Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building

ASHRAE Handbook—1981 Fundamentals

(1981) · Building Services Engineering Research and Technology · doi:10.1177/014362448100200409 · Cited by 3,398

A review on phase change materials integrated in building walls

Kuznik, F., David, D., Johannes, K., & Roux, J.-J. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.019 · Cited by 1,061

Phase change materials for building applications: A state-of-the-art review

Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 1,048

Use of microencapsulated PCM in concrete walls for energy savings

Cabeza, L. F., Castellón, C., Nogués, M., Medrano, M., Leppers, R., & Zubillaga, O. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2006.03.030 · Cited by 890

Phase change material-based building architecture for thermal management in residential and commercial establishments

Pasupathy, A., Velraj, R., & Seeniraj, R. V. (2006) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.010 · Cited by 559

Re-inventing air heating: Convenient and comfortable within the frame of the Passive House concept

Feist, W., Schnieders, J., Dorer, V., & Haas, A. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.06.020 · Cited by 374

Dynamic characteristics and energy performance of buildings using phase change materials: A review

Zhu, N., Ma, Z., & Wang, S. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.08.019 · Cited by 346

A review of indices for the long-term evaluation of the general thermal comfort conditions in buildings

Carlucci, S., & Pagliano, L. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.06.015 · Cited by 225

Improvement of the thermal behaviour of gypsum blocks by the incorporation of microcapsules containing PCMS obtained by suspension polymerization with an optimal core/coating mass ratio

Borreguero, A. M., Carmona, M., Sánchez-Silva, L., Valverde, J. L., & Rodríguez, J. F. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.01.032 · Cited by 159

Applications of Phase Change Material in highly energy-efficient houses

Rodríguez-Ubiñas, E., Ruiz-Valero, L., Sánchez, S. V., & Neila, J. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.03.018 · Cited by 157

Effect of Phase Change Materials on the Thermal Performance of Residential Building Located in Different Cities of a Tropical Rainforest Climate Zone

Sheriyev, A., Memon, S. A., Adilkhanova, I., & Kim, J. R. (2021) · Energies · doi:10.3390/en14092699 · Cited by 13

Shear‐Responsive Sol–Gel Transition of Phase Change Material Emulsions for an Injectable Thermal Insulation Platform

Sun, J., Yang, J., Jeon, D., Park, D., & Kim, J. W. (2023) · Small · doi:10.1002/smll.202304120 · Cited by 13

Comparison of heavy building envelopes and PCM: Impact on indoor temperature peaks and cooling energy use during heat events

Kuczyński, T., Staszczuk, A. K., & Gortych, M. (2025) · Energy · doi:10.1016/j.energy.2025.136213 · Cited by 13

Thermal Comfort—Case Study in a Lightweight Passive House

Wąs, K., Radoń, J., & Sadłowska-Sałęga, A. (2022) · Energies · doi:10.3390/en15134687 · Cited by 13

The Effect of the Thermal Mass of the Building Envelope on Summer Overheating of Dwellings in a Temperate Climate

Kuczyński, T., Staszczuk, A. K., Ziembicki, P., & Paluszak, A. (2021) · Energies · doi:10.3390/en14144117 · Cited by 13

New model for PCM melting and solidification processes simulation

Bouzgarrou, F., Alqahtani, T., Algarni, S. A., Mellouli, S., Askri, F., Saleel, C. A., Kolsi, L., & Jemni, A. (2021) · Physica Scripta · doi:10.1088/1402-4896/ac237e · Cited by 12

Energetic Performance Evaluation of Walls Incorporating Phase Change Material (PCM) Under Semi-Arid Climate of Benguerir City

Salihi, M., Fiti, M. E., Harmen, Y., Chhiti, Y., Chebak, A., Srhir, B., Alaoui, F. E. M., Achak, M., & Jama, C. (2021) · International Renewable and Sustainable Energy Conference (IRSEC) · doi:10.1109/irsec53969.2021.9741121 · Cited by 11

Thermal Comfort in Buildings: Scientometric Analysis and Systematic Review

Horr, Y. A., Arif, M., Kaushik, A. K., Arsalan, H., Mazroei, A., & Rana, M. Q. (2023) · Journal of Architectural Engineering · doi:10.1061/jaeied.aeeng-1490 · Cited by 14

From lab to building: Real-world integration of phase change materials for comfort, energy, and flexibility

Attia, S., Hammouma, T., Galeone, D., Zhang, Z., Zhang, N., Corrado, V., & Yuan, Y. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116813 · Cited by 12

Numerical Investigation on Phase Change Material (PCM) for Thermal Management Buildings Using Design-Builder Software

Abuthakeer, S. S., Arunkumar, D., Ramu, M., & Sripriyan, K. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-981-19-3866-5_49 · Cited by 10

Winter Thermal Resilience of Lightweight and Ground-Coupled Mediumweight Buildings: An Experimental Study During Heating Outages

Gortych, M., & Kuczyński, T. (2025) · Energies · doi:10.3390/en18154022 · Cited by 10

Energy and economic analysis of utilizing phase change materials and thermochromic coating in a building

Yuan, X., Zheng, L., & Lin, D. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.119700 · Cited by 9

Numerical Study on Energy-Saving Performance of a New Type of Phase Change Material Room

Ye, R., Fang, X., & Zhang, Z. (2021) · Energies · doi:10.3390/en14133874 · Cited by 9

Cost-Related Drivers and Barriers of Passivhaus: A Systematic Literature Review

Panchalingam, K., Rasheed, E. O., & Rotimi, J. O. B. (2024) · Sustainability · doi:10.3390/su16156510 · Cited by 8

Thermal Performance of Hollow-Core Slab Ventilation System with Macro-Encapsulated Phase-Change Materials in Supply Air Duct

Jamil, H., Alam, M., & Sanjayan, J. (2019) · Buildings · doi:10.3390/buildings9020051 · Cited by 8

Nanostructures encapsulated phase-change materials for sustained thermal energy storage in concrete

Shah, K. W., & Huseien, G. F. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823296-5.00002-2 · Cited by 8

Uncertainty analysis of PCM-enhanced systems for reliable prediction of thermal capacity using stochastic finite element method

Koniorczyk, M., Jabłoński, M., Bednarska, D., Omrani, I. A. N., Konca, P., & Barz, T. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111923 · Cited by 7

Outdoor testbeds for studies on performance of building envelopes: review and recommendations

Jin, Q., Sun, Q., & Meng, G. (2024) · Science and Technology for the Built Environment · doi:10.1080/23744731.2024.2378677 · Cited by 8

Energy Savings of PCM-Incorporated Building in Hot Dry Climate

Sovetova, M., Memon, S. A., & Kim, J. R. (2019) · Key engineering materials · doi:10.4028/www.scientific.net/kem.821.518 · Cited by 7

Influence of User Behaviour on the Functioning and Performance of Passive Phase-Change Material Systems after More Than a Decade of Operation

Obergfell, T., Gölz, S., Haussmann, T., Gschwander, S., & Wagner, A. (2022) · Buildings · doi:10.3390/buildings12111797 · Cited by 6

ENERGY AND FEASIBILITY ANALYSIS OF APPLYING BIO-BASED PHASE CHANGE MATERIALS TO BUILDINGS IN EAST ASIA

Gassar, A. A. A., Yun, G. Y., Kim, S., & Han, C.-H. (2020) · Journal of Green Building · doi:10.3992/1943-4618.15.2.157 · Cited by 6

Study of phase change material on alleviating building overheating risk in cold regions of China

Yu, Y., Zhao, B., Yu, J., Xu, Y., Chang, W., Chen, Y., & Guo, H. (2024) · Building Research & Information · doi:10.1080/09613218.2024.2347907 · Cited by 5

Optimal HVAC scheduling using phase-change material as a demand response resource

Azuatalam, D., Mhanna, S., Chapman, A. C., & Verbič, G. (2017) · IEEE Innovative Smart Grid Technologies-Asia · doi:10.1109/isgt-asia.2017.8378315 · Cited by 5

Validation of a PCM simulation tool in IDA ICE dynamic building simulation software using experimental data from solar test boxes

Cornaro, C., Pierro, M., Roncarati, D., & Puggioni, V. A. (2023) · Cineca Institutional Research Information System (Tor Vergata University) · doi:10.13124/9788860461360_20 · Cited by 5

Numerical Study of Application of PCM for a Passive Thermal Energy Storage System for Space Cooling in Residential Buildings

Ručevskis, S., Akishin, P., & Korjakins, A. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/603/4/042011 · Cited by 4

Mechanical and Thermal Properties of Thermally Conductive Enhanced Paraffin/Gypsum Composites

Chen, C., Wang, H., Wang, Y., Chen, Y., & Jiu, S. (2023) · Processes · doi:10.3390/pr11040999 · Cited by 4

Phase change materials to improve the energy savings of wood building envelopes in Quebec

Li, B., Chhaybi, I., Rodrigue, D., Berg, S., Sandberg, D., Huber, J. A. J., Li, D., & Wang, X. A. (2024) · Wood Material Science and Engineering · doi:10.1080/17480272.2024.2415975 · Cited by 4

A numerical study on applying the movable PCM design to disaster‐relief prefabricated temporary houses used in different climate regions to improve indoor thermal environments in summer

Wang, C. (2022) · International Journal of Energy Research · doi:10.1002/er.7988 · Cited by 4

The Strategy of Using PCMs in Building Sector Applications

Ismail, R. M., Megahed, N. A., & Eltarabily, S. (2022) · Port-Said Engineering Research Journal · doi:10.21608/pserj.2022.135558.1185 · Cited by 4

ANÁLISIS DE LA SIMULACIÓN Y MONITOREO REAL DE UN INVERNADERO EN LA IMPLICACIÓN TÉRMICA DE UN EDIFICIO. UN CASO PRÁCTICO.

Puertolas, R. F., Arrebola, C. V., & Losada, J. C. (2017) · DYNA · doi:10.6036/8202 · Cited by 4

From Technological Sustainability to Social Sustainability: An Analysis of Hotspots and Trends in Residential Design Evaluation

Song, M., Cai, J., & Xue, Y. (2023) · Sustainability · doi:10.3390/su151310088 · Cited by 3

Mechanical and thermal performance of concrete with embedded organic and inorganic PCMs for building applications

Arachchi, K. A. D. Y. T. K., Mirza, O., MASHIRI, F. R., Pathirana, S. W., & Camille, C. (2026) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2026.104478 · Cited by 2

Numerical model of applying PCM boards for energy saving in lightweight buildings in Shanghai

Wang, H., Lu, W. J., & Wu, Z. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/556/1/012014 · Cited by 2

Impact of Uninsulated Slab-on-Grade and Masonry Walls on Residential Building Overheating

Kuczyński, T., & Staszczuk, A. K. (2023) · Energies · doi:10.3390/en16227558 · Cited by 2

IDENTIFYING THE IMPACT OF BUILDING CHARACTERISTICS ON INDOOR OVERHEATING: A SYSTEMATIC REVIEW

Keles, C., & Hoque, S. (2025) · Journal of Green Building · doi:10.3992/jgb.20.1.285 · Cited by 2

Properties of a Solid–Solid Phase Change Material PAN/SA-LA/ZMS

Guo, J., You, X. K., Zhang, L., Xiang, H., Zhang, S., & Liu, Y. F. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.703.3 · Cited by 2

FAZNO PROMENLJIVI MATERIJALI – INOVATIVNI MATERIJALI ZA POBOLJŠANJE ENERGETSKE EFIKASNOSTI OBJEKATA

Topličić–Ćurčić, G., Keković, A., Grdić, D., Đorić-Veljković, S., & Grdić, Z. (2018) · Zbornik radova Građevinskog fakulteta · doi:10.14415/konferencijagfs2018.032 · Cited by 1

Thermal Performance of Wood Frame Construction with Phase Change Material in the Brazilian Subtropical Climate

Vieira, J. C., Oliveira, R., Abreu, A. I., Różycki, M., Niemiec, T., & Sitarz, M. (2025) · Materials · doi:10.3390/ma18030681 · Cited by 1

Passive phase change materials integration in office buildings: Review on impact of HVAC operation controls on thermal performance

Gutiérrez, R. A., Audenaert, A., & Verbeke, S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.115026 · Cited by 1

Thermal performance profiling of phase change materials integrated building envelopes through simulation-data envelopment analysis approach

Rathore, I., Rajasekar, E., & Natarajan, S. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.120947 · Cited by 1

Thermal Performance of a New Type of Phase Change Material Room in Summer and Winter

Meng, E., Yu, H., Liu, C., Sun, Z., & Zhou, B. R. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.09.092 · Cited by 1

Investigation of heat transfer of the frame of entrance door encompassing phase change materials through computational fluid dynamics schemes

Solghar, A. A., Ahsaei, S. H., Iranmanesh, A., & Dehaj, M. S. (2023) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-023-1490-3 · Cited by 1

Analysis of Energy Efficiency Potential of Hollow Brick Building Envelope Filled with PCM

M’hamdi, Y., Baba, K., & Tajayouti, M. (2023) · Journal of Sustainability Research · doi:10.20900/jsr20230013 · Cited by 1

Enhancement of thermal performance of buildings using cementitious composites containing phase change material

Ramakrishnan, S. (2017) · Swinburne figshare (Swinburne University of Technology) · doi:10.25916/sut.26279047 · Cited by 1

Study on the indoor thermal environment affected by open window in passive building

Guo, Z., Zhang, W., Deng, G., & Guan, Y. (2023) · Building Simulation Conference proceedings · doi:10.26868/25222708.2023.1361 · Cited by 1

Underground Energy Storage Utilizing Building Concrete Foundation with PCMs: Experimental and Numerical Approach

Mousa, M. M. (2024) · doi:10.32920/25234738 · Cited by 1

Sensible Air to Air Heat Recovery Strategies in a Passive House

Rodriguez-Anderson, S. (2000) · doi:10.15760/etd.2121

Modelling and development of energy management system in a domestic building: Case study

Jones, O., Sprake, D., Vagapov, Y., & Borzistaya, E. (2017) · IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering · doi:10.1109/eiconrus.2017.7910583

Phase Change Materials for Thermal Management in Thermal Energy Storage Applications

Alqahtani, T. (2020)

Vol. 8 N. 1 (2022)

(2022) · Rivista Tema · doi:10.30682/tema0801

Performance Characterization of Novel Caisson-Based Thermal Storage for Ground Source Heat PumpsPreprint

Shukla, S., Bayomy, A. M., Antoun, S., Mwesigye, A., wang, J., Leong, W. H., & Dworkin, S. B. (2023) · doi:10.32920/22661605

Performance Characterization of Novel Caisson-Based Thermal Storage for Ground Source Heat PumpsPreprint

Shukla, S., Bayomy, A. M., Antoun, S., Mwesigye, A., wang, J., Leong, W. H., & Dworkin, S. B. (2023) · doi:10.32920/22661605.v1

Testing and comparison of an active dry wall with PCM against a traditional dry wall in a relevant operational environment

Imperadori, M., Santo, N. D., Cucuzza, M., Salvalai, G., Scoccia, R., & Vanossi, A. (2023) · Rivista Tema · doi:10.30682/tema0901i

Uncertainty Analysis of Pcm-Enhanced Systems for Reliable Prediction of Thermal Capacity Using Stochastic Finite Element MethodPreprint

Koniorczyk, M., Jabłoński, M., Bednarska, D., Omrani, I. A. N., & Konca, P. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4511182

Impact of Uninsulated Slab-on-Grade and Masonry Walls on Residential Thermal Comfort and Energy DemandPreprint

Kuczyński, T., & Staszczuk, A. K. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4569108

Uncertainty Analysis of Pcm-Enhanced Systems for Reliable Prediction of Thermal Capacity Using Stochastic Finite Element MethodPreprint

Koniorczyk, M., Jabłoński, M., Bednarska, D., Omrani, I. A. N., Konca, P., & Barz, T. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4635341

Investigation Into the Performance and Control of a Hydronic Floor Solar Energy Capture System in a Highly Glazed Canadian Home

Brown, S. G. (2023) · doi:10.22215/etd/2023-15728

Underground Energy Storage Utilizing Building Concrete Foundation with PCMs: Experimental and Numerical Approach

Mousa, M. M. (2024) · doi:10.32920/25234738.v1

Investigating the effect of the location of the building, relative to the neighboring buildings and the passage, on the amount of energy consumption (case example: common residential buildings in Tehran)

Zekavat, M., Tahbaz, M., & Hafezi, M. R. (2024) · Journal of Applied Research in Geographical Sciences · doi:10.61186/jgs.25.76.17

Use of Bio-Product/Phase Change Material Composite in the Building Envelope for Building Thermal Control and Energy Savings

Boozula, A. R. (2018) · doi:10.12794/metadc1248391

Exploratory analysis of PCM and thermal insulation strategies for buildings under future weather scenarios: Optimization of a residential prototype in the Global South – A case study in Brazil

Cruz, A. S., Bastos, L. E. G., Silvoso, M. M., Grabois, T. M., & Caldas, L. R. (2025) · Energy Efficiency · doi:10.1007/s12053-025-10389-z

Optimizing PCM-Enhanced Multi-Layer Roofs for Nearly Zero Energy Building Performance in Arid Climates

Hawraa, A. H., Tarish, A. L., & Al-Mudhafar, A. H. N. (2026) · Advanced materials research · doi:10.4028/p-hfydq9

Climate change impacts on urban thermal comfort across Japanese cities: Implications for resilient urban planning

Xiao, X., Jiao, Z., Sheng, S., & Yuan, J. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.110147

Effectiveness of passive cooling strategies for sustainable thermal regulation in residential buildings: a systematic review

Clement, F. D., Zhou, S., Soltani, A., Işınkaralar, Ö., & Işınkaralar, K. (2026) · Euro-Mediterranean Journal for Environmental Integration · doi:10.1007/s41207-026-01218-5

Large-scale parametric analysis of energy and CO2 reduction in PCM–EPS integrated residential buildings using an interpretable surrogate modeling

Poormohammadi, M., Mehrdadi, N., & Pazoki, M. (2026) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2026.102159

Year-round thermal regulation mechanisms and parameter optimisation of retro-reflective phase-change composite wall

Wang, C., Xu, S., Huang, K., Duan, K., Yan, T., & Ming, T. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.133418

Evaluation of Phase Change Materials for Cooling in a Super-Insulated Passive House

Lauck, J. (2000) · doi:10.15760/etd.1443 · Cited by 7

Phase Change Materials as a Thermal Storage Device for Passive Houses

Campbell, K. (2000) · doi:10.15760/etd.201 · Cited by 5

Energy-saving and overheating-mitigation effects of phase change materials on buildings in cold regions

Xu, Y., Zhao, B., Yu, J., Zhao, Y., Chang, W., & Guo, H. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116284 · Cited by 14

Energetic and thermal comfort assessment of phase change material passively incorporated building envelope in severe hot Climate: An experimental study

Al-Yasiri, Q. M. Q., & Szabó, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118957 · Cited by 111

Thermal performance analysis of a residential house equipped with Phase Change Material

Gounni, A., & Louahlia, H. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201912805004 · Cited by 2