The DOI matches its Crossref record.
The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties
Abstract
This work aims to highlight the effect of seven different types of nano rice husk ash (NRHA) on the mechanical, ultrasonic pulse velocity, and durability of ultra-high-performance concrete (UHPC), whereby two different scenarios were applied. Rice husk ash (RHA) was manufactured by calcining rice husk at temperatures of 300, 500, 700 and 900 °C at a constant time of burning (for 3 h). Then, it was kept for cooling with a constant rate of 100/min and different burning hours of (9, 7, 5, and 3 h, respectively). After that, the product was milled to nano size. The final nano-sized product was added by different dosages (1–5%) with a 2% step to the UHPC mixture. Compressive, splitting tensile, and flexural strength were measured accordingly. Permeability was assessed by the sorptivity test; the ultrasonic pulse velocity test was also conducted. The results showed that the addition of NRHA enhanced the compressive strength and impermeability of UHPC due to the refined pore structure. For a constant burning duration, a significant improvement in compressive strength was observed at a burning temperature of 900 °C and 700 °C for 1% NRHA and at 500 °C and 300 °C for 3% and 5% NRHA. However, for a different burning duration, a significant improvement in compressive strength was recorded at a burning temperature of 700 °C and 500 °C for 3% NRHA, which was burnt for 5 h and 300 °C for 5% NRHA, which was burnt for 9 h. Sorptivity and ultra-sonic pulse velocity confirmed the results. Therefore, the advisable condition is burning at 700 °C for 5 h for more amorphous silica with medium energy compared to other mixes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Self-citationNanomaterials in ultra-high-performance concrete (UHPC) – A review
Yoo, D.-Y., Oh, T., & Banthia, N. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104730 · Cited by 260
Amin, M., Zeyad, A. M., Tayeh, B. A., & Saad Agwa, I. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.126233 · Cited by 253
Self-citationAltharan, Y. M., Shamsudin, S., Al-Alimi, S., Saif, Y., & Zhou, W. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e34433 · Cited by 42
Tayeh, B., Hadzima-Nyarko, M., Riad, M. Y. R., & Hafez, R. D. A. (2023) · Buildings · doi:10.3390/buildings13010129 · Cited by 40
Self-citation
Metadata
- Authors
- Faried, A. S., Mostafa, S. A., Tayeh, B. A., & Tawfik, T. A.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 290
- Pages
- 123279
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3155234846
- Cited by
- 205
- References
- 0
- FWCI
- 19.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2021.123279
- The paper
- Faried, A. S., Mostafa, S. A., Tayeh, B. A., & Tawfik, T. A. (2021). The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2021.123279
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.