Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 190

The DOI matches its Crossref record.

Interfacial polymerization of polyamide-aluminosilicate SWNT nanocomposite membranes for reverse osmosis

Open access
Baroña, Garry Nathaniel B., Lim, Joohwan, Choi, Mijin, Jung, Bumsuk · 2013 · Desalination

Abstract

A new method of single-pass flow which incorporates aluminosilicate single-walled nanotubes (SWNT) in a polyamide matrix was developed to fabricate thin film nanocomposite (TFN) membranes for low pressure reverse osmosis (RO) via interfacial polymerization. The TFN membranes were characterized using attenuated total reflectance–Fourier transform infrared (ATR–FTIR) and X-ray photoelectron spectroscopy (XPS) for the analysis of functional groups as well as composition of SWNTs. The typical morphology of polyamide layers was observed using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The introduction of SWNTs in polyamide active layer is evident with the proliferation of aluminum and silicon elements from XPS analysis. All membranes show the rugose structure with “leaf-like” outgrowths and the “ridge-and-valley” structure commonly observed in polyamide RO membranes. The hydrophilicity was increased as observed in the enhancement in water flux and pure water permeance, due to the presence of hydrophilic nanotubes. With the incorporation of the single-walled aluminosilicate nanotubes, higher permeate flux was achieved while sustaining high rejection of monovalent and divalent ions, typical of polyamide RO membrane.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.desal.2013.06.026

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 48

  1. Morgan, 1959, Interfacial polycondensation. II. Fundamentals of polymer formation at liquid interfaces, J. Polym. Sci., 40, 299, 10.1002/pol.1959.1204013702 · doi:10.1002/pol.1959.1204013702
  2. Cadotte, 1980, A new thin-film composite seawater reverse osmosis membrane, Desalination, 32, 25, 10.1016/S0011-9164(00)86003-8 · DOI · Paper page
  3. La, 2010, Novel thin film composite membrane containing ionizable hydrophobes: pH dependent reverseosmosis behavior and improved chlorine resistance, J. Mater. Chem., 20, 4615, 10.1039/b925270c · doi:10.1039/b925270c
  4. Yu, 2013, Thin-film composite nanofiltration membranes with improved acid stability prepared from naphthalene-1,3,6-trisulfonylchloride (NTSC) and trimesoyl chloride (TMC), Desalination, 315, 164, 10.1016/j.desal.2012.09.011 · doi:10.1016/j.desal.2012.09.011
  5. Kang, 2007, A novel method of surface modification on thin-film composite reverse osmosis membrane by grafting poly(ethylene glycol), Polymer, 48, 1165, 10.1016/j.polymer.2006.12.046 · doi:10.1016/j.polymer.2006.12.046
  6. Abu Tarboush, 2008, Preparation of thin-film-composite polyamide membranes for desalination using novel hydrophilic surface modifying macromolecules, J. Membr. Sci., 325, 166, 10.1016/j.memsci.2008.07.037 · doi:10.1016/j.memsci.2008.07.037
  7. Shintani, 2009, Effect of heat treatment on performance of chlorine-resistant polyamide reverse osmosis membranes, Desalination, 247, 370, 10.1016/j.desal.2008.09.003 · doi:10.1016/j.desal.2008.09.003
  8. Ghosh, 2008, Impacts of reaction and curing conditions on polyamide composite reverse osmosis membrane properties, J. Membr. Sci., 311, 34, 10.1016/j.memsci.2007.11.038 · DOI
  9. Li, 2010, Recent developments in reverse osmosis desalination membranes, J. Mater. Chem., 20, 4551, 10.1039/b924553g · DOI · Paper page
  10. Baglio, 2005, Zeolite-based composite membranes for high temperature direct methanol fuel cells, J. Appl. Electrochem., 35, 207, 10.1007/s10800-004-6202-z · DOI
  11. Hashemifard, 2011, Mixed matrix membrane incorporated with large pore size halloysite nanotubes (HNTs) as filler for gas separation: morphological diagram, Chem. Eng. J., 172, 581, 10.1016/j.cej.2011.06.031 · doi:10.1016/j.cej.2011.06.031
  12. Liu, 2011, Improved performance of PDMS/ceramic composite pervaporation membranes by ZSM-5 homogeneously dispersed in PDMS via a surface graft/coating approach, Chem. Eng. J., 174, 495, 10.1016/j.cej.2011.06.004 · doi:10.1016/j.cej.2011.06.004
  13. Sholl, 2006, Making high-flux membranes with carbon nanotubes, Science, 312, 1003, 10.1126/science.1127261 · DOI · Paper page
  14. Lind, 2010, Tailoring the structure of thin film nanocomposite membranes to achieve seawater RO membrane performance, Environ. Sci. Technol., 44, 8230, 10.1021/es101569p · DOI · Paper page
  15. Fathizadeh, 2011, Effect of added NaX nano-zeolite into polyamide as a top thin layer of membrane on water flux and salt rejection in a reverse osmosis process, J. Membr. Sci., 375, 88, 10.1016/j.memsci.2011.03.017 · DOI · Paper page
  16. Singh, 2008, Characterization of physical structure of silica nanoparticles encapsulated in polymeric structure of polyamide films, J. Colloid Interface Sci., 326, 176, 10.1016/j.jcis.2008.07.025 · DOI
  17. Lee, 2007, Silver nanoparticles immobilized on thin film composite polyamide membrane: characterization, nanofiltration, antifouling properties, Polym. Adv. Technol., 18, 562, 10.1002/pat.918 · DOI · Paper page
  18. Kim, 2012, Development of nanosilver and multi-walled carbon nanotubes thin-film nanocomposite membrane for enhanced water treatment, J. Membr. Sci., 394–395, 37, 10.1016/j.memsci.2011.11.041 · DOI · Paper page
  19. Jeong, 2007, Interfacial polymerization of thin film nanocomposites: a new concept for reverse osmosis membranes, J. Membr. Sci., 294, 1, 10.1016/j.memsci.2007.02.025 · DOI · Paper page
  20. Sholl, 2006, Materials Science: making high-flux membranes with carbon nanotubes, Science, 312, 1003, 10.1126/science.1127261 · DOI · Paper page
  21. Majumder, 2005, Nanoscale hydrodynamics: enhanced flow in carbon nanotubes, Nature, 438, 44, 10.1038/438044a · DOI · Paper page
  22. Farmer, 1983, Synthetic imogolite: properties, synthesis, and possible application, Clay Miner., 18, 459, 10.1180/claymin.1983.018.4.11 · doi:10.1180/claymin.1983.018.4.11
  23. Cradwick, 1972, Imogolite, a hydrated aluminium silicate of tubular structure, Nature, 240, 187
  24. Ohashi, 2004, Characterization of synthetic imogolite nanotubes as gas storage, J. Mater. Sci., 39, 1799, 10.1023/B:JMSC.0000016188.04444.36 · doi:10.1023/b:jmsc.0000016188.04444.36
  25. Belorizky, 2010, Almost ideal 1D water diffusion in imogolite nanotubes evidenced by NMR relaxometry, Chem. Phys. Chem., 11, 2011
  26. Creton, 2008, Molecular dynamics study of hydrated imogolite. 2. Structure and dynamics of confined water, Phys. Chem. Chem. Phys., 10, 4879, 10.1039/b803479f · DOI
  27. Yamamoto, 2005, Preparation and properties of [poly(methyl methacrylate)/imogolite] hybrid via surface modification using phosphoric acid ester, Polymer, 46, 12386, 10.1016/j.polymer.2005.10.108 · doi:10.1016/j.polymer.2005.10.108
  28. Yang, 2007, Microtubes via assembly of imogolite with polyelectrolyte, Chem. Mater., 19, 3087, 10.1021/cm0711008 · doi:10.1021/cm0711008
  29. Kang, 2012, Single-walled aluminosilicate nanotube/poly(vinyl alcohol) nanocomposite membranes, ACS Appl. Mater. Interfaces, 4, 965, 10.1021/am201614w · DOI
  30. Yamamoto, 2005, Transparent polymer nanohybrid prepared by in situ synthesis of aluminosilicate nanofibers in poly(vinyl alcohol) solution, Soft Matter, 1, 372, 10.1039/b508669h · doi:10.1039/b508669h
  31. Ghosh, 2009, Impacts of support membrane structure and chemistry on polyamide–polysulfone interfacial composite membranes, J. Membr. Sci., 336, 140, 10.1016/j.memsci.2009.03.024 · DOI · Paper page
  32. Baroña, 2007, Negatively charged poly(vinylidene fluoride) microfiltration membranes by sulfonation, J. Membr. Sci., 290, 46, 10.1016/j.memsci.2006.12.013 · doi:10.1016/j.memsci.2006.12.013
  33. Wada, 1970, High resolution electron micrographs of imogolite, Clay Miner., 8, 487, 10.1180/claymin.1970.008.4.11 · doi:10.1180/claymin.1970.008.4.11
  34. Ackerman, 1993, Gas/vapor adsorption in imogolite: a microporous tubular aluminosilicate, Langmuir, 9, 1051, 10.1021/la00028a029 · doi:10.1021/la00028a029
  35. Liz-Marzan, 1995, Stable hydrosol of metallic and bimetallic nanoparticles immobilized on imogolite fibers, J. Phys. Chem., 99, 15120, 10.1021/j100041a031 · DOI · Paper page
  36. Horvath, 1983, Method for the calculation of effective pore size distribution in molecular sieve carbon, J. Chem. Eng. Jpn., 16, 470, 10.1252/jcej.16.470 · DOI · Paper page
  37. Konduri, 2007, Controlling nanotube dimensions: correlation between composition, diameter, and internal energy of single-walled mixed oxide nanotubes, ACS Nano, 1, 393, 10.1021/nn700104e · doi:10.1021/nn700104e
  38. Mukherjee, 2005, Phenomenology of the growth of single-walled aluminosilicate and aluminogermanate nanotubes of precise dimensions, Chem. Mater., 17, 4900, 10.1021/cm0505852 · doi:10.1021/cm0505852
  39. Jin, 2011, Spectroscopic study on water diffusion in aromatic polyamide thin film, J. Membr. Sci., 379, 121, 10.1016/j.memsci.2011.05.055 · doi:10.1016/j.memsci.2011.05.055
  40. Lind, 2009, Influence of zeolite crystal size on zeolite–polyamide thin film nanocomposite membranes, Langmuir, 25, 10139, 10.1021/la900938x · DOI · Paper page
  41. Saha, 2009, Performance evaluation of thin film composite polyamide nanofiltration membrane with variation in monomer type, J. Membr. Sci., 342, 60, 10.1016/j.memsci.2009.06.025 · doi:10.1016/j.memsci.2009.06.025
  42. Kim, 2005, Positron annihilation spectroscopic evidence to demonstrate the flux-enhancement mechanism in morphology-controlled thin-film-composite (TFC) membrane, Environ. Sci. Technol., 39, 1764, 10.1021/es049453k · doi:10.1021/es049453k
  43. Peeters, 1998, Retention measurements of nanofiltration membranes with electrolyte solutions, J. Membr. Sci., 145, 199, 10.1016/S0376-7388(98)00079-9 · DOI
  44. Schaep, 2001, Modelling the retention of ionic components for different nanofiltration membranes, Sep. Purif. Technol., 22–23, 169, 10.1016/S1383-5866(00)00163-5 · DOI · Paper page
  45. Gustafsson, 2001, The surface chemistry of imogolite, Clays Clay Miner., 49, 73, 10.1346/CCMN.2001.0490106 · DOI
  46. Fornasiero, 2008, Ion exclusion by sub-2-nm carbon nanotube pores, Proc. Natl. Acad. Sci. U. S. A., 105, 17250, 10.1073/pnas.0710437105 · DOI · Paper page
  47. Tansel, 2012, Significance of thermodynamic and physical characteristics on permeation of ions during membrane separation: hydrated radius, hydration free energy and viscous effects, Sep. Purif. Technol., 86, 119, 10.1016/j.seppur.2011.10.033 · DOI · Paper page
  48. Schaep, 1998, Influence of ion size and charge in nanofiltration, Sep. Purif. Technol., 14, 155, 10.1016/S1383-5866(98)00070-7 · DOI · Paper page

Cited by

See all 190

Metadata

Authors
Baroña, G. N. B., Lim, J., Choi, M., & Jung, B.
Venue
Desalination
Publisher
Elsevier BV
Published
2013-09
Volume
325
Pages
138-147
ISSN
0011-9164 (ISSN-L)
OpenAlex
W2085397070
Cited by
190
References
0
FWCI
12.33
Type
journal article
Language
en
Open access
hybrid
Licence
Funders
  • Basic Science Research Program
  • National Research Foundation (NRF) of Korea
  • Ministry of Education, Science and Technology (2012R1A1A2006821, 2011-0032169)
  • Korea CCS R&D Center (KCRC)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Interfacial polymerization of polyamide-aluminosilicate SWNT nanocomposite membranes for reverse osmosis. https://app.cochat.ai/papers/10.1016/j.desal.2013.06.026
The paper
Baroña, G. N. B., Lim, J., Choi, M., & Jung, B. (2013). Interfacial polymerization of polyamide-aluminosilicate SWNT nanocomposite membranes for reverse osmosis. Desalination. https://doi.org/10.1016/j.desal.2013.06.026

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.