The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
An innovative battery thermal management with thermally induced flexible phase change material
Abstract
Abstract Traditional battery thermal management (BTM) with phase change material (PCM) is constrained by the problems of leakage, low thermal conductivity and high rigidity of PCM from the assembly perspective. Herein, we report an innovative and facile BTM with thermally induced flexible composite PCM (FCPCM). In this design, battery could be clinched to the FCPCM with an interference fit because of the thermally induced flexibility and shape recovery of FCPCM. Such an assembly is designed to be compact and efficient with no need for thermal grease. The steady-state measurement results show that different phase states of PCM have different thermal interface properties. The integration associated with the shape recovery of FCPCM could cause a low thermal contact resistance between battery and FCPCM. As a result, the constructed passive BTM exhibits an excellent thermal control performance. When the battery is discharged from 100% to 0% charge state, the maximum temperature of FCPCM based BTM is 43.4 °C during 2.5C discharge rate, which is 28.8 °C lower than No PCM. For the conditions of dynamic stress test and charge–discharge cycle, it shows lower temperature fluctuation within the acceptable range and the long-time function of latent heat of PCM could be recovered. With these prominent performances, the BTM performed here with respect to assembly methods and process flexibility will provide insights into the passive BTM system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Zhang, X., Liu, C., & Rao, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.076 · Cited by 153
Self-citationWu, W., Wu, W., Qiu, X., & Wang, S. (2019) · International Journal of Energy Research · doi:10.1002/er.4257 · Cited by 108
Self-citation
Cited by
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
Self-citationA review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM
Murali, G., Sravya, G. S. N., Jaya, J., & Naga Vamsi, V. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111513 · Cited by 325
Flexible phase change materials for thermal energy storage
Shi, J., Qin, M., Aftab, W., & Zou, R. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.048 · Cited by 309
Weng, J., Huang, Q., Li, X., Zhang, G., Ouyang, D., Chen, M., Yuen, A. C. Y., Li, A., Lee, E. W. M., Yang, W., et al. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.09.007 · Cited by 297
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Metadata
- Authors
- Wu, W., Liu, J., Liu, M., Rao, Z., Deng, H., Wang, Q., Qi, X., & Wang, S.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 221
- Pages
- 113145
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W3039615733
- Cited by
- 238
- References
- 5
- FWCI
- 12.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An innovative battery thermal management with thermally induced flexible phase change material. https://app.cochat.ai/papers/10.1016/j.enconman.2020.113145
- The paper
- Wu, W., Liu, J., Liu, M., Rao, Z., Deng, H., Wang, Q., Qi, X., & Wang, S. (2020). An innovative battery thermal management with thermally induced flexible phase change material. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2020.113145
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.