On the development of Vacuum Swing adsorption (VSA) technology for post-combustion CO2 capture
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
A metal-organic framework, UiO-66, has been evaluated as adsorbent in a post-combustion vacuum swing adsorption (VSA) process. Equilibrium isotherms of the most relevant gases (CO2 and N2) as well as breakthrough curves measured using synthetic flue gas containing 15 mol% CO2 without and with 9 mol% water vapor are reported. Based on the breakthrough data, a six step one-column VSA cycle is designed and the effects of adsorption and CO2 rinse times used on the CO2 recovery and CO2 purity are examined. With the chosen process configuration and cycle design CO2 purities around 60% and CO2 recoveries up to 70% are achieved. 50 cycle adsorption-desorption experiments show that the cyclic CO2 capacity is reduced by approximately 25% in the presence of water vapor. No reduction in cyclic capacity is observed with increased cycle number; there is rather a slight increase in cyclic capacity with cycle number indicating that a cyclic steady state still not has been reached after 50 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889 · cited 1×
“Metal-organic frameworks (MOF) is a new class of adsorbents attracting interest for selective CO2 separation [5].”
BackgroundReducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566 · cited 1×
“In this context adsorption processes using Pressure or Vacuum Swing Adsorption (PSA/VSA) are attracting interest as energy requirements are lower [1][2].”
Method
Cited by
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
Porous organic polymers for CO2capture, separation and conversion
Song, K. S., Fritz, P. W., & Coskun, A. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00727d · Cited by 409
Catalytic Zirconium/Hafnium-Based Metal–Organic Frameworks
Rimoldi, M., Howarth, A. J., DeStefano, M. R., Lin, L., Goswami, S., Li, P., Hupp, J. T., & Farha, O. K. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b02923 · Cited by 332
CO2 Capture in Metal–Organic Framework Adsorbents: An Engineering Perspective
Hu, Z., Wang, Y., Shah, B. B., & Zhao, D. (2019) · Advanced Sustainable Systems · doi:10.1002/adsu.201800080 · Cited by 297
Metadata
- Authors
- Andersen, A., Divekar, S., Dasgupta, S., Cavka, J. H., Aarti, Nanoti, A., Spjelkavik, A., Goswami, A. N., Garg, M. O., & Blom, R.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2013
- Volume
- 37
- Pages
- 33-39
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W2070227360
- Cited by
- 41
- References
- 2
- FWCI
- 5.89
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the development of Vacuum Swing adsorption (VSA) technology for post-combustion CO2 capture. https://app.cochat.ai/papers/10.1016/j.egypro.2013.05.082
- The paper
- Andersen, A., Divekar, S., Dasgupta, S., Cavka, J. H., Aarti, Nanoti, A., Spjelkavik, A., Goswami, A. N., Garg, M. O., & Blom, R. (2013). On the development of Vacuum Swing adsorption (VSA) technology for post-combustion CO2 capture. Energy Procedia. https://doi.org/10.1016/j.egypro.2013.05.082
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.