Oxygen reduction reaction activities of Ni/Pt(111) model catalysts fabricated by molecular beam epitaxy
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Oxygen reduction reaction (ORR) activities were evaluated for clean Pt(111) and Ni/Pt(111) model catalysts fabricated by molecular beam epitaxy. Exposure of clean Pt(111) to 1.0 L CO at 303 K produced linear-bonded and bridge-bonded CO-Pt IR bands at 2093 and 1858 cm− 1. In contrast, 0.3-nm-thick Ni deposited on Pt(111) at 573 K (573 K-Ni0.3 nm/Pt(111)) produced broad IR bands for adsorbed CO at around 2070 cm− 1; the separation of reflection high-energy electron diffraction (RHEED) streaks is slightly wider for 573 K-Ni0.3 nm/Pt(111) than for the clean Pt(111). For 823 K-Ni0.3 nm/Pt(111), the separation of the RHEED streaks is the same as that for the Pt(111), and a single sharp IR band due to adsorbed CO is located at 2082 cm− 1. The results suggest that for the 823 K-Ni0.3 nm/Pt(111), a Pt-enriched outermost surface (Pt-skin) was formed through surface segregation of the substrate Pt atoms. ORR activities for the 573 K- and 823 K-Ni0.3 nm/Pt(111) as determined from linear sweep voltammetry curves were five times and eight times higher than that for clean Pt(111), respectively, demonstrating that Pt-skin generation is crucial for developing highly active electrode catalysts for fuel cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces
Stamenkovic, V. R., Mun, B. S., Arenz, M., Mayrhofer, K. J. J., Lucas, C. A., Wang, G., Ross, P. N., & Markovic, N. M. (2007) · Nature Materials · doi:10.1038/nmat1840 · Cited by 3,252
Wang, J. X., Inada, H., Wu, L., Zhu, Y., Choi, Y., Liu, P., Zhou, W.-P., & Adzic, R. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9067645 · Cited by 719
Cited by
Mesostructured thin films as electrocatalysts with tunable composition and surface morphology
van der Vliet, D. F., Wang, C., Tripkovic, D., Strmcnik, D., Zhang, X. F., Debe, M. K., Atanasoski, R. T., Markovic, N. M., & Stamenkovic, V. R. (2012) · Nature Materials · doi:10.1038/nmat3457 · Cited by 356
Probing the nanoscale structure of the catalytically active overlayer on Pt alloys with rare earths
Pedersen, A. F., Ulrikkeholm, E. T., Escudero-Escribano, M., Johansson, T. P., Malacrida, P., Pedersen, C. M., Hansen, M. H., Jensen, K. D., Rossmeisl, J., Friebel, D., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.026 · Cited by 66
Alia, S. M., Ha, M.-A., Ngo, C., Anderson, G. C., Ghoshal, S., & Pylypenko, S. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c01568 · Cited by 40
Rational Design of Competitive Electrocatalysts for Hydrogen Fuel Cells
Stolbov, S., & Alcántara Ortigoza, M. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201551e · Cited by 16
Metadata
- Authors
- Wadayama, T., Todoroki, N., Yamada, Y., Sugawara, T., Miyamoto, K., & Iijama, Y.
- Venue
- Electrochemistry Communications
- Publisher
- Elsevier BV
- Published
- 2010-08
- Volume
- 12
- Issue
- 8
- Pages
- 1112-1115
- ISSN
- 1388-2481 (ISSN-L)
- OpenAlex
- W2085347406
- Cited by
- 76
- References
- 2
- FWCI
- 2.82
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.