CoChat

Thermocapillary convection during hydrogen evolution at microelectrodes

Massing, Julian, Mutschke, Gerd, Baczyzmalski, Dominik, Hossain, Syed Sahil, Yang, Xuegeng, Eckert, Kerstin, Cierpka, Christian · 2019 · Electrochimica Acta
Cited by 102

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

The origin of strong electrolyte flow during water electrolysis is investigated, that arises at the interface between electrolyte and hydrogen bubbles evolving at microelectrodes. This Marangoni convection was unveiled only recently (Yang et al., PCCP, 2018, [1]) and is supposed to be driven by shear stress at the gas-liquid interface caused by thermal and concentration gradients. The present work firstly allows a quantification of the thermocapillary effect and discusses further contributions to the Marangoni convection which may arise also from the electrocapillary effect. Hydrogen gas bubbles were electrolytically generated at a horizontal Pt microelectrode in a 1 M H2SO4 solution. Simultaneous measurements of the velocity and the temperature field of the electrolyte close to the bubble interface were performed by means of particle tracking velocimetry and luminescent lifetime imaging. Additionally, corresponding numerical simulations of the temperature distribution in the cell and the electrolyte flow resulting from thermocapillary stress only were performed. The results confirm significant Ohmic heating near the micro-electrode and a strong flow driven along the interface away from the microelectrode. The results further show an excellent match between simulation and experiment for both the velocity and the temperature field within the wedge-like electrolyte volume at the bubble foot close to the electrode, thus indicating the thermocapillary effect as the major driving mechanism of the convection. Further away from the microelectrode, but still below the bubble equator, however, quantitative differences between experiment and simulation appear in the velocity field, whereas the temperature gradient still matches well. Thus, additional effects must act on the interface, which are not yet included in the present simulation. The detailed discussion tends to rule out solution-based effects, generally referred to as solutal effects, whereas electrocapillary effects are likely to play a role. Finally, the thermocapillary effect is found to exert a force on the bubble which is retarding its departure from the electrode.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.electacta.2018.11.187

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 102

Metadata

Authors
Massing, J., Mutschke, G., Baczyzmalski, D., Hossain, S. S., Yang, X., Eckert, K., & Cierpka, C.
Venue
Electrochimica Acta
Publisher
Elsevier BV
Published
2019-02
Volume
297
Pages
929-940
ISSN
0013-4686 (ISSN-L)
OpenAlex
W2902890555
Cited by
102
References
1
FWCI
2.76
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.