The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Slag uses in making an ecofriendly and sustainable concrete: A review
Abstract
A single ton of ordinary Portland cement (OPC) demands around 4.0 G Joule energy and creates about a ton of CO2 emission. As part of our effort to preserve the environment, the incorporation of ground granulated blast-furnace slag (GGBFS) or fully replaced by alkali-activated slag (AAS) as an alternative binder to OPC. This concrete is environmental-friendly and also eases concerns in energy usage, raw material, and manufacturing cost for the traditional concrete. The cementitious properties of GGBFS and AAS promote their usage in the concrete matrix. Partial inclusion of slag for cement produces OPC or fully replaced by AAS is getting more attention as it is more pumpable, chemically stable, and resistant to an aggressive environment. This paper reviews the source, clean production and chemical compositions of the GGBFS and AAS. This literature review also objects to provide reviews on the properties, hardening conditions, and behaviors of GGBFS and AAS -based concrete composites as well as to synopsize the research development trends to generate comprehensive insights into the potential applications of GGBFS and AAS concrete as raw building materials for making sustainable and greener concrete composites, towards industrializing ecofriendly buildings today.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
The effect of supplementary cementitious materials on chloride binding in hardened cement paste
Thomas, M. D. A., Hooton, R. D., Scott, A., & Zibara, H. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.01.001 · Cited by 636
Hydration properties of basic oxygen furnace steel slag
Wang, Q., & Yan, P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.028 · Cited by 410
Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars
Shi, Z., Shi, C., Wan, S., Li, N., & Zhang, Z. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.07.005 · Cited by 291
Freeze–thaw cycle test and damage mechanics models of alkali-activated slag concrete
Fu, Y., Cai, L., & Yonggen, W. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.12.006 · Cited by 279
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Self-citationReusing biochar as a filler or cement replacement material in cementitious composites: A review
Danish, A., Ali Mosaberpanah, M., Usama Salim, M., Ahmad, N., Ahmad, F., & Ahmad, A. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124295 · Cited by 167
Metadata
- Authors
- Amran, M., Murali, G., Khalid, N. H. A., Fediuk, R., Ozbakkaloglu, T., Lee, Y. H., Haruna, S., & Lee, Y. Y.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 272
- Pages
- 121942
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3115921642
- Cited by
- 241
- References
- 5
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.