The DOI matches its Crossref record.
Hybrid vibration and wind energy harvesting using combined piezoelectric and electromagnetic conversion for bridge health monitoring applications
Abstract
In this paper a novel multimodal hybrid bridge energy harvester (HBEH) using combined piezoelectric and electromagnetic conversion is reported. The architecture, fabrication, and characterization of the harvester is discussed. The devised HBEH consists of a permanent magnet, a wound coil, a piezoelectric plate, an airfoil, and two cantilever beams attached to a base support frame. The upper cantilever is holding a permanent magnet and an airfoil as tip mass. A piezoelectric plate is bonded on this beam near its fixed end. On the other hand, the lower beam holds a wound coil. The coil is adjusted in such a way that it is in-line and close to the permanent magnet. The harvester is capable of converting bridge vibrations and ambient wind energy into useful electrical energy to operate wireless sensor nodes (WSNs) for the health monitoring of bridges. Experimentally, the HBEH operated at three, low frequency resonant modes, ranging from 11 to 45 Hz, concentrated around 11, 38 and 43 Hz. Moreover, under sinusoidal base acceleration of 0.6 g, the harvester produced a maximum power of 2214.32 µW across a matching impedance of 28 Ω from its electromagnetic portion at 1st resonance (11.1 Hz). However, a peak power of 155.7 µW was generated by the harvester from its piezoelectric part under 0.4 g base excitation across 130 kΩ load resistance. Furthermore, at 6 m/s pulsating wind speed, the harvester generated load voltages of 25 mV and 114 mV from its electromagnetic and piezoelectric portions when connected to optimum load impedance of 28 Ω and 130 kΩ respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Liu, H., Fu, H., Sun, L., Lee, C., & Yeatman, E. M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110473 · Cited by 405
Mechanical modulations for enhancing energy harvesting: Principles, methods and applications
Zou, H.-X., Zhao, L.-C., Gao, Q.-H., Zuo, L., Liu, F.-R., Tan, T., Wei, K.-X., & Zhang, W.-M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113871 · Cited by 377
A review of flow-induced vibration energy harvesters
Ma, X., & Zhou, S. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115223 · Cited by 263
Tang, X., Wang, X., Cattley, R., Gu, F., & Ball, A. D. (2018) · Sensors · doi:10.3390/s18124113 · Cited by 261
Sivasuriyan, A., Vijayan, D. S., LeemaRose, A., Revathy, J., Gayathri Monicka, S., Adithya, U. R., & Jebasingh Daniel, J. (2021) · Advances in Materials Science and Engineering · doi:10.1155/2021/2615029 · Cited by 29
Retracted
Metadata
- Authors
- Iqbal, M., & Khan, F. U.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 172
- Pages
- 611-618
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2883872975
- Cited by
- 237
- References
- 0
- FWCI
- 14.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid vibration and wind energy harvesting using combined piezoelectric and electromagnetic conversion for bridge health monitoring applications. https://app.cochat.ai/papers/10.1016/j.enconman.2018.07.044
- The paper
- Iqbal, M., & Khan, F. U. (2018). Hybrid vibration and wind energy harvesting using combined piezoelectric and electromagnetic conversion for bridge health monitoring applications. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2018.07.044
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.