The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials
Abstract
For solving the global problems of environmental pollution and energy shortages, thermal energy storage system that can improve the efficiency and utilization ratio of energy and solve the gap between energy demand and supply, has received more attention in recent years. More specifically, the latent thermal storage systems that use phase change materials (PCMs) as storage media, possessing high latent heat storage density and almost constant phase change temperature are the focus area in thermal energy storage. Previously, most of the researches on PCMs were organic, however in recent years, inorganic PCMs with large phase change temperature range have been paid more and more attention. In common inorganic PCMs, hydrated salts possess lower phase change temperature, applying in buildings, solar water heating systems, textiles, etc., and molten salts and metals have higher phase change temperature, applying in concentrated solar power (CSP) generation and industrial waste heat recovery etc. Each has its own outstanding merits, for example, inorganic salts possess a large latent heat storage capacity and metals possess an extremely high thermal conductivity. Therefore, this review focuses on the researches of inorganic PCMs in recent years and summaries their thermal properties, and introduces the integration of inorganic PCMs into heat exchangers and some applications of inorganic PCMs in main systems, seeking to give readers a relatively comprehensive awareness on them.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
High-temperature phase change materials for thermal energy storage
Kenisarin, M. M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.011 · Cited by 1,192
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Development of phase change materials based microencapsulated technology for buildings: A review
Tyagi, V. V., Kaushik, S. C., Tyagi, S. K., & Akiyama, T. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.10.006 · Cited by 779
Thermal energy storage systems for concentrated solar power plants
Pelay, U., Luo, L., Fan, Y., Stitou, D., & Rood, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.139 · Cited by 768
Mohamed, S. A., Al-Sulaiman, F. A., Ibrahim, N. I., Zahir, M. H., Al-Ahmed, A., Saidur, R., Yılbaş, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.012 · Cited by 759
Xu, B., Li, P., & Chan, C. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.09.016 · Cited by 666
Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review
Miró, L., Gasia, J., & Cabeza, L. F. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.147 · Cited by 640
Brückner, S., Liu, S., Miró, L., Radspieler, M., Cabeza, L. F., & Lävemann, E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.147 · Cited by 597
A review on supercooling of Phase Change Materials in thermal energy storage systems
Safari, A., Saidur, R., Sulaiman, F. A., Xu, Y., & Dong, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.272 · Cited by 594
Kalnæs, S. E., & Jelle, B. P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.02.023 · Cited by 585
Karaipekli, A., Biçer, A., Sarı, A., & Tyagi, V. V. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.053 · Cited by 582
Pinel, P., Cruickshank, C. A., Beausoleil-Morrison, I., & Wills, A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.04.013 · Cited by 536
Cárdenas, B., & León, N. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.028 · Cited by 496
IEA EBC Annex 67 Energy Flexible Buildings
Jensen, S. Ø., Marszal-Pomianowska, A., Lollini, R., Pasut, W., Knotzer, A., Engelmann, P., Stafford, A., & Reynders, G. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.044 · Cited by 490
Review on building energy performance improvement using phase change materials
Song, M., Niu, F., Mao, N., Hu, Y., & Deng, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.066 · Cited by 418
Thermal performance of copper foam/paraffin composite phase change material
Zheng, H., Wang, C., Liu, Q., Tian, Z., & Fan, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.12.023 · Cited by 404
Salt hydrates as latent heat storage materials:Thermophysical properties and costs
Kenisarin, M., & Mahkamov, K. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.10.029 · Cited by 396
Amin, M., Putra, N., Kosasih, E. A., Prawiro, E., Luanto, R. A., & Mahlia, T. M. I. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.085 · Cited by 370
Chandel, S. S., & Agarwal, T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.070 · Cited by 359
Deng, Y., Li, J., Qian, T., Guan, W., Li, Y., & Yin, X. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.068 · Cited by 351
Review of the application of phase change material for heating and domestic hot water systems
Sharif, M. K. A., Al-Abidi, A. A., Mat, S., Sopian, K., Ruslan, M. H., Sulaiman, M. Y., & Rosli, M. A. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.034 · Cited by 312
Thermal energy storage using chloride salts and their eutectics
Myers, P. D., & Goswami, D. Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.046 · Cited by 297
Tiari, S., Qiu, S., & Mahdavi, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.053 · Cited by 296
Huang, X., Alva, G., Jia, Y., & Fang, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.048 · Cited by 278
Self-citationExperimentation with a water tank including a PCM module
Cabeza, L. F., Ibáñez, M., Solé, C., Roca, J., & Nogués, M. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.08.002 · Cited by 272
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.051 · Cited by 242
Pacio, J., & Wetzel, T. (2013) · Solar Energy · doi:10.1016/j.solener.2013.03.025 · Cited by 242
Finck, C., Li, R., Kramer, R., & Zeiler, W. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.11.036 · Cited by 239
Li, T. X., Wu, D. L., He, F., & Wang, R. Z. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.056 · Cited by 225
Meng, Z. N., & Zhang, P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.163 · Cited by 214
Canbazoğlu, S., Şahinaslan, A., Ekmekyapar, A., et al. (2004) · Energy and Buildings · doi:10.1016/j.enbuild.2004.06.016 · Cited by 207
Benli, H., & Durmuş, A. (2009) · Solar Energy · doi:10.1016/j.solener.2009.07.005 · Cited by 205
Nomura, T., Sheng, N., Zhu, C., Saito, G., Hanzaki, D., Hiraki, T., & Akiyama, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.025 · Cited by 205
Solar domestic hot water systems using latent heat energy storage medium: A review
Seddegh, S., Wang, X., Henderson, A. D., & Xing, Z. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.147 · Cited by 203
Qian, T., Li, J., Min, X., Deng, Y., Guan, W., & Ning, L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.071 · Cited by 201
Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer
Myers, P. D., Alam, T. E., Kamal, R., Goswami, D. Y., & Stefanakos, E. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.045 · Cited by 192
Zhao, W., France, D. M., Yu, W., Kim, T., & Singh, D. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.03.031 · Cited by 182
Huang, Z., Gao, X., Xu, T., Fang, Y., & Zhang, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.11.019 · Cited by 178
Mohamed, N. H., Soliman, F. S., El Maghraby, H., & Moustfa, Y. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.009 · Cited by 177
Gasia, J., Miró, L., & Cabeza, L. F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.119 · Cited by 170
Zhong, L., Zhang, X., Luan, Y., Wang, G., Feng, Y., & Feng, D. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.019 · Cited by 168
Encapsulation of copper-based phase change materials for high temperature thermal energy storage
Zhang, G., Li, J., Chen, Y., Xiang, H., Ma, B., Xu, Z., & Ma, X. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.05.012 · Cited by 166
Acem, Z., Lopez, J., & del Barrio, E. P. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.03.013 · Cited by 163
Fernández, A. I., Barreneche, C., Belusko, M., Segarra, M., Bruno, F., & Cabeza, L. F. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.06.054 · Cited by 162
Liu, Y., & Yang, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.146 · Cited by 158
Tian, H., Du, L., Wei, X., Deng, S., Wang, W., & Ding, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.027 · Cited by 151
Tiari, S., Qiu, S., & Mahdavi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.025 · Cited by 150
Application of phase change materials in gypsum boards to meet building energy conservation goals
Sharifi, N. P., Shaikh, A. A. N., & Sakulich, A. R. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.12.046 · Cited by 148
Liu, Y., & Yang, Y. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.08.097 · Cited by 143
Fukahori, R., Nomura, T., Zhu, C., Sheng, N., Okinaka, N., & Akiyama, T. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.164 · Cited by 142
Eutectic Na2CO3–NaCl salt: A new phase change material for high temperature thermal storage
Jiang, Y., Sun, Y., Liu, M., Bruno, F., & Li, S. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.04.002 · Cited by 142
Ye, R., Lin, W., Yuan, K., Fang, X., & Zhang, Z. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.049 · Cited by 142
Tian, H., Wang, W., Ding, J., Wei, X., Song, M. S., & Yang, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.020 · Cited by 141
Xiao, X., Zhang, P., & Li, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.074 · Cited by 140
Nomura, T., Okinaka, N., & Akiyama, T. (2010) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2010.02.007 · Cited by 140
Sun, J., Zhang, R. Y., Liu, Z. P., & Lu, G. H. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.017 · Cited by 139
Use of nano-α-Al2O3 to improve binary eutectic hydrated salt as phase change material
Liu, Y., & Yang, Y. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.09.050 · Cited by 139
Exergetic analysis of a solar thermal power system with PCM storage
Mahfuz, M. H., Kamyar, A., Afshar, O., Sarraf, M., Anisur, M. R., Kibria, M. A., Saidur, R., & Metselaar, H. S. C. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.11.016 · Cited by 137
Deng, Y., Li, J., Qian, T., Guan, W., & Wang, X. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.02.011 · Cited by 136
Fu, L., Wang, Q., Ye, R., Fang, X., & Zhang, Z. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.07.091 · Cited by 132
Applications of solar water heating system with phase change material
Wang, Z., Qiu, F., Yang, W., & Zhao, X. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.184 · Cited by 129
Sodium sulfate–diatomite composite materials for high temperature thermal energy storage
Qin, Y., Leng, G., Yu, X., Cao, H. Q., Qiao, G., Dai, Y., Zhang, Y., & Ding, Y. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.08.075 · Cited by 129
Elmozughi, A. F., Solomon, L. D., Öztekin, A., & Neti, S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.087 · Cited by 118
Liu, M., Gomez, J. C., Turchi, C. S., Tay, N. H. S., Saman, W. Y., & Bruno, F. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.03.014 · Cited by 106
Thermal energy storage enhancement of a binary molten salt via in-situ produced nanoparticles
Luo, Y., Du, X., Awad, A. T., & Wen, D. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.09.004 · Cited by 106
Lopez, J., Acem, Z., & del Barrio, E. P. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.03.014 · Cited by 102
Nkwetta, D. N., Vouillamoz, P.-E., Haghighat, F., Mankibi, M. E., Moreau, A., & Daoud, A. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.03.051 · Cited by 99
Xiao, Q., Yuan, W., Li, L., & Xu, T. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.12.032 · Cited by 99
Liu, Y., Xie, M., Gao, X., Yang, Y., & Sang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.05.042 · Cited by 98
Rao, Z., Zhang, G., Xu, T., & Hong, K. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.03.016 · Cited by 96
Blanco, P., Rodríguez‐Aseguinolaza, J., Risueño, E., & Tello, M. J. (2014) · Energy · doi:10.1016/j.energy.2014.05.058 · Cited by 95
Li, X., Zhou, Y., Nian, H., et al. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.029 · Cited by 95
Jiang, Y., Sun, Y., Bruno, F., & Li, S. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.01.002 · Cited by 91
Yuan, K., Zhou, Y., Sun, W., Fang, X., & Zhang, Z. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.12.021 · Cited by 90
Zhao, B., Cheng, M., Liu, C. X., & Dai, Z. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.03.110 · Cited by 85
Thermal compatibility of Sodium Nitrate/Expanded Perlite composite phase change materials
Li, R., Zhu, J., Zhou, W., Cheng, X., & Li, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.108 · Cited by 83
Fashandi, M., & Leung, S. N. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.01.037 · Cited by 82
Xiao, Q., Fan, J., Fang, Y., Li, L., Xu, T., & Yuan, W. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.053 · Cited by 81
Gasia, J., Miró, L., & Cabeza, L. F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.019 · Cited by 77
Liu, M., Bell, S., Segarra, M., Steven Tay, N. H., Will, G., Saman, W., & Bruno, F. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.05.047 · Cited by 75
Performance study on air-cooled household refrigerator with cold storage phase change materials
Liu, Z., Zhao, D., Wang, Q., Chi, Y., & Zhang, L. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.04.009 · Cited by 73
He, F., Song, G., He, X., Sui, C., & Li, M. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.05.001 · Cited by 72
Glass encapsulated phase change materials for high temperature thermal energy storage
Giménez-Gavarrell, P., & Fereres, S. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.02.005 · Cited by 70
Magro, F. D., Savino, S., Meneghetti, A., & Nardin, G. (2017) · Energy · doi:10.1016/j.energy.2017.04.051 · Cited by 70
Ma, G., Liu, S., Xie, S., Jing, Y., Zhang, Q., Sun, J., & Jia, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.004 · Cited by 67
Dadollahi, M., & Mehrpooya, M. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.171 · Cited by 62
Thermodynamic analysis of directionally influenced phase change material embedded building walls
Saikia, P., Azad, A. S., & Rakshit, D. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.12.029 · Cited by 61
Zinc-rich eutectic alloys for high energy density latent heat storage applications
Risueño, E., Faik, A., Gil, A., Rodríguez‐Aseguinolaza, J., Tello, M. J., & D’Aguanno, B. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.02.173 · Cited by 54
Li, Y., Lin, H. L., Hejazi, S. M., Zhao, C., & Xie, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.110 · Cited by 52
Qian, T., Li, J., Min, X., Deng, Y., Guan, W., & Ning, L. (2016) · Energy · doi:10.1016/j.energy.2016.07.023 · Cited by 47
Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material
Wu, J., Li, J., Xu, X., Yang, L., Ju-fang, W., Fang, Z., & Chuan-guo, L. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-4651-2 · Cited by 41
Fornarelli, F., Ceglie, V., Fortunato, B., Camporeale, S. M., Torresi, M., Oresta, P., & Miliozzi, A. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.08.220 · Cited by 40
Gokon, N., Nakamura, S., Yamaguchi, T., & Kodama, T. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.145 · Cited by 37
Gokon, N., Yamaguchi, T., & Kodama, T. (2016) · Energy · doi:10.1016/j.energy.2016.07.005 · Cited by 28
Al/Al2O3 Form-Stable Phase Change Material for High Temperature Thermal Energy Storage
Xu, Y., He, Y., Zhu, G., Lv, S., & Bo, S. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.907 · Cited by 21
Latent Heat Based High Temperature Solar Thermal Energy Storage for Power Generation
Cárdenas, B., & León, N. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.10.212 · Cited by 17
Molten Salts/Ceramic-Foam Matrix Composites by Melt Infiltration Method as Energy Storage Material
Wu, Jianfeng, Li, Jian, J. I. A. N., Xu, Xiaohong, Yang, Lanfang, Jufang, Zhao, Z., et al. (2009) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 13
Cited by
Phase change material thermal energy storage systems for cooling applications in buildings: A review
Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109579 · Cited by 519
Yuan, K., Shi, J., Aftab, W., Qin, M., Usman, A., Zhou, F., Lv, Y., Gao, S., & Zou, R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904228 · Cited by 459
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.101913 · Cited by 354
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Metadata
- Authors
- Lin, Y., Alva, G., & Fang, G.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 165
- Pages
- 685-708
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2891107018
- Cited by
- 502
- References
- 98
- FWCI
- 25.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.