The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Porous anodic alumina formed by anodization of aluminum alloy (AA1050) and high purity aluminum
Open accessAbstract
A two-step anodization process performed at 0 °C was used to prepare highly ordered porous anodic alumina on the AA1050 alloy and high purity aluminum foil. The anodizing of both substrates was carried out in 0.3 M sulfuric acid and 0.3 M oxalic acid baths at 25 V and 40 V, respectively. The effect of the extended duration of the second anodizing step on pore order degree and structural features of AAO membranes was studied. The presence of alloying elements affects not only the rate of oxide growth but also the microstructure of the anodic film. It was found that pore circularity and regularity of pore arrangement in AAO membranes formed on the AA1050 alloy were always worse than those observed on the pure Al substrate. The structural features, such as pore diameter, interpore distance, wall thickness, barrier layer thickness, porosity and pore density of porous anodic alumina formed on AA1050 are a little different from those obtained for high purity Al. The extended time of the second anodizing step, up to 16 h does not affect significantly the regularity of pore order and all structural features of AAO membranes, independently of the anodizing electrolyte.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Biosensors - Sensor Principles and Architectures
Grieshaber, D., MacKenzie, R., Vörös, J., & Reimhult, E. (2008) · Sensors · doi:10.3390/s80314000 · Cited by 2,329
Cited by
Progress in Nano-Engineered Anodic Aluminum Oxide Membrane Development
Poinern, G. E. J., Ali, N., & Fawcett, D. (2011) · Materials · doi:10.3390/ma4030487 · Cited by 378
Metadata
- Authors
- Zaraska, L., Sulka, G. D., Szeremeta, J., & Jaskuła, M.
- Venue
- Electrochimica Acta
- Publisher
- Elsevier BV
- Published
- 2010-05
- Volume
- 55
- Issue
- 14
- Pages
- 4377-4386
- ISSN
- 0013-4686 (ISSN-L)
- OpenAlex
- W2024373254
- Cited by
- 188
- References
- 1
- FWCI
- 4.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.