The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Building energy metering and environmental monitoring – A state-of-the-art review and directions for future research
Open accessAbstract
Buildings are responsible for 40% of global energy use and contribute towards 30% of the total CO2 emissions. The drive to reduce energy consumption and associated greenhouse gas emissions from buildings has acted as a catalyst in the increasing installation of meters and sensors for monitoring energy use and indoor environmental conditions in buildings. This paper reviews the state-of-the-art in building energy metering and environmental monitoring, including their social, economic, environmental and legislative drivers. The integration of meters and sensors with existing building energy management systems (BEMS) is critically appraised, especially with regard to communication technologies and protocols such as ModBus, M-Bus, Ethernet, Cellular, ZigBee, WiFi and BACnet. Findings suggest that energy metering is covered in existing policies and regulations in only a handful of countries. Most of the legislations and policies on energy metering in Europe are in response to the Energy Performance of Buildings Directive (EPBD), 2002/91/EC. However, recent developments in policy are pointing towards more stringent metering requirements in future, moving away from voluntary to mandatory compliance. With regards to metering equipment, significant developments have been made in the recent past on miniaturisation, accuracy, robustness, data storage, ability to connect using multiple communication protocols, and the integration with BEMS and the Cloud – resulting in a range of available solutions, selection of which can be challenging. Developments in communication technologies, in particular in low-power wireless such as ZigBee and Bluetooth LE (BLE), are enabling cost-effective machine to machine (M2M) and internet of things (IoT) implementation of sensor networks. Privacy and data protection, however, remain a concern for data aggregators and end-users. The standardization of network protocols and device functionalities remains an active area of research and development, especially due to the prevalence of many protocols in the BEMS industry. Available solutions often lack interoperability between hardware and software systems, resulting in vendor lock-in. The paper provides a comprehensive understanding of available technologies for energy metering and environmental monitoring; their drivers, advantages and limitations; factors affecting their selection and future directions of research and development – for use a reference, as well as for generating further interest in this expanding research area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal comfort: Analysis and applications in environmental engineering
(1972) · Applied Ergonomics · doi:10.1016/s0003-6870(72)80074-7 · Cited by 4,451
Demand side management: benefits and challenges
Strbac, G. (2008) · Energy Policy · doi:10.1016/j.enpol.2008.09.030 · Cited by 1,702
A Survey on Smart Grid Communication Infrastructures: Motivations, Requirements and Challenges
Yan, Y., Qian, Y., Sharif, H., & Tipper, D. (2013) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2012.021312.00034 · Cited by 1,315
Cyber–Physical Security of a Smart Grid Infrastructure
Mo, Y., Kim, T. H.-J., Brancik, K., Dickinson, D., Lee, H., Perrig, A., & Sinopoli, B. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2161428 · Cited by 1,096
(2004) · Springer eBooks · doi:10.1007/b97321 · Cited by 1,028
Review of temperature measurement
Childs, P., Greenwood, J. R., & Long, C. A. (2000) · Review of Scientific Instruments · doi:10.1063/1.1305516 · Cited by 980
Awbi, H. B. (2002) · Routledge eBooks · doi:10.4324/9780203476307 · Cited by 900
Shaikh, P. H., Nor, N. B. M., Nallagownden, P., Elamvazuthi, I., & Ibrahim, T. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.027 · Cited by 866
Ceramic sensors for humidity detection: the state-of-the-art and future developments
Traversa, E. (1995) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(94)01268-m · Cited by 848
Bank, W. (2015) · The World Bank Group A to Z 2016 · doi:10.1596/978-1-4648-0484-7_world_development_indicators · Cited by 761
Smart home energy management system using IEEE 802.15.4 and zigbee
Han, D.-M., & Lim, J.-H. (2010) · IEEE Transactions on Consumer Electronics · doi:10.1109/tce.2010.5606276 · Cited by 663
DIRECTIVE (EU) 2017/1371 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
Herrnfeld, H.-H., Brodowski, D., & Burchard, C. (2021) · European Public Prosecutor's Office · doi:10.5771/9783845290768-771 · Cited by 655
A survey on Advanced Metering Infrastructure
Rashed Mohassel, R., Fung, A., Mohammadi, F., & Raahemifar, K. (2014) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2014.06.025 · Cited by 632
Design and implementation of smart home energy management systems based on zigbee
Han, D.-M., & Lim, J.-H. (2010) · IEEE Transactions on Consumer Electronics · doi:10.1109/tce.2010.5606278 · Cited by 568
Smart meters for power grid: Challenges, issues, advantages and status
Depuru, S. S. S. R., Wang, L., & Devabhaktuni, V. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.039 · Cited by 567
(2005) · Elsevier eBooks · doi:10.1016/b978-0-7506-7729-5.x5040-x · Cited by 498
Building operation and energy performance: Monitoring, analysis and optimisation toolkit
Costa, A., Keane, M. M., Torrens, J. I., & Corry, E. (2013) · Applied Energy · doi:10.1016/j.apenergy.2011.10.037 · Cited by 394
Importance of occupancy information for building climate control
Oldewurtel, F., Sturzenegger, D., & Morari, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.06.014 · Cited by 382
Zakrzewska, K. (2001) · Thin Solid Films · doi:10.1016/s0040-6090(01)00987-7 · Cited by 355
End-to-End Communication Architecture for Smart Grids
Sauter, T., & Lobashov, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2070771 · Cited by 343
Balaji, B., Xu, J., Nwokafor, A., Gupta, R., & Agarwal, Y. (2013) · Proceedings of the 11th ACM Conference on Embedded Networked Sensor Systems · doi:10.1145/2517351.2517370 · Cited by 318
Design and implementation of home automation system
Alheraish, A. (2004) · IEEE Transactions on Consumer Electronics · doi:10.1109/tce.2004.1362503 · Cited by 314
Evolution of Communication Technologies for Smart Grid applications
Usman, A., & Shami, S. H. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.002 · Cited by 296
Cyber security issues for Advanced Metering Infrasttructure (AMI)
Cleveland, F. M. (2008) · 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century · doi:10.1109/pes.2008.4596535 · Cited by 289
Developing a communication infrastructure for the Smart Grid
Sood, V. K., Fischer, D., Eklund, J., & Brown, T. (2009) · IEEE Electrical Power and Energy Conference (EPEC) · doi:10.1109/epec.2009.5420809 · Cited by 266
The performance of occupancy-based lighting control systems: A review
Guo, X., Tiller, D., Henze, G. P., et al. (2010) · Lighting Research & Technology · doi:10.1177/1477153510376225 · Cited by 243
Computational intelligence techniques for HVAC systems: A review
Ahmad, M. W., Mourshed, M., Yuce, B., & Rezgui, Y. (2016) · Building Simulation · doi:10.1007/s12273-016-0285-4 · Cited by 232
Self-citationHaq, M. A. U., Hassan, M. Y., Abdullah, H., Rahman, H. A., Abdullah, M. P., Hussin, F., & Said, D. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.01.090 · Cited by 229
ENERNET: Studying the dynamic relationship between building occupancy and energy consumption
Martani, C., Lee, D., Robinson, P., Britter, R. E., & Ratti, C. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.12.037 · Cited by 213
A Survey of Communication Protocols for Automatic Meter Reading Applications
Khalifa, T., Naik, K., & Nayak, A. (2011) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2011.041110.00058 · Cited by 206
Batista, N. C., Melício, R., Matias, J. C. O., & Catalão, J. P. S. (2013) · Energy · doi:10.1016/j.energy.2012.11.002 · Cited by 194
An analysis of energy-efficient light fittings and lighting controls
Li, D. H. W., Cheung, K. L., Wong, S. L., & Lam, T. N. T. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.07.002 · Cited by 164
Control of CO2 in a naturally ventilated classroom
Griffiths, M., & Eftekhari, M. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.04.013 · Cited by 159 · cited 1×
“CO2 sensor information can be directly used in building automation to increase the natural or mechanical airflow, but many studies have also suggested to use visual traffic-light-type sensors to inform the occupants of the increasing CO2 concentration in a room [70].”
Background2008 IEEE International Conference on Automation and Logistics
(2008) · doi:10.1109/ical14380.2008 · Cited by 158
Industrial power and energy metering – a state-of-the-art review
O’Driscoll, E., & O’Donnell, G. E. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.09.046 · Cited by 128
Alfano, F. R. D., Dell’Isola, M., Palella, B. I., Riccio, G., & Russi, A. (2013) · Building and Environment · doi:10.1016/j.buildenv.2013.01.026 · Cited by 125
Mumbai, I. U. S. C. (2013) · Cited by 119
Ergonomics of the Thermal Environment
Kwon, J. (2011) · 대한인간공학회 학술대회논문집 · Cited by 113
Pathways of smart metering development: shaping environmental innovation
Marvin, S., Chappells, H., & Guy, S. C. (1999) · Computers Environment and Urban Systems · doi:10.1016/s0198-9715(99)00011-3 · Cited by 90
Opportunities of Wireless Sensors and Controls for Building Operation
Kintner-Meyer, M. C. (2005) · Energy Engineering · doi:10.1080/01998590509509441 · Cited by 78
Energy Efficiency Office. Building Technologies Office USDOE Office of Energy Efficiency and Renewable Energy (EERE), Brambley, M., Haves, P., McDonald, S., Torcellini, P., Hansen, D., Holmberg, D., & Roth, K. (2005) · doi:10.2172/1217909 · Cited by 73
Application and analysis of ZigBee technology for Smart Grid
Zhang, Q., Sun, Y., & Cui, Z. (2010) · doi:10.1109/iccia.2010.6141563 · Cited by 64
An opportunistic activity-sensing approach to save energy in office buildings
Milenkovic, M., & Amft, O. (2013) · ACM International Conference on Future Energy Systems (e-Energy) · doi:10.1145/2487166.2487194 · Cited by 60
Towards embedded wireless-networked intelligent daylighting systems for commercial buildings
Wen, Y.-J., Granderson, J., & Agogino, A. M. (2006) · doi:10.1109/sutc.2006.136 · Cited by 58
The potential effect of end‐users on energy conservation in office buildings
Junnila, S. (2007) · Facilities · doi:10.1108/02632770710753352 · Cited by 38
Low carbon Buildings: Sensitivity of Thermal Properties of Opaque Envelope Construction and Glazing
Dowd, R. M., & Mourshed, M. M. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.07.189 · Cited by 25
Self-citation2004 Rural Electric Power Conference
(2004) · doi:10.1109/repcon.2004.1307022 · Cited by 14
Instrumentation systems for commercial building energy efficiency
Fugate, D. L., Fuhr, P. L., & Kuruganti, T. P. (2011) · doi:10.1109/fiiw.2011.6476826 · Cited by 11
Interoperability-based Optimisation of Architectural Design
Mourshed, M. M. (2006) · Loughborough University Institutional Repository (Loughborough University) · doi:10.13140/rg.2.1.2764.1845 · Cited by 10
Self-citationCorporate Social Responsibility
Grinstein, A., & Blekher, M. (2015) · Wiley Encyclopedia of Management · doi:10.1002/9781118785317.weom090058 · Cited by 10
Cited by
A review on buildings energy information: Trends, end-uses, fuels and drivers
González-Torres, M., Pérez-Lombard, L., Coronel, J. F., Maestre, I. R., & Yan, D. (2022) · Energy Reports · doi:10.1016/j.egyr.2021.11.280 · Cited by 1,036
Ahmad, M. W., Mourshed, M., & Rezgui, Y. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.04.038 · Cited by 1,013
Self-citationA review of machine learning in building load prediction
Zhang, L., Wen, J., Li, Y., Chen, J., Ye, Y., Fu, Y., & Livingood, W. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116452 · Cited by 671
Ahmad, M. W., Reynolds, J., & Rezgui, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.207 · Cited by 642
Self-citationIEA EBC Annex 66: Definition and simulation of occupant behavior in buildings
Yan, D., Hong, T., Dong, B., Mahdavi, A., D’Oca, S., Gaetani, I., & Feng, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.084 · Cited by 508
Metadata
- Authors
- Ahmad, M. W., Mourshed, M., Mundow, D., Sisinni, M., & Rezgui, Y.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2016-05
- Volume
- 120
- Pages
- 85-102
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W2307825619
- Cited by
- 348
- References
- 56
- FWCI
- 46.52
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.