The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
Open accessAbstract
Abstract Selective Laser Melting (SLM) and various subsequent stress-relieving treatments were used to obtain 316 L specimens with compressive residual stresses, varying from 15 to 250 MPa. This enabled a study on the effect of residual stress on corrosion of 316 L using electrochemical methods, which is relevant for durability of additively manufactured materials. Overall, compressive stresses in SLM 316 L result in a measurable increase in the pitting potential, accompanied by a decrease in the passive film currents and donor densities. It is proposed that compressive stresses lower the film growth and repassivation kinetics but slightly enhances the pitting resistance of SLM 316 L.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cited by
Voisin, T., Forien, J.-B., Perron, A., Aubry, S., Bertin, N., Samanta, A., Baker, A., & Wang, Y. M. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.11.018 · Cited by 623
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
“There is still no agreement on the mechanism behind the drastic decline in pitting corrosion resistance after subjecting to temperatures above 1000 C, although some authors believe that formation of detrimental MnS inclusions is responsible for this phenomenon [64] while others propose that release of compressive resi…”
BackgroundHeat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Self-citationDefects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Metadata
- Authors
- Cruz, V., Chao, Q., Birbilis, N., Fabijanic, D., Hodgson, P. D., & Thomas, S.
- Venue
- Corrosion Science
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 164
- Pages
- 108314
- ISSN
- 0010-938X (ISSN-L)
- OpenAlex
- W2988590925
- Cited by
- 217
- References
- 1
- FWCI
- 12.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting. https://app.cochat.ai/papers/10.1016/j.corsci.2019.108314
- The paper
- Cruz, V., Chao, Q., Birbilis, N., Fabijanic, D., Hodgson, P. D., & Thomas, S. (2020). Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting. Corrosion Science. https://doi.org/10.1016/j.corsci.2019.108314
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.