Architectural Design and Additive Manufacturing of Mechanical Metamaterials: A Review
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Mechanical metamaterials can be defined as a class of architected materials that exhibit unprecedented mechanical properties derived from designed artificial architectures rather than their constituent materials. While macroscale and simple layouts can be realized by conventional top-down manufacturing approaches, many of the sophisticated designs at various length scales remain elusive, due to the lack of adequate manufacturing methods. Recent progress in additive manufacturing (AM) has led to the realization of a myriad of novel metamaterial concepts. AM methods capable of fabricating microscale architectures with high resolution, arbitrary complexity, and high feature fidelity have enabled the rapid development of architected metamaterials and drastically reduced the design-computation and experimental-validation cycle. This paper first provides a detailed review of various topologies based on the desired mechanical properties, including stiff, strong, and auxetic (negative Poisson’s ratio) metamaterials, followed by a discussion of the AM technologies capable of fabricating these metamaterials. Finally, we discuss current challenges and recommend future directions for AM and mechanical metamaterials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A survey on deep learning in medical image analysis
Litjens, G., Kooi, T., Bejnordi, B. E., Setio, A. A. A., Ciompi, F., Ghafoorian, M., van der Laak, J. A. W. M., van Ginneken, B., & Sánchez, C. I. (2017) · Medical Image Analysis · doi:10.1016/j.media.2017.07.005 · Cited by 15,332
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Building high-level features using large scale unsupervised learning
Le, Q. V. (2013) · 2013 IEEE International Conference on Acoustics, Speech and Signal Processing · doi:10.1109/icassp.2013.6639343 · Cited by 1,695
Polymer-polymer phase behavior
Bates, F. S. (1991) · Science · doi:10.1126/science.251.4996.898 · Cited by 1,463
Stable and unstable phases of a diblock copolymer melt
Matsen, M. W., & Schick, M. (1994) · Physical Review Letters · doi:10.1103/physrevlett.72.2660 · Cited by 1,417
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Direct laser writing of three-dimensional photonic-crystal templates for telecommunications
Deubel, M., von Freymann, G., Wegener, M., Pereira, S., Busch, K., & Soukoulis, C. M. (2004) · Nature Materials · doi:10.1038/nmat1155 · Cited by 1,083
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Metadata
- Authors
- Lu, C., Hsieh, M., Huang, Z., Zhang, C., Lin, Y., Shen, Q., Chen, F., & Zhang, L.
- Venue
- Engineering
- Publisher
- Elsevier BV
- Published
- 2022-10
- Volume
- 17
- Pages
- 44-63
- ISSN
- 2095-8099 (ISSN-L)
- OpenAlex
- W4281730329
- Cited by
- 212
- References
- 21
- FWCI
- 14.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Architectural Design and Additive Manufacturing of Mechanical Metamaterials: A Review. https://app.cochat.ai/papers/10.1016/j.eng.2021.12.023
- The paper
- Lu, C., Hsieh, M., Huang, Z., Zhang, C., Lin, Y., Shen, Q., Chen, F., & Zhang, L. (2022). Architectural Design and Additive Manufacturing of Mechanical Metamaterials: A Review. Engineering. https://doi.org/10.1016/j.eng.2021.12.023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.