The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Intelligent Manufacturing in the Context of Industry 4.0: A Review
Open accessAbstract
Our next generation of industry—Industry 4.0—holds the promise of increased flexibility in manufacturing, along with mass customization, better quality, and improved productivity. It thus enables companies to cope with the challenges of producing increasingly individualized products with a short lead-time to market and higher quality. Intelligent manufacturing plays an important role in Industry 4.0. Typical resources are converted into intelligent objects so that they are able to sense, act, and behave within a smart environment. In order to fully understand intelligent manufacturing in the context of Industry 4.0, this paper provides a comprehensive review of associated topics such as intelligent manufacturing, Internet of Things (IoT)-enabled manufacturing, and cloud manufacturing. Similarities and differences in these topics are highlighted based on our analysis. We also review key technologies such as the IoT, cyber-physical systems (CPSs), cloud computing, big data analytics (BDA), and information and communications technology (ICT) that are used to enable intelligent manufacturing. Next, we describe worldwide movements in intelligent manufacturing, including governmental strategic plans from different countries and strategic plans from major international companies in the European Union, United States, Japan, and China. Finally, we present current challenges and future research directions. The concepts discussed in this paper will spark new ideas in the effort to realize the much-anticipated Fourth Industrial Revolution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internet of Things (IoT): A vision, architectural elements, and future directions
Gubbi, J., Buyya, R., Marusic, S., & Palaniswami, M. (2013) · Future Generation Computer Systems · doi:10.1016/j.future.2013.01.010 · Cited by 12,293
The NIST definition of cloud computing
Mell, P. M., & Grance, T. (2011) · doi:10.6028/nist.sp.800-145 · Cited by 11,795
Armbrust, M., Fox, A., Griffith, R., Joseph, A. D., Katz, R., Konwinski, A., Lee, G., Patterson, D., Rabkin, A., Stoica, I., et al. (2010) · Communications of the ACM · doi:10.1145/1721654.1721672 · Cited by 9,464
Internet of Things for Smart Cities
Zanella, A., Bui, N., Castellani, A., Vangelista, L., & Zorzi, M. (2014) · IEEE Internet of Things Journal · doi:10.1109/jiot.2014.2306328 · Cited by 6,292
Buyya, R., Yeo, C. S., Venugopal, S., Broberg, J., & Brandic, I. (2009) · Future Generation Computer Systems · doi:10.1016/j.future.2008.12.001 · Cited by 5,937
(2011) · Cited by 5,203
Internet of Things in industries: A survey
Xu, L. D., He, W., & Li, S. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300753 · Cited by 5,172
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
Lasi, H., Fettke, P., Kemper, H.-G., Feld, T., & Hoffmann, M. (2014) · Business & Information Systems Engineering · doi:10.1007/s12599-014-0334-4 · Cited by 4,276
Cyber Physical Systems: Design Challenges
Lee, E. A. (2008) · 2008 11th IEEE International Symposium on Object and Component-Oriented Real-Time Distributed Computing (ISORC) · doi:10.1109/isorc.2008.25 · Cited by 3,525
Cloud computing: state-of-the-art and research challenges
Zhang, Q., Cheng, L., & Boutaba, R. (2010) · Journal of Internet Services and Applications · doi:10.1007/s13174-010-0007-6 · Cited by 3,515
Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment
Lee, J., Kao, H.-A., & Yang, S. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.02.001 · Cited by 1,965
How ‘big data’ can make big impact: findings from a systematic review and a longitudinal case study
Fosso Wamba, S., Akter, S., Edwards, A., Chopin, G., & Gnanzou, D. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.12.031 · Cited by 1,905
From cloud computing to cloud manufacturing
Xu, X. (2012) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2011.07.002 · Cited by 1,780
Self-citationLee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Wang, Y., Kung, L., & Byrd, T. A. (2018) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.12.019 · Cited by 1,571
The Internet of Things—A survey of topics and trends
Whitmore, A., Agarwal, A., & Da Xu, L. (2015) · Information Systems Frontiers · doi:10.1007/s10796-014-9489-2 · Cited by 1,568
Implementing Smart Factory of Industrie 4.0: An Outlook
Wang, S., Wan, J., Li, D., & Zhang, C. (2016) · International Journal of Distributed Sensor Networks · doi:10.1155/2016/3159805 · Cited by 1,521
Wang, S., Wan, J., Zhang, D., Li, D., & Zhang, C. (2016) · Computer Networks · doi:10.1016/j.comnet.2015.12.017 · Cited by 1,404
Brettel, M., Friederichsen, N., Keller, M., & Rosenberg, M. (2014) · RWTH Publications (RWTH Aachen) · doi:10.5281/zenodo.1336426 · Cited by 1,362
Recent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
Understanding the determinants of RFID adoption in the manufacturing industry
Wang, Y.-M., Wang, Y.-S., & Yang, Y.-F. (2010) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2010.03.006 · Cited by 912
Xia, F., Yang, L. T., Wang, L., & Vinel, A. (2012) · International Journal of Communication Systems · doi:10.1002/dac.2417 · Cited by 846
Applications of artificial intelligence in intelligent manufacturing: a review
Li, B.-H., Hou, B.-C., Yu, W.-T., Lu, X.-B., & Yang, C.-W. (2017) · Frontiers of Information Technology & Electronic Engineering · doi:10.1631/fitee.1601885 · Cited by 826
Cloud manufacturing: a new manufacturing paradigm
Zhang, L., Luo, Y., Tao, F., Li, B. H., Ren, L., Zhang, X., Guo, H., Cheng, Y., Hu, A., & Liu, Y. (2014) · Enterprise Information Systems · doi:10.1080/17517575.2012.683812 · Cited by 810
Agent-Based Systems for Intelligent Manufacturing: A State-of-the-Art Survey
Shen, W., & Norrie, D. H. (1999) · Knowledge and Information Systems · doi:10.1007/bf03325096 · Cited by 808
Smart manufacturing, manufacturing intelligence and demand-dynamic performance
Davis, J., Edgar, T., Porter, J., Bernaden, J., & Sarli, M. (2012) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.06.037 · Cited by 762
Modeling Cyber–Physical Systems
Derler, P., Lee, E. A., & Vincentelli, A. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2160929 · Cited by 762
Progress on information and communication technologies in hospitality and tourism
Law, R., Buhalis, D., & Cobanoglu, C. (2014) · International Journal of Contemporary Hospitality Management · doi:10.1108/ijchm-08-2013-0367 · Cited by 748
CCIoT-CMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System
Tao, F., Cheng, Y., Xu, L. D., Zhang, L., & Li, B. H. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306383 · Cited by 722
Internet of Things for Enterprise Systems of Modern Manufacturing
Bi, Z., Xu, L. D., & Wang, C. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300338 · Cited by 672
The Distinct Effects of Information Technology and Communication Technology on Firm Organization
Bloom, N., Garicano, L., Sadun, R., & Van Reenen, J. (2014) · Management Science · doi:10.1287/mnsc.2014.2013 · Cited by 644
Cloud manufacturing:a new service-oriented networked manufacturing model
Xu-dong, C. (2010) · Cited by 635
Visual Computing as a Key Enabling Technology for Industrie 4.0 and Industrial Internet
Posada, J., Toro, C., Barandiaran, I., Oyarzun, D., Stricker, D., de Amicis, R., Pinto, E. B., Eisert, P., Dollner, J., & Vallarino, I. (2015) · IEEE Computer Graphics and Applications · doi:10.1109/mcg.2015.45 · Cited by 619
Ubiquitous Data Accessing Method in IoT-Based Information System for Emergency Medical Services
Xu, B., Xu, L. D., Cai, H., Xie, C., Hu, J., & Bu, F. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306382 · Cited by 615
Monostori, L. (2019) · CIRP Encyclopedia of Production Engineering · doi:10.1007/978-3-662-53120-4_16790 · Cited by 606
IoT-Based Intelligent Perception and Access of Manufacturing Resource Toward Cloud Manufacturing
Tao, F., Zuo, Y., Xu, L. D., & Zhang, L. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306397 · Cited by 587
Smart community: an internet of things application
Li, X., Lu, R., Liang, X., Shen, X., Chen, J., & Lin, X. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.6069711 · Cited by 586
Zhong, R. Y., Newman, S. T., Huang, G. Q., & Lan, S. (2016) · Computers & Industrial Engineering · doi:10.1016/j.cie.2016.07.013 · Cited by 586
Self-citationCloud manufacturing: Strategic vision and state-of-the-art
Wu, D., Greer, M. J., Rosen, D. W., & Schaefer, D. (2013) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2013.04.008 · Cited by 556
Applications of agent-based systems in intelligent manufacturing: An updated review
Shen, W., Hao, Q., Yoon, H. J., & Norrie, D. H. (2006) · Advanced Engineering Informatics · doi:10.1016/j.aei.2006.05.004 · Cited by 554
A Comparative Study into Distributed Load Balancing Algorithms for Cloud Computing
Randles, M., Lamb, D. J., & Taleb-Bendiab, A. (2010) · International Conference on Advanced Information Networking and Applications Workshops (WAINA) · doi:10.1109/waina.2010.85 · Cited by 533
A big data approach for logistics trajectory discovery from RFID-enabled production data
Zhong, R. Y., Huang, G. Q., Lan, S., Dai, Q. Y., Chen, X., & Zhang, T. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2015.02.014 · Cited by 464
Self-citationAuto ID systems and intelligent manufacturing control
McFarlane, D., Sarma, S., Chirn, J. L., Wong, C. Y., & Ashton, K. (2003) · Engineering Applications of Artificial Intelligence · doi:10.1016/s0952-1976(03)00077-0 · Cited by 462
RFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462
Self-citationA Review on Internet of Things (IoT)
U.Farooq, M., Waseem, M., Mazhar, S., Khairi, A., & Kamal, T. (2015) · International Journal of Computer Applications · doi:10.5120/19787-1571 · Cited by 453
IOT Gateway: BridgingWireless Sensor Networks into Internet of Things
Zhu, Q., Wang, R., Chen, Q., Liu, Y., & Qin, W. (2010) · 2010 IEEE/IFIP International Conference on Embedded and Ubiquitous Computing · doi:10.1109/euc.2010.58 · Cited by 443
A Manufacturing Big Data Solution for Active Preventive Maintenance
Wan, J., Tang, S., Li, D., Wang, S., Liu, C., Abbas, H., & Vasilakos, A. V. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2670505 · Cited by 441
(2012) · PubMed · Cited by 435
Prefabricated construction enabled by the Internet-of-Things
Zhong, R. Y., Peng, Y., Xue, F., Fang, J., Zou, W., Luo, H., Thomas Ng, S., Lu, W., Shen, G. Q. P., & Huang, G. Q. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.01.006 · Cited by 395
Self-citationReaching for the “cloud”: How SMEs can manage
Sultan, N. A. (2011) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2010.08.001 · Cited by 389
Shrouf, F., & Miragliotta, G. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.03.055 · Cited by 380
IoT-based real-time production logistics synchronization system under smart cloud manufacturing
Qu, T., Lei, S. P., Wang, Z. Z., Nie, D. X., Chen, X., & Huang, G. Q. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7220-1 · Cited by 356
Cloud Migration: A Case Study of Migrating an Enterprise IT System to IaaS
Khajeh-Hosseini, A., Greenwood, D., & Sommerville, I. (2010) · 2010 IEEE 3rd International Conference on Cloud Computing · doi:10.1109/cloud.2010.37 · Cited by 355
A Survey of Load Balancing in Cloud Computing: Challenges and Algorithms
Nuaimi, K. A., Mohamed, N., Nuaimi, M. A., & Al-Jaroodi, J. (2012) · 2012 Second Symposium on Network Cloud Computing and Applications · doi:10.1109/ncca.2012.29 · Cited by 322
Industry 4.0 and Cloud Manufacturing: A Comparative Analysis
Liu, Y., & Xu, X. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4034667 · Cited by 310
Self-citationAn interoperable solution for Cloud manufacturing
Vincent Wang, X., & Xu, X. W. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2013.01.005 · Cited by 290
Self-citationReal-time information capturing and integration framework of the internet of manufacturing things
Zhang, Y., Zhang, G., Wang, J., Sun, S., Si, S., & Yang, T. (2015) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2014.900874 · Cited by 274
Poon, T. C., Choy, K. L., Chow, H. K. H., Lau, H. C. W., Chan, F. T. S., & Ho, K. C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.10.011 · Cited by 266
Enabling high-level application development for the Internet of Things
Patel, P., & Cassou, D. (2015) · Journal of Systems and Software · doi:10.1016/j.jss.2015.01.027 · Cited by 252
Visualization of RFID-enabled shopfloor logistics Big Data in Cloud Manufacturing
Zhong, R. Y., Lan, S., Xu, C., Dai, Q., & Huang, G. Q. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7702-1 · Cited by 244
Self-citationDynamic self-organization in holonic multi-agent manufacturing systems: The ADACOR evolution
Barbosa, J., Leitão, P., Adam, E., & Trentesaux, D. (2015) · Computers in Industry · doi:10.1016/j.compind.2014.10.011 · Cited by 240
Workload-based multi-task scheduling in cloud manufacturing
Liu, Y., Xu, X. W., Li, Z., Wang, L., & Zhong, R. Y. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2016.09.008 · Cited by 240
Self-citationRFID-based wireless manufacturing for real-time management of job shop WIP inventories
Huang, G. Q., Zhang, Y., & Jiang, P. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0897-4 · Cited by 234
Button, D., Harrington, A., & Belan, I. (2014) · Nurse Education Today · doi:10.1016/j.nedt.2013.05.002 · Cited by 226
Advances in Product Family and Product Platform Design: Methods & Applications
(2014) · Springer eBooks · doi:10.1007/978-1-4614-7937-6 · Cited by 216
Machine Tool 4.0 for the new era of manufacturing
Xu, X. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0300-7 · Cited by 210
Self-citationPhysical assets and service sharing for IoT-enabled Supply Hub in Industrial Park (SHIP)
Qiu, X., Luo, H., Xu, G., Zhong, R., & Huang, G. Q. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.09.001 · Cited by 203
Self-citationKey Challenges in Cloud Computing: Enabling the Future Internet of Services
Moreno-Vozmediano, R., Montero, R. S., & Llorente, I. M. (2013) · IEEE Internet Computing · doi:10.1109/mic.2012.69 · Cited by 202
Guo, Z. X., Ngai, E. W. T., Yang, C., & Liang, X. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.09.004 · Cited by 194
Industry 4.0 and Cloud Manufacturing: A Comparative Analysis
Liu, Y., & Xu, X. (2016) · Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing · doi:10.1115/msec2016-8726 · Cited by 194
Self-citationValue creation through design for scalability of reconfigurable manufacturing systems
Koren, Y., Wang, W., & Gu, X. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1145821 · Cited by 185
A prototype architecture for cyber-physical systems
Tan, Y., Goddard, S., & Pérez, L. C. (2008) · ACM SIGBED Review · doi:10.1145/1366283.1366309 · Cited by 176
An agent-based service-oriented integration architecture for collaborative intelligent manufacturing
Shen, W., Hao, Q., Wang, S., Li, Y., & Ghenniwa, H. (2007) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2006.02.009 · Cited by 174
Information Communication Technology (ICT) Adoption Among SME Owners in Malaysia
Hashim, J. (2007) · International journal of business and information/International journal of business & information · Cited by 157
Portability and Interoperability between Clouds: Challenges and Case Study
Petcu, D. (2011) · Lecture notes in computer science · doi:10.1007/978-3-642-24755-2_6 · Cited by 150
RFID-enabled real-time wireless manufacturing for adaptive assembly planning and control
Huang, G. Q., Zhang, Y. F., Chen, X., & Newman, S. T. (2008) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-008-0121-5 · Cited by 148
Self-citationKeller, J., & von der Gracht, H. A. (2013) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2013.07.010 · Cited by 147
Jiang, B., & Fei, Y. (2014) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2347043 · Cited by 147
Huang, B., Li, C., & Tao, F. (2013) · Enterprise Information Systems · doi:10.1080/17517575.2013.792396 · Cited by 140
Parallel scheduling for cyber-physical systems: analysis and case study on a self-driving car
Kim, J., Kim, H., Lakshmanan, K., & Rajkumar, R. (2013) · ACM/IEEE International Conference on Cyber-Physical Systems (ICCPS) · doi:10.1145/2502524.2502530 · Cited by 128
Combined strength of holons, agents and function blocks in cyber-physical systems
Wang, L., & Haghighi, A. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.05.002 · Cited by 127
Zhong, R. Y., Huang, G. Q., Lan, S., Dai, Q., Zhang, T., & Xu, C. (2015) · Advanced Engineering Informatics · doi:10.1016/j.aei.2015.01.002 · Cited by 125
Self-citationAli, S., Qaisar, S., Saeed, H., Khan, M. F., Naeem, M., & Anpalagan, A. (2015) · Sensors · doi:10.3390/s150407172 · Cited by 119
A Portrait of an ISO STEP Tolerancing Standard as an Enabler of Smart Manufacturing Systems
Feeney, A. B., Frechette, S., & Srinivasan, V. (2014) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4029050 · Cited by 113
Towards intelligent manufacturing planning and control systems
Zijm, W. H. M. (2000) · OR Spectrum · doi:10.1007/s002919900032 · Cited by 103
Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed
Helu, M., & Hedberg, T. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.066 · Cited by 101
Implementing a real-time cyber-physical system test bed in RTDS and OPNET
Chen, B., Butler-Purry, K. L., Goulart, A., & Kundur, D. (2014) · North American Power Symposium (NAPS) · doi:10.1109/naps.2014.6965381 · Cited by 100
Multi-factor Authentication Framework for Cloud Computing
Banyal, R. K., Jain, P., & Jain, V. K. (2013) · International Conference on Computational Intelligence, Modelling and Simulation · doi:10.1109/cimsim.2013.25 · Cited by 98
Limbu, Y. B., Jayachandran, C., & Babin, B. J. (2014) · Industrial Marketing Management · doi:10.1016/j.indmarman.2014.06.013 · Cited by 96
A Service-Based Approach to Designing Cyber Physical Systems
La, H. J., & Kim, S. D. (2010) · IEEE/ACIS International Conference on Computer and Information Science (ICIS) · doi:10.1109/icis.2010.73 · Cited by 96
Towards a griddable distributed manufacturing system with augmented reality interfaces
Yew, A. W. W., Ong, S. K., & Nee, A. Y. C. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.12.002 · Cited by 88
Cross-Domain Internet of Things Application Development: M3 Framework and Evaluation
Gyrard, A., Datta, S. K., Bonnet, C., & Boudaoud, K. (2015) · International Conference on Future Internet of Things and Cloud (FiCloud) · doi:10.1109/ficloud.2015.10 · Cited by 77
Where are we at with Cloud Computing?: A Descriptive Literature Review
Yang, H., & Tate, M. (2009) · Journal of the Association for Information Systems · Cited by 67
Dynamic production system diagnosis and prognosis using model-based data-driven method
Zou, J., Chang, Q., Arinez, J. F., Xiao, G., & Lei, Y. L. (2017) · Expert Systems with Applications · doi:10.1016/j.eswa.2017.03.025 · Cited by 56
Automating design with intelligent human–machine integration
Yin, Y. H., Nee, A. Y. C., Ong, S. K., Zhu, J. Y., Gu, P. H., & Chen, L. J. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.008 · Cited by 53
RFID- enabled product-service system for automotive part and accessory manufacturing alliances
Huang, G. Q., Qu, T., Zhang, Y., & Yang, H. (2012) · International Journal of Production Research · doi:10.1080/00207543.2011.592863 · Cited by 53
Wang, M., Qu, T., Zhong, R. Y., Dai, Q., Zhang, X. W., & He, J. B. (2011) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2011.575183 · Cited by 49
Self-citationCloud Computing for Power System Simulations at ISO New England—Experiences and Challenges
Ma, F., Luo, X., & Litvinov, E. (2016) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2569493 · Cited by 46
Intelligent Manufacturing Systems
Öztemel, E. (2010) · Springer series in advanced manufacturing · doi:10.1007/978-1-84996-119-6_1 · Cited by 42
Luo, M., Yan, H.-C., Hu, B., Zhou, J., & Pang, C. K. (2015) · Computers & Industrial Engineering · doi:10.1016/j.cie.2015.04.008 · Cited by 40
Cloud Computing as a Catalyst in STEM Education
Kumar, V., & Sharma, D. (2017) · International Journal of Information and Communication Technology Education · doi:10.4018/ijicte.2017040104 · Cited by 36
Antrobus, V., Burnett, G., & Krehl, C. (2016) · Ergonomics · doi:10.1080/00140139.2016.1172736 · Cited by 32
A hybrid information fusion approach to safety risk perception using sensor data under uncertainty
Wu, X., Duan, J., Zhang, L., & AbouRizk, S. (2017) · Stochastic Environmental Research and Risk Assessment · doi:10.1007/s00477-017-1389-9 · Cited by 27
Discovering the potential of cloud computing in accelerating the search for curing serious illnesses
Sultan, N. A. (2014) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2013.12.012 · Cited by 25
Lin, Y., Chang, T., Fan, C., Anthony, J., Petway, J. R., Lien, W.-Y., Liang, C.-P., & Ho, Y.-F. (2017) · Environments · doi:10.3390/environments4010006 · Cited by 23
Machado, A. T. G. D. M., de Lima, Â. M. D., de Abreu, D. M. X., Araújo, L. L., Sobrinho, D. F., Lopes, É. A. S., Teixeira, G. H. S., & dos Santos, A. D. F. (2017) · Journal of Ambulatory Care Management · doi:10.1097/jac.0000000000000187 · Cited by 9
Cited by
Dwivedi, Y. K., Hughes, L., Ismagilova, E., Aarts, G., Coombs, C., Crick, T., Duan, Y., Dwivedi, R., Edwards, J., Eirug, A., et al. (2021) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2019.08.002 · Cited by 4,611
“AI centric technologies will be able to monitor and control processes in real time o ff ering signi fi cant e ffi ciencies over manual processes (Jain & Mosier, 1992; Zhong, Xu, Klotz, & Newman, 2017a).”
BackgroundIndustry 4.0 technologies: Implementation patterns in manufacturing companies
Frank, A. G., Dalenogare, L. S., & Ayala, N. F. (2019) · International Journal of Production Economics · doi:10.1016/j.ijpe.2019.01.004 · Cited by 2,958
Industry 4.0 and Industry 5.0—Inception, conception and perception
Xu, X., Lu, Y., Vogel-Heuser, B., & Wang, L. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.10.006 · Cited by 2,557
Self-citationDigital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
Tao, F., Qi, Q., Wang, L., & Nee, A. Y. C. (2019) · Engineering · doi:10.1016/j.eng.2019.01.014 · Cited by 1,487
Metadata
- Authors
- Zhong, R. Y., Xu, X., Klotz, E., & Newman, S. T.
- Venue
- Engineering
- Publisher
- Elsevier BV
- Published
- 2017-10
- Volume
- 3
- Issue
- 5
- Pages
- 616-630
- ISSN
- 2095-8099 (ISSN-L)
- OpenAlex
- W2767346351
- Cited by
- 2,913
- References
- 107
- FWCI
- 235.72
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.