The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Studies on optimum fins number in PCM-based heat sinks
Abstract
Abstract Phase change material (PCM) based heat sink is an appropriate technique for electronic devices cooling. PCM-based heat sinks have a low overall thermal conductivity. Using vertical fins is a brilliant approach to tackle low thermal conductivity issue. The aim of this study is to present a correlation to estimate the optimum number of fins and optimum PCM volume fraction in a PCM-based heat sink. The objective function is defined as the longest safe operating time of the device prior to reach the critical temperature. The independent parameters are heat sink height, fin thickness and heat flux. Around 900 various geometries of heat sink in the height range of 10–30 mm, fin thickness range of 0.2–0.5 mm were studied for two different input heat fluxes of 5000 and 10000 W m 2 to find the optimal number of fins. The analysis of variance was used to investigate the regression model reasonableness and find the main and interaction effects among the input parameters. The Results reveal that the optimal number of fins decreases by increasing the fin thickness. The increase in heat sink height results in higher optimal fin spacing, which consequently decreases the optimal number of fins. For a heat sink with constant width, a larger number of fins is required to prevent interfering with thermal performance, as the heat flux increases. The proposed correlations cover the Rayleigh number range of 3.3 × 10 6 ≤ R a ≤ 5.4 × 10 8 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Qureshi, Z. A., Ali, H. M., & Khushnood, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.049 · Cited by 697
Cited by
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
A review of the state-of-the-art in electronic cooling
Zhang, Z., Wang, X., & Yan, Y. (2021) · e-Prime - Advances in Electrical Engineering, Electronics and Energy · doi:10.1016/j.prime.2021.100009 · Cited by 310
Thermal management of the lithium-ion battery by the composite PCM-Fin structures
Sun, Z., Fan, R., Yan, F., Zhou, T., & Zheng, N. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118739 · Cited by 288
Phase Change Materials Application in Battery Thermal Management System: A Review
Liu, C., Xu, D., Weng, J., Zhou, S., Li, W., Wan, Y., Jiang, S., Zhou, D., Wang, J., & Huang, Q. (2020) · Materials · doi:10.3390/ma13204622 · Cited by 282
Phase change materials for thermal management and energy storage: A review
Lawag, R. A., & Ali, H. M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105602 · Cited by 279
Metadata
- Authors
- Kalbasi, R., Afrand, M., Alsarraf, J., & Tran, M.-D.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 171
- Pages
- 1088-1099
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2910228930
- Cited by
- 221
- References
- 1
- FWCI
- 17.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Studies on optimum fins number in PCM-based heat sinks. https://app.cochat.ai/papers/10.1016/j.energy.2019.01.070
- The paper
- Kalbasi, R., Afrand, M., Alsarraf, J., & Tran, M.-D. (2019). Studies on optimum fins number in PCM-based heat sinks. Energy. https://doi.org/10.1016/j.energy.2019.01.070
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.