 1
- FWCI
- 7.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.