The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effects of SAP characteristics on internal curing of UHPC matrix
Abstract
Abstract Superabsorbent polymer (SAP) is an effective internal curing agent, and its efficiency is highly dependent on its physical and chemical characteristics. This study investigates the effect of molecular structure, size, content and pre-treatment of SAP on its performance as an internal curing agent in ultra-high performance concrete (UHPC) through the measurement of internal relative humidity, heat of hydration evolution, autogenous shrinkage, and compressive strength. Two types of SAP (ionic and non-ionic) at three contents of 0.2%, 0.4%, and 0.6% were used at the dry state. The ionic SAP was used in two sizes of 471.3 and 95.1 μm to study the effect of SAP size on the efficiency of internal curing. On the other hand, selected ionic SAPs were prewetted by additional water before mixing (0.4% by mass). Results showed that non-ionic small particle size SAP exhibited a higher restraining effect on autogenous shrinkage. The incorporation of SAP can significantly increase the cumulative heat after 15 h, and thus increase the degree of hydration of cementitious materials in UHPC. However, the investigated SAP characteristics showed no significant effect on the cumulative heat of hydration within the tested period of 72 h. The addition of pre-wetted SAP increased the autogenous shrinkage and delayed the hydration, compared to the dry SAP particles with additional water. Finally, the autogenous shrinkage of UHPC was fitted with several published prediction models, and an optimized model was proposed to predict autogenous shrinkage with respect to internal relative humidity and heat of hydration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Self-citation
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Self-citation
Metadata
- Authors
- Liu, J., Farzadnia, N., Khayat, K. H., & Shi, C.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 280
- Pages
- 122530
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3133294644
- Cited by
- 162
- References
- 1
- FWCI
- 12.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of SAP characteristics on internal curing of UHPC matrix. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2021.122530
- The paper
- Liu, J., Farzadnia, N., Khayat, K. H., & Shi, C. (2021). Effects of SAP characteristics on internal curing of UHPC matrix. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2021.122530
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.