CoChat

Surface dissolution: Minimizing groundwater impact and leakage risk simultaneously

Open access
Burton, McMillan, Bryant, Steven L. · 2009 · Energy Procedia
Cited by 39

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Any substantive campaign to mitigate greenhouse gas emissions must involve sequestration of CO2 in geologic formations. For stakeholders to accept this technology, the risk of leakage from the storage formation must be balanced against the economics of capture and injection. The standard approach to geologic sequestration assumes that CO2 will be injected as a bulk phase into a saline aquifer. The primary driver for leakage in this approach is the buoyancy of CO2 relative to native brine under typical deep reservoir conditions. If no leakage occurs, the primary impact of storage will be the displacement of large volumes of groundwater, equal to the volume of CO2 injected at reservoir conditions. Here we investigate an alternative storage approach that alleviates these concerns. The incremental cost of this approach over the standard approach therefore sets an upper bound on reasonable costs for monitoring and verification of the standard storage scheme and for avoiding groundwater contamination. We analyze a prototypical process in which the brine to be used as solvent is extracted from the target aquifer. Captured CO2 is dissolved into this brine in a surface facility prior to injection into the aquifer. Wells are arranged in a line-drive pattern, i.e. a row of injectors separated from a parallel row of extraction wells. The CO2-laden brine is slightly denser than brine containing no CO2, so ensuring the complete dissolution of all CO2 at the surface eliminates the risk of buoyancy-driven leakage. The pairing of extraction/injection wells controls the plume movement and reduces the likelihood of exceeding pressure limits during injection. The volume occupied by saturated brine is about 5% greater than the volume of the original brine. This incremental volume results in a net displacement volume 40% smaller than the volume of water displaced in when bulk-phase CO2 is injected. Surface dissolution thus reduces the overall footprint of a storage project and reduces impact on groundwater resources. The process can be implemented at a greater range of depths than the standard approach. The operational costs of surface dissolution are estimated to be 20% greater than for the standard process if CO2 capture is accomplished with monoethanolamine. The capital costs are 50% greater, mainly because of the larger number of wells needed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.egypro.2009.02.169

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

See all 39

Metadata

Authors
Burton, M., & Bryant, S. L.
Venue
Energy Procedia
Publisher
Elsevier BV
Published
2009-02
Volume
1
Issue
1
Pages
3707-3714
ISSN
1876-6102 (ISSN-L)
OpenAlex
W2062615109
Cited by
39
References
1
FWCI
4.44
Type
conference paper
Language
en
Open access
diamond

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Surface dissolution: Minimizing groundwater impact and leakage risk simultaneously. https://app.cochat.ai/papers/10.1016/j.egypro.2009.02.169
The paper
Burton, M., & Bryant, S. L. (2009). Surface dissolution: Minimizing groundwater impact and leakage risk simultaneously. Energy Procedia. https://doi.org/10.1016/j.egypro.2009.02.169

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.