The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Experimental investigation of multiwall carbon nanotube/paraffin based heat sink for electronic device thermal management
Abstract
This paper presents experimental investigation for the effects of a phase change material (PCM) and a nano/phase change material (nano-PCM) on the thermal performance of an electronic chipset. A thermal storage system using Paraffin wax as a PCM is integrated with a heat sink. Additionally, the PCM is modified as nano-PCM by mixing it with multiwall carbon nanotubes (MWCNTs). The effects of various quantities of the PCM, concentrations of the MWCNTs in the PCM, and different power levels on three different modules of heat sinks (without PCM, filled with PCM, and filled with nano-PCM) are studied in passive and active operating modes. Experiments are also performed when the heat flux is applied intermittently, which commonly encountered in the thermal management of portable electronic devices. The phase front propagation is captured and analyzed by an image processing technique. It is found that the PCM can significantly increase the usage time of the system and the nano-PCM as compared to the PCM can extend this time under passive cooling condition. Under active cooling condition, the usage of PCM and nano-PCM may increase the steady-state temperature; however, it reduces the operating temperature of the chipset at the beginning period of the operating time. The nano-PCM module can enhance thermal management of the system by reducing the cooling time up to 6% as compared to the PCM. Under intermittent heating, using more on-and-off cycles lead to decreasing the chipset peak temperature. Using PCM and nano-PCM increases the operating time and reduces the peak temperature of the chipset under intermittent use.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on applications and challenges of nanofluids
Saidur, R., Leong, K. Y., & Mohammed, H. A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.035 · Cited by 1,959
Review of convective heat transfer enhancement with nanofluids
Kakaç, S., & Pramuanjaroenkij, A. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.02.006 · Cited by 1,946
Sardarabadi, M., Passandideh-Fard, M., & Zeinali Heris, S. (2014) · Energy · doi:10.1016/j.energy.2014.01.102 · Cited by 508
Self-citationTransient cooling of electronics using phase change material (PCM)-based heat sinks
Kandasamy, R., Wang, X.-Q., & Mujumdar, A. S. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.06.010 · Cited by 506
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Pandey, A. K., Hossain, M. S., Tyagi, V. V., Abd Rahim, N., Selvaraj, J. A. /., & Sari, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.043 · Cited by 423
A nano-graphite/paraffin phase change material with high thermal conductivity
Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421
Ho, C. J., & Gao, J. Y. (2009) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2009.01.015 · Cited by 393
Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks
Fok, S. C., Shen, W., & Tan, F. L. (2009) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2009.06.011 · Cited by 329
Mahmoud, S. M., Tang, A., Toh, C. K., Al-Dadah, R., & Soo, S. L. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.059 · Cited by 299
Preparation and thermal characteristics of CuO–oleic acid nanofluids as a phase change material
Harikrishnan, S., & Kalaiselvam, S. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.01.018 · Cited by 209
Wu, W., Zhang, G., Ke, X., Yang, X., Wang, Z., & Liu, C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.05.050 · Cited by 199
Thermal energy storage performance of paraffin in a novel tube-in-shell system
Akgün, M., Aydın, O., & Kaygusuz, K. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.05.013 · Cited by 184
Study of a PCM based energy storage system containing Ag nanoparticles
Zeng, J. L., Sun, L. X., Xu, F., Tan, Z. C., Zhang, Z. H., Zhang, J., & Zhang, T. (2007) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-006-7783-z · Cited by 180
Passive thermal management using metal foam saturated with phase change material in a heat sink
Qu, Z. G., Li, W. Q., Wang, J. L., & Tao, W. Q. (2012) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2012.09.001 · Cited by 178
Thermal management of electronic devices using carbon foam and PCM/nano-composite
Alshaer, W. G., Nada, S. A., Rady, M. A., Del Barrio, E. P., & Sommier, A. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.10.012 · Cited by 161
Thermal performance of a PCM heat sink under different heat loads: An experimental study
Baby, R., & Balaji, C. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.12.018 · Cited by 148
Yang, X., Tan, S., He, Z., & Liu, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.01.056 · Cited by 135
Experimental research on heat transfer mechanism of heat sink with composite phase change materials
Yin, H., Gao, X., Ding, J., & Zhang, Z. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.10.022 · Cited by 129
Wang, H., Wang, F., Li, Z., et al. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.050 · Cited by 129
Convection effect on the melting process of nano-PCM inside porous enclosure
Tasnim, S. H., Hossain, R., Mahmud, S., & Dutta, A. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.01.073 · Cited by 126
Alimohammadi, M., Aghli, Y., Alavi, E. S., Sardarabadi, M., & Passandideh‐Fard, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.028 · Cited by 124
Self-citationMulti-objective geometric optimization of a PCM based matrix type composite heat sink
Srikanth, R., Nemani, V. P., & Balaji, C. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.07.046 · Cited by 96
Transient performance of a PCM-based heat sink with high aspect-ratio carbon nanofillers
Fan, L., Zhu, Z.-Q., Zeng, Y. D., Xiao, Y., Liu, X., Wu, Y., Ding, Q. W., Yu, Z., & Cen, K. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.050 · Cited by 94
Kardam, A., Narayanan, S. S., Bhardwaj, N., Madhwal, D., Shukla, P., Verma, A., & Jain, V. K. (2015) · RSC Advances · doi:10.1039/c5ra06869j · Cited by 48
Cited by
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
A review of the state-of-the-art in electronic cooling
Zhang, Z., Wang, X., & Yan, Y. (2021) · e-Prime - Advances in Electrical Engineering, Electronics and Energy · doi:10.1016/j.prime.2021.100009 · Cited by 310
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Metadata
- Authors
- Farzanehnia, A., Khatibi, M., Sardarabadi, M., & Passandideh-Fard, M.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 179
- Pages
- 314-325
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2898914006
- Cited by
- 288
- References
- 25
- FWCI
- 13.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.