The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Fracture analysis of sandstone with a single filled flaw under uniaxial compression
Abstract
Abstract Natural rock joints with infilling materials such as clay, broken rock fragments, or even cement mortar infusion material are common in the field of rock engineering. The fracture behavior of a rock with a filled flaw is related to both the flaw inclination and mechanical properties of the infilling materials. In this study, uniaxial compression experiments were performed for sandstone specimens with different flaw inclinations varying from 0° to 90°, and four kinds of infilling conditions, including no filler, gypsum filler, cement filler, and resin filler were considered. The damage process of specimens was revealed and traced by acoustic emission (AE) and digital image correlation (DIC) to comprehensively understand the cracking evolution. Macroscopic cracking information was recorded with a high-resolution camera, and crack patterns were identified and classified. The influence of infilling material and flaw inclination on the sandstone cracking process was studied. The tensile stress was found to be suppressed due to the existence of infilling materials, and different infilling materials have different effects on the crack initiation stress. As a result, specimens with a filled flaw have larger crack initiation stress levels and smaller crack inclination angles than specimens with an unfilled flaw. The effects of infilling materials and flaw inclination angles on crack initiation are analyzed with a theoretical model based on the Coulomb friction law. The compressibility effect of infilling materials on the cracking behavior is also investigated through displacement and strain fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
Pan, B., Qian, K., Xie, H., & Asundi, A. (2009) · Measurement Science and Technology · doi:10.1088/0957-0233/20/6/062001 · Cited by 3,166
Strain-energy-density factor applied to mixed mode crack problems
Sih, G. C. (1974) · International Journal of Fracture · doi:10.1007/bf00035493 · Cited by 2,304
Crack coalescence in a rock-like material containing two cracks
Wong, R. H. C., & Chau, K. T. (1998) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/s0148-9062(97)00303-3 · Cited by 568
Coalescence of multiple flaws in a rock-model material in uniaxial compression
Sagong, M., & Bobet, A. (2002) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/s1365-1609(02)00027-8 · Cited by 566
Wong, R. H. C., Chau, K. T., Tang, C. A., & Lin, P. (2001) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/s1365-1609(01)00064-8 · Cited by 559
The initiation of secondary cracks in compression
Bobet, A. (2000) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(00)00009-6 · Cited by 452
Zhang, X.-P., & Wong, L. N. Y. (2013) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-012-0323-1 · Cited by 391
Coalescence of fractures under shear stresses in experiments
Shen, B., Stephansson, O., Einstein, H. H., & Ghahreman, B. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb00040 · Cited by 370
Frictional crack initiation and propagation analysis using the numerical manifold method
Wu, Z., & Wong, L. N. Y. (2012) · Computers and Geotechnics · doi:10.1016/j.compgeo.2011.08.011 · Cited by 318
Self-citation
Metadata
- Authors
- Miao, S., Pan, P.-Z., Wu, Z., Li, S., & Zhao, S.
- Venue
- Engineering Fracture Mechanics
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 204
- Pages
- 319-343
- ISSN
- 0013-7944 (ISSN-L)
- OpenAlex
- W2897080882
- Cited by
- 290
- References
- 13
- FWCI
- 12.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fracture analysis of sandstone with a single filled flaw under uniaxial compression. https://app.cochat.ai/papers/10.1016/j.engfracmech.2018.10.009
- The paper
- Miao, S., Pan, P.-Z., Wu, Z., Li, S., & Zhao, S. (2018). Fracture analysis of sandstone with a single filled flaw under uniaxial compression. Engineering Fracture Mechanics. https://doi.org/10.1016/j.engfracmech.2018.10.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.