The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effect of Al 2 O 3 nanoparticle dispersion on the specific heat capacity of a eutectic binary nitrate salt for solar power applications
Abstract
Abstract Molten salts can be used as heat transfer fluids or thermal storage materials in a concentrated solar power plant. Improving the thermal properties can influence the utilization efficiency of solar energy. In this study, the effect of doping eutectic binary salt solvent with Al2O3 nanoparticles on its specific heat capacity (cp) was investigated. The effects of the mass fraction of nanoparticles on the cp of the composite nanofluid were analyzed, using both differential scanning calorimetry measurements and molecular dynamics simulations. The specific heat capacity of the nanocomposites was enhanced by increasing the nanoparticle concentration. The maximum enhancement was found to be 8.3%, at a nanoparticle concentration of 2.0%. A scanning electron microscope was used to analyze the material morphology. It was observed that special nanostructures were formed and the specific heat capacity of the nanocomposites was enhanced by increasing the quantity of nanostructures. Simulation results of cp agreed well with the experimental data, and the potential energy and interaction energy in the system were analyzed. The change in Coulombic energy contributed to most of the large change in cp, which explains the discrepancy in values between conventional nanofluids and molten salt-based nanofluids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.051 · Cited by 242
Self-citationFrosting characteristics on hydrophobic and superhydrophobic surfaces: A review
Kim, M.-H., Kim, H., Lee, K.-S., & Kim, D. R. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.067 · Cited by 171
Kim, M.-H., Kim, H., Kim, D. R., & Lee, K.-S. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.11.028 · Cited by 68
Cited by
Shah, T. R., & Ali, H. M. (2019) · Solar Energy · doi:10.1016/j.solener.2019.03.012 · Cited by 366
A review of solar hybrid photovoltaic-thermal (PV-T) collectors and systems
Herrando, M., Wang, K., Huang, G., Otanicar, T., Mousa, O. B., Agathokleous, R. A., Ding, Y., Kalogirou, S., Ekins-Daukes, N., Taylor, R. A., et al. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101072 · Cited by 321
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Han, D., Guene Lougou, B., Xu, Y., Shuai, Y., & Huang, X. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114674 · Cited by 155
Saranprabhu, M. K., & Rajan, K. S. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.04.027 · Cited by 89
Metadata
- Authors
- Hu, Y., He, Y., Zhang, Z., & Wen, D.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2017-06
- Volume
- 142
- Pages
- 366-373
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2599635117
- Cited by
- 184
- References
- 3
- FWCI
- 12.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.