The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber
Abstract
The mechanical properties of high performance concrete (HPC) reinforced with basalt fiber and polypropylene fibers were investigated in this study. The influence of single basalt fibers (BFs), single polypropylene fibers (PF) and hybrid fibers with different contents on the compressive strength, flexural strength, splitting tensile strength and stress-strain curve of HPC were investigated. A formula for calculating the flexural strength of hybrid fiber HPC was developed, and a conversion relationship between flexural strength and cube compressive strength was proposed. On the basis of experimental data analysis, the mathematical expression of the compressive stress-strain of hybrid fiber reinforced HPC was derived. Test results indicate that, the strength of HPC reinforced with single doped basalt fibers or polypropylene fibers increases with the increase of the fiber volume fraction. However, the compressive strength increases slightly, while the flexural strength and splitting tensile strength are improved significantly. When the two types of fibers are mixed into HPC simultaneously, there are two kinds of synergy effects (positive and negative synergy effects). When the basalt fiber content is 0.15% and polypropylene fiber content is 0.033%, the synergy effect of fiber mixing is the best. At this time, the compressive strength, flexural strength and splitting tensile strength increased by 14.1%, 22.8% and 48.6%, respectively, when compared with those of HPC without fibers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tensile behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete
Park, S. H., Kim, D. J., Ryu, G. S., & Koh, K. T. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.09.009 · Cited by 751
Jiang, C., Fan, K., Wu, F., & Chen, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.01.056 · Cited by 731
High-performance fiber-reinforced concrete: a review
Afroughsabet, V., Biolzi, L., & Ozbakkaloglu, T. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9917-4 · Cited by 648
Habel, K., Viviani, M., Denarié, E., & Brühwiler, E. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.009 · Cited by 647
Kizilkanat, A. B., Kabay, N., Akyüncü, V., Chowdhury, S., & Akça, A. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.006 · Cited by 538
Development of hybrid polypropylene-steel fibre-reinforced concrete
Qian, C. X., & Stroeven, P. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00202-1 · Cited by 457
Mechanical behaviour of basalt fibre reinforced concrete
Branston, J., Das, S., Kenno, S. Y., & Taylor, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.009 · Cited by 444
Yazıcı, H., Yardımcı, M. Y., Aydın, S., & Karabulut, A. Ş. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.003 · Cited by 439
Fiber synergy in Hybrid Fiber Reinforced Concrete (HyFRC) in flexure and direct shear
Banthia, N., Majdzadeh, F., Wu, J., & Bindiganavile, V. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.10.018 · Cited by 386
Review of mechanical properties of short fibre reinforced geopolymer composites
Shaikh, F. U. A. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.026 · Cited by 313
Ahmed, S. F. U., & Maalej, M. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.01.009 · Cited by 221
Application of chopped basalt fibers in reinforced mortar: A review
Ralegaonkar, R., Gavali, H., Aswath, P., & Abolmaali, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.245 · Cited by 206
Aslani, F., & Nejadi, S. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.04.044 · Cited by 175
Yew, M. K., Mahmud, H. B., Ang, B. C., & Yew, M. C. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.04.024 · Cited by 136
Fibre reinforced concrete with a combination of polyolefin and steel-hooked fibres
Alberti, M. G., Enfedaque, A., & Gálvez, J. C. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.03.033 · Cited by 124
Li, H., & Liu, G. (2016) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-016-0125-z · Cited by 96
Cement-based composites with mixtures of different types of fibres
Walton, P. L., & Majumdar, A. J. (1975) · Composites · doi:10.1016/0010-4361(75)90416-4 · Cited by 95
Cited by
Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review
Ahmad, J., & Zhou, Z. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127353 · Cited by 266
A review of the mechanical properties and durability of basalt fiber-reinforced concrete
Zheng, Y., Zhang, Y., Zhuo, J., Zhang, Y., & Wan, C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129360 · Cited by 180
Fresh, mechanical, and durability properties of basalt fiber-reinforced concrete (BFRC): A review
Al-Rousan, E. T., Khalid, H. R., & Rahman, M. K. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100155 · Cited by 148
Yan, X., Wang, F., Luo, Y., Liu, X., Yang, Z., & Mao, H. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133935 · Cited by 47
Liu, Q., Cai, L., & Guo, R. (2022) · Structures · doi:10.1016/j.istruc.2022.09.090 · Cited by 15
Metadata
- Authors
- Wang, D., Ju, Y., Shen, H., & Xu, L.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 197
- Pages
- 464-473
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2903213337
- Cited by
- 489
- References
- 17
- FWCI
- 32.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.