The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete
Abstract
Abstract Steel fiber-reinforced concrete (SFRC) has a performance superior to that of normal concrete because of the addition of discontinuous fibers. The development of strengths prediction technique of SFRC is, however, still in its infancy compared to that of normal concrete because of its complexity and limited available data. To overcome this limitation, research was conducted to develop an optimum machine learning algorithm for predicting the compressive and flexural strengths of SFRC. The resulting feature impact was also analyzed to confirm the reliability of the models. To achieve this, compressive and flexural strengths data from SFRC were collected through extensive literature reviews, and a database was created. Eleven machine learning algorithms were then established based on the dataset. K-fold validation was conducted to prevent overfitting, and the algorithms were regulated. The boosting- and tree-based models had the optimal performance, whereas the K-nearest neighbor, linear, ridge, lasso regressor, support vector regressor, and multilayer perceptron models had the worst performance. The water-to-cement ratio and silica fume content were the most influential factors in the prediction of compressive strength of SFRC, whereas the silica fume and fiber volume fraction most strongly influenced the flexural strength. Finally, it was found that, in general, the compressive strength prediction performance was better than the flexural strength prediction performance, regardless of the machine learning algorithm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Study of Cross-Validation and Bootstrap for Accuracy Estimation and Model Selection
Kohavi, R. (1995) · Zenodo · doi:10.5281/zenodo.19712698 · Cited by 10,909
Support Vector Method for Function Approximation, Regression Estimation, and Signal Processing
Vapnik, V. N., Golowich, S. E., & Smola, A. J. (1997) · Cited by 2,757
Mechanical properties of high-strength steel fiber-reinforced concrete
Song, P. S., & Hwang, S. (2004) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2004.04.027 · Cited by 1,004
Afroughsabet, V., & Ozbakkaloglu, T. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.06.051 · Cited by 881
Machine learning-based compressive strength prediction for concrete: An adaptive boosting approach
Feng, D.-C., Liu, Z.-T., Wang, X.-D., Chen, Y., Chang, J.-Q., Wei, D.-F., & Jiang, Z.-M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117000 · Cited by 856
Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC
Yazıcı, Ş., İnan, G., & Tabak, V. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.05.025 · Cited by 599
Topçu, İ. B., & Sarıdemir, M. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2007.04.009 · Cited by 531
Abbass, W., Khan, M. I., & Mourad, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.164 · Cited by 484
Machine learning in concrete strength simulations: Multi-nation data analytics
Chou, J.-S., Tsai, C.-F., Pham, A.-D., & Lu, Y.-H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.054 · Cited by 472
Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres
Sivakumar, A., & Santhanam, M. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.03.006 · Cited by 424
Cited by
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Ekanayake, I. U., Meddage, D. P. P., & Rathnayake, U. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01059 · Cited by 498
Ho, L. S., & Tran, V. Q. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133587 · Cited by 77
Liu, J.-C., Huang, L., Tian, Z., & Ye, H. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123946 · Cited by 34
Metadata
- Authors
- Kang, M.-C., Yoo, D.-Y., & Gupta, R.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 266
- Pages
- 121117
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3092657053
- Cited by
- 411
- References
- 34
- FWCI
- 24.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.121117
- The paper
- Kang, M.-C., Yoo, D.-Y., & Gupta, R. (2021). Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.121117
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.