Thermal Modeling of Melting of Nano based Phase Change Material for Improvement of Thermal Energy Storage
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
A two dimensional numerical model is developed for melting of a nano based phase change material (PCM) such as n-octadecane with CuO nanoparticle in a square cavity. The governing equations are discretized using Finite Volume Method (FVM). The flow equations are solved using SIMPLER algorithm. Tri-Diagonal Matrix Algorithm (TDMA) is used to solve the corresponding algebraic equations. Enthalpy porosity technique is used to capture the position of the moving melt front. The melting of nano based phase change material with varying volume fractions of nanoparticles is studied to investigate the heat transfer enhancement during the melting process through dispersion of nanoparticles. The effect of some significant parameters, namely melting front progression, volume fraction of nanoparticle, heated left wall temperature, heat transfer rate and melting time are studied. The results obtained are represented graphically to study the nature and behavior of the parameters when are presented in terms of temperature, velocity profiles, moving interface position and solid fraction. Finally, it is concluded that addition of nanoparticles enhances the thermal conductivity as compared to conventional phase change material, resulting in a relatively higher heat transfer and a faster melting rate. In addition, with the rise in heat transfer rate of the nanofluid the melting time eventually decreased as the volume fraction of nanoparticles increased. Increase in difference between the melting temperature and the hot wall temperature fastened the melting process of the nano based PCM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Melting and Solidification of a Pure Metal on a Vertical Wall
Gau, C., & Viskanta, R. (1986) · Journal of Heat Transfer · doi:10.1115/1.3246884 · Cited by 655
Cited by
Heyhat, M. M., Mousavi, S., & Siavashi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101235 · Cited by 527
Eanest Jebasingh, B., & Valan Arasu, A. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.031 · Cited by 477
Nanoparticles enhanced phase change materials (NePCMs)-A recent review
Tariq, S. L., Ali, H. M., Akram, M. A., Janjua, M. M., & Ahmadlouydarab, M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115305 · Cited by 405
Maher, H., Rocky, K. A., Bassiouny, R., & Saha, B. B. (2021) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2020.100797 · Cited by 53
Metadata
- Authors
- Sushobhan, B. R., & Kar, S. P.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2017-03
- Volume
- 109
- Pages
- 385-392
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W2596340257
- Cited by
- 48
- References
- 2
- FWCI
- 10.95
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.