Solar pyrolysis of cotton stalk in molten salt for bio-fuel production
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Solar pyrolysis of cotton stalk was carried out in a molten salt reactor heated by 4 kW solar simulator. The effects of pyrolysis temperature and mass ratio of molten salt to biomass on pyrolysis products properties were investigated. The use of molten salt as pyrolysis media increased gas yield. At 850 °C, the gas yield (mainly of CO and H2) continued to rise from 41.35 wt% to 82.57 wt% when mass ratio of molten salt to cotton stalk increased from 0 to 10. Pyrolysis in molten salt significantly decreased bio-oil acids and phenols, while increased aromatics among pyrolysis temperature range of 450–850 °C. There was positive correlation between the increased content of aromatics and mass ratio of molten salt to cotton stalk (from 0.5 to 10). The bio-char carbon content showed a general decreasing trend while oxygen, BET surface area and pore volume increased with using molten salt as pyrolysis media. Bio-char obtained from CS1MS5 pyrolysis at 850 °C had the highest BET surface area of 972.57 m2/g and the biggest total pore volume of 0.6203 cm3/g. High quality pyrolysis products with more uniform chemistry suggest catalytic reactions occur inside the solar reactor due to the intermediates degradation with molten salt.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, K. H., Kim, J.-Y., Cho, T.-S., & Choi, J. W. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.04.094 · Cited by 696 · cited 2×
“Intensifying volatile release with increasing temperature caused the increase of surface area and pore volume [50].”
BackgroundA review on operating parameters for optimum liquid oil yield in biomass pyrolysis
Akhtar, J., & Saidina Amin, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.033 · Cited by 692
In situ catalytic pyrolysis of lignocellulose using alkali-modified amorphous silica alumina
Zabeti, M., Nguyen, T. S., Lefferts, L., Heeres, H. J., & Seshan, K. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.034 · Cited by 129 · cited 1×
“In the presence of alkali and alkaline earth metal catalyst, lignin-derived phenolics undergo oxygen-aromatic carbon bond cleavage to form aromatic hydrocarbons [48,49].”
Background
Cited by
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Self-citationTiwari, S. K., Bystrzejewski, M., De Adhikari, A., Huczko, A., & Wang, N. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101023 · Cited by 218
Zhu, X., Sun, M., Zhu, X., Guo, W., Luo, Z., Cai, W., & Zhu, X. (2023) · Fuel · doi:10.1016/j.fuel.2022.126565 · Cited by 74
Parthasarathy, P., Al-Ansari, T., Mackey, H. R., Sheeba Narayanan, K., & McKay, G. (2022) · Fuel · doi:10.1016/j.fuel.2022.123378 · Cited by 69
Metadata
- Authors
- Xie, Y., Zeng, K., Flamant, G., Yang, H., Liu, N., He, X., Yang, X., Nzihou, A., & Chen, H.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 179
- Pages
- 1124-1132
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2946042287
- Cited by
- 82
- References
- 3
- FWCI
- 3.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solar pyrolysis of cotton stalk in molten salt for bio-fuel production. https://app.cochat.ai/papers/10.1016/j.energy.2019.05.055
- The paper
- Xie, Y., Zeng, K., Flamant, G., Yang, H., Liu, N., He, X., Yang, X., Nzihou, A., & Chen, H. (2019). Solar pyrolysis of cotton stalk in molten salt for bio-fuel production. Energy. https://doi.org/10.1016/j.energy.2019.05.055
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.