The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Study on the optimum initial curing condition for fly ash and GGBS based geopolymer recycled aggregate concrete
Abstract
Abstract Using fly ash, ground granulated blastfurnace slag (GGBS) and recycled aggregates made from construction and demolition (C&D) wastes to produce concrete is a promising technology. However, due to existence of the defects in the recycled aggregates, the prepared concrete usually exhibits poor physical properties. In order to modify these defects, fly ash- GGBS based geopolymer was used to replace the ordinary Portland cement in the prepared geopolymer recycled aggregate concrete (GRAC). GRAC requires a different initial curing condition because that the ingredients and reactions in GRAC are different from ordinary concrete. The aim of this work is to determine the optimum initial curing conditions for fly ash-GGBS based GRAC. The influences of the different initial curing temperature (20, 40, 60, 80 and 100 °C) and curing time (6, 12 and 24 h) on the compressive strength, elastic modulus, toughness and Poisson’s ratio of GRACs were investigated, and the reaction products and microstructure in GRAC under different curing conditions were studied through XRD and SEM tests. The results show that the initial curing under 80 °C for 12–24 h is the optimum curing condition, under which the GRAC had the highest compressive strength, elastic modulus and toughness, evidenced by more ettringite formed and a denser microstructure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Cited by
Liu, J., Hu, L., Tang, L., & Ren, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123451 · Cited by 311
Fan, C., Wang, B., Ai, H., Qi, Y., & Liu, Z. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128790 · Cited by 294
Singh, R. P., Vanapalli, K. R., Cheela, V. R. S., Peddireddy, S. R., Sharma, H. B., & Mohanty, B. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131168 · Cited by 227
Yuan, Z., Jia, Y., Xie, X., & Xu, J. (2025) · Materials · doi:10.3390/ma18030547 · Cited by 22
Metadata
- Authors
- Wang, J., Xie, J., Wang, C., Zhao, J., Liu, F., & Fang, C.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 247
- Pages
- 118540
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3009716841
- Cited by
- 191
- References
- 2
- FWCI
- 12.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.