The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal and electrochemical performance assessment of a high temperature PEM electrolyzer
Open accessAbstract
In this paper, detailed effects of operating conditions and design parameters including temperature, pressure, gas diffusion layer (GDL) thickness, membrane thickness and GDL porosity on the performance of a high temperature proton exchange membrane electrolyzer cell (PEMEC) are studied. A CFD analysis is carried out using a finite volume method based on a fully three-dimensional model. The model is verified against experimental data and the realistic effects of varying operating conditions are considered. The results indicate that decrease of operating temperature from 403 K to 373 K results in reduction of hydrogen concentration at the membrane-catalyst interface from 2.2 × 10−4 to 1.9 × 10−4 mol/m3. The temperature and hydrogen concentration under rib area of channel are relatively higher due to the accumulation of water under this area that leads to higher electrochemical rate. An increase of GDL thickness from 0.2 mm to 0.5 mm at a voltage of 1.65 V leads to reduction of current density from 0.426 A/cm2 to 0.409 A/cm2. The porosity of the GDL has no significant effect on the polarization curve. The current density of the PEMEC for a membrane thickness of 50 μ m at voltage of 1.6 V is 48% higher than a membrane thickness of 200 μm .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Computational fluid dynamics modeling of proton exchange membrane fuel cells
Um, S., Wang, C. Y., & Chen, K. S. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1394090 · Cited by 756
Cited by
Water Electrolysis toward Elevated Temperature: Advances, Challenges and Frontiers
Zhang, W., Liu, M., Gu, X., Shi, Y., Deng, Z., & Cai, N. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00573 · Cited by 441
Apostolou, D., & Xydis, G. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109292 · Cited by 403
Mehrenjani, J. R., Gharehghani, A., & Sangesaraki, A. G. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115266 · Cited by 154
Metadata
- Authors
- Toghyani, S., Afshari, E., Baniasadi, E., Atyabi, S. A., & Naterer, G. F.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 152
- Pages
- 237-246
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2794891225
- Cited by
- 173
- References
- 1
- FWCI
- 2.73
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal and electrochemical performance assessment of a high temperature PEM electrolyzer. https://app.cochat.ai/papers/10.1016/j.energy.2018.03.140
- The paper
- Toghyani, S., Afshari, E., Baniasadi, E., Atyabi, S. A., & Naterer, G. F. (2018). Thermal and electrochemical performance assessment of a high temperature PEM electrolyzer. Energy. https://doi.org/10.1016/j.energy.2018.03.140
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.