The DOI matches its Crossref record.
A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends
Open accessAbstract
An experimental investigation was carried out to assess the effects of using plastic oil in a DI diesel engine. Plastic oil was synthesized from plastic waste, collected from municipal landfill areas, by pyrolysis process. PO25 (25% plastic oil and 75% diesel in volume), PO 50 and PO75 blends were prepared using plastic oil and the reference diesel fuel. In this present work the combustion characteristics of a constant speed diesel engine were studied under variable loading conditions. The results indicate that the thermal efficiency of all blends and neat plastic oil is lower than diesel at all loading conditions. At full load, the peak cylinder pressure, heat release, combustion duration and ignition delay of plastic oil and its blends were higher than that of diesel. The peak pressure of the engine running on neat plastic oil was increased by about 6% but it showed poor thermal efficiency. Based on test results it can be noticed that the combustion characteristics are greatly affected by the physical properties of the fuel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil
Kalargaris, I., Tian, G., & Gu, S. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.11.016 · Cited by 338
Mangesh, V. L., Padmanabhan, S., Tamizhdurai, P., & Ramesh, A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119066 · Cited by 281
Non-biodegradable polymeric waste pyrolysis for energy recovery
Dwivedi, P., Mishra, P. K., Mondal, M. K., & Srivastava, N. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02198 · Cited by 146
Optimisation of Process Parameters to Maximise the Oil Yield from Pyrolysis of Mixed Waste Plastics
Faisal, F., Rasul, M. G., Chowdhury, A. A., & Jahirul, M. I. (2024) · Sustainability · doi:10.3390/su16072619 · Cited by 30
Metadata
- Authors
- Kaimal, V. K., & Vijayabalan, P.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2015-11
- Volume
- 105
- Pages
- 951-956
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W1246829686
- Cited by
- 201
- References
- 0
- FWCI
- 11.99
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends. https://app.cochat.ai/papers/10.1016/j.enconman.2015.08.043
- The paper
- Kaimal, V. K., & Vijayabalan, P. (2015). A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2015.08.043
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.