Life cycle performance of Cross Laminated Timber mid-rise residential buildings in Australia
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Engineering wood products have significant potential as a sustainable alternative for concrete and steel in construction. Cross Laminated Timber (CLT) can add value to conventional timber products due to its high strength-to-weight ratio, simple installation, aesthetic features and environmental benefits. Recent changes in the national construction code permit structural timber buildings with a height of up to 25m, which demonstrates the strong commitment of the construction industry to adopt more sustainable practices. This paper aims to compare life cycle greenhouse gas emissions (LCGHGE) and life cycle cost (LCC) of CLT and reinforced concrete (RC) in identical midrise residential buildings in three most populated cities in Australia. It has shown that the CLT building has 30 % less LCGHGE compared with the RC building over a life span of 50 years in Melbourne, and 34% and 29% reduction in LCGHCE in Sydney and Brisbane, respectively. The results from LCC analysis showed that CLT building is 1.3% lower than conventional RC in Melbourne, and 0.9% lower in Sydney and Brisbane. The initial and end of life phases reflected reductions in LCGHGE and LCC for the CLT building whilst the operation phase incurred higher values. The extended service life of buildings has a major impact on the operational phase while changes in the discount rate have strong effects on the lifecycle operational and maintenance costs. Overall the CLT building outperformed the RC building in terms of LCGHGE and LCC across three cities. However, further savings in the operational phase with energy efficient methodologies and reuse or recycling of timber products at the end of life of the building can reinforce CLT as a sustainable alternative to RC construction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chastas, P., Theodosiou, T., & Bikas, D. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.040 · Cited by 400
Carbon implications of end-of-life management of building materials
Dodoo, A., Gustavsson, L., & Sathre, R. (2009) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2008.12.007 · Cited by 181
Cited by
Cross-laminated timber for building construction: a life-cycle-assessment overview
Younis, A., & Dodoo, A. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104482 · Cited by 175
Dodoo, A., Nguyen, T., Dorn, M., Olsson, A., & Bader, T. K. (2022) · Wood Material Science & Engineering · doi:10.1080/17480272.2021.1974937 · Cited by 46
Dynamic accounting of carbon uptake in the built environment
Van Roijen, E., Kane, S., Fan, J., Olsson, J. A., Bose, B., Hendrickson, T. P., Nordahl, S. L., Kendall, A., Scown, C. D., & Miller, S. A. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c00080 · Cited by 14
The Preferability Framework - Enabling life cycle sustainability assessment meta studies
Huber, J., & Fröhling, M. (2024) · Sustainable Production and Consumption · doi:10.1016/j.spc.2024.02.021 · Cited by 3
Metadata
- Authors
- Jayalath, A., Navaratnam, S., Ngo, T., Mendis, P., Hewson, N., & Aye, L.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 223
- Pages
- 110091
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W3024163988
- Cited by
- 112
- References
- 2
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Life cycle performance of Cross Laminated Timber mid-rise residential buildings in Australia. https://app.cochat.ai/papers/10.1016/j.enbuild.2020.110091
- The paper
- Jayalath, A., Navaratnam, S., Ngo, T., Mendis, P., Hewson, N., & Aye, L. (2020). Life cycle performance of Cross Laminated Timber mid-rise residential buildings in Australia. Energy and Buildings. https://doi.org/10.1016/j.enbuild.2020.110091
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.