The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Analysis, design and testing of an hourglass-shaped copper energy dissipation device
Open accessAbstract
Abstract The behavior of a bi-directional energy dissipation device made of copper was investigated. The development considered four phases: (1) characterization and numerical modeling of the cyclic plastic behavior of Electrolytic Tough Pitch copper using the Chaboche constitutive model; (2) generation of a finite element model including large deformations and the inelastic constitutive model of the material; (3) numerical design of the device using the response surface methodology; and (4) design and testing of two different proof-of-concept devices subjected to both, a unidirectional and a bi-directional displacement load path. The cyclic response of the device showed significant energy dissipation capacity even for very small deformations. It was also capable of sustaining 20 large cycles prior to failure. The numerical model used was capable of representing the cyclic response characteristics of the damper very accurately, and the proposed design process was validated using the measured response of the tested devices. It is concluded that annealed copper is an interesting material for energy dissipation and that the design procedure developed proved to be cost-effective and applicable to other metallic dampers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Briones and de la Llera [74] presented a copper-based bidirectional energy dissipation damper where the device cyclic response demonstrated that the damper has a good deformation capacity to dissipate energy before failure.”
From Invited Review: Recent developments in vibration control of building and bridge structures (2017) · cites this paper as [74]
Citations
Cites
Minimum Design Loads for Buildings and Other Structures
American Society of Civil Engineers (2003) · American Society of Civil Engineers eBooks · doi:10.1061/9780784406243 · Cited by 3,879
Metal Fatigue in Engineering (1980)
Fuchs, H. O., Stephens, R. I., & Saunders, H. (1981) · Journal of Engineering Materials and Technology · doi:10.1115/1.3225026 · Cited by 1,933
Time-independent constitutive theories for cyclic plasticity
Chaboche, J. L. (1986) · International Journal of Plasticity · doi:10.1016/0749-6419(86)90010-0 · Cited by 1,858
A review of some plasticity and viscoplasticity constitutive theories
Chaboche, J. L. (2008) · International Journal of Plasticity · doi:10.1016/j.ijplas.2008.03.009 · Cited by 1,781
(1993) · Choice Reviews Online · doi:10.5860/choice.31-0986 · Cited by 1,540
Stephens, R. I., & Fuchs, H. O. (1980) · Wiley eBooks · Cited by 1,377
Fatigue: A complex subject—Some simple approximations
Manson, S. S. (1965) · Experimental Mechanics · doi:10.1007/bf02321056 · Cited by 1,372
On the description of anisotropic workhardening
Mróz, Z. (1967) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(67)90030-0 · Cited by 1,365
Supplemental energy dissipation: state-of-the-art and state-of-the-practice
Soong, T. T., & Spencer, B. F. (2002) · Engineering Structures · doi:10.1016/s0141-0296(01)00092-x · Cited by 1,220
Applications of shape memory alloys in civil structures
Song, G., Ma, N., & Li, H.-N. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2005.12.010 · Cited by 791
Research works printed but not linked: 6
- Kobori T, Yamada T, Takenaka Y, Maeda Y, Nishimura I. Effect of dynamic tuned connector on reduction of seismic response – application to adjacent office buildings. In: Proceedings of ninth world conference on earthquake engineering; 1988. p. 773–8 (V).
- Kobori T, Miura Y, Fukuzawa E, Yamada T, Arita T, Takenaka Y, et al. Development and application of hysteresis steel dampers. In: Tenth world conference on earthquake engineering; 1992. p. 2341–6.
- Chiarotto D, Tomaselli F, Baldo P, Castellano MG, Infanti S. Seismic protection of Tuy Medio railway viaducts: design and shaking table tests of the seismic devices. In: 13th World conference on earthquake engineering, Vancouver, B.C., Canada; 2004.
- Moroni MO, Herrera R, Sarrazin M. Testing of Cu-based SMA seismic energy dissipation devices. In: 14th World conference on earthquake engineering. International Association for Earthquake Engineering; 2008.
- ASM Metals Handbook, vol. 2. American Society of Metals; 2004.
- ASM Metals Handbook, vol. 9. American Society of Metals; 2004.
Cited by
State-of-the-Art Review of Metallic Dampers: Testing, Development and Implementation
Javanmardi, A., Ibrahim, Z., Ghaedi, K., Benisi Ghadim, H., & Hanif, M. U. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09329-9 · Cited by 209
Invited Review: Recent developments in vibration control of building and bridge structures
Ghaedi, K., Ibrahim, Z., Adeli, H., & Javanmardi, A. (2017) · Journal of Vibroengineering · doi:10.21595/jve.2017.18900 · Cited by 146
“Briones and de la Llera [74] presented a copper-based”
BackgroundDevelopment and cyclic testing of an innovative shear-bending combined metallic damper
Li, Z., Shu, G., & Huang, Z. Y. (2019) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2019.03.008 · Cited by 79
Experimental evaluation and numerical simulation of low-yield-point steel shear panel dampers
Yao, Z., Wang, W., & Zhu, Y. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.112860 · Cited by 78
Deng, K., Pan, P., Su, Y., & Xue, Y. (2015) · Engineering Structures · doi:10.1016/j.engstruct.2015.03.006 · Cited by 68
Metadata
- Authors
- Briones, B., & de la Llera, J. C.
- Affiliations
- Pontificia Universidad Católica de Chile (CL)
- Venue
- Engineering Structures
- Publisher
- Elsevier BV
- Published
- 2014-11
- Volume
- 79
- Pages
- 309-321
- ISSN
- 0141-0296 (ISSN-L)
- OpenAlex
- W2070298433
- Cited by
- 27
- References
- 40
- Citations by year
- 2025: 6 · 2024: 6 · 2023: 3 · 2022: 1 · 2021: 3 · 2019: 2 · 2018: 3 · 2017: 1 · 2015: 1 · 2014: 1
- FWCI
- 1.92
- Type
- journal article
- Language
- en
- Open access
- green
- americanae.aecid.es
- Licence
- cc-by-nc-nd
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Engineering Structures (publishedVersion)
- Americanae (AECID Library) (submittedVersion, cc-by-nc-nd)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, cc-by-nc-nd)
- Funders
- International Copper Association (1110377)
- FONDAP CIGIDEN (15110017)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Seismic Performance and Analysis
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Response to Dynamic Loads
- Keywords
- energy dissipation devices, copper, cyclic plasticity, electrolytic tough pitch copper, numerical modeling, seismic dampers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis, design and testing of an hourglass-shaped copper energy dissipation device. https://app.cochat.ai/papers/10.1016/j.engstruct.2014.07.006
- The paper
- Briones, B., & de la Llera, J. C. (2014). Analysis, design and testing of an hourglass-shaped copper energy dissipation device. Engineering Structures. https://doi.org/10.1016/j.engstruct.2014.07.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
