E. Torroja’s bridge: Tailored experimental setup for SHM of a historical bridge with a reduced number of sensors
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper presents the design of an experimental setup with a reduced number of sensors for the structural health monitoring of the historical bridge of Posadas (Cordoba, Spain), designed by the eminent engineer Eduardo Torroja in 1957. The motivation of this study stems from the need for safeguarding this piece of cultural heritage. In particular, the singularity of this historical construction, a steel–concrete composite typology consisting of a concrete deck slab and inverted bowstring steel trusses, makes continuous in-service condition assessment essential for its maintenance. Nevertheless, the application of existing continuous monitoring systems to such large-scale structures entails considerable investments as well as complex signal processing algorithms. Whereby the optimization of the number of sensors and their location is of the utmost interest. In this line, this work presents the application of an Optimal Sensor Placement (OSP) methodology to tailor an experimental setup for a cost-efficient continuous monitoring of the E. Torroja’s bridge. Due to the fact that most OSP approaches are model-based, it is essential to count on a sufficiently accurate numerical model. To this aim, an extensive vibration-based operational modal analysis is first conducted with a large number of accelerometers. Afterward, a three-dimensional finite element model of the E. Torroja’s bridge is updated on the basis of the experimentally identified dynamic properties with a genetic optimization algorithm. Finally, an optimal sensor placement methodology is utilized to design an experimental setup with a limited number of sensors for long-term monitoring purposes. The results demonstrate that few sensors are needed to accurately assess the main resonant frequencies and mode shapes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Monitoring historical masonry structures with operational modal analysis: Two case studies
Ramos, L. F., Marques, L., Lourenço, P. B., De Roeck, G., Campos-Costa, A., & Roque, J. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.01.011 · Cited by 443
Cited by
Review of finite element model updating methods for structural applications
Ereiz, S., Duvnjak, I., & Fernando Jiménez-Alonso, J. (2022) · Structures · doi:10.1016/j.istruc.2022.05.041 · Cited by 371
Optimal Sensor Placement for Structural Health Monitoring: A Comprehensive Review
Sun, Z., Mahmoodian, M., Sidiq, A., Jayasinghe, S., Shahrivar, F., & Setunge, S. (2025) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan14020022 · Cited by 53
Sivasuriyan, A., Vijayan, D. S., LeemaRose, A., Revathy, J., Gayathri Monicka, S., Adithya, U. R., & Jebasingh Daniel, J. (2021) · Advances in Materials Science and Engineering · doi:10.1155/2021/2615029 · Cited by 29
Retracted
Metadata
- Authors
- Pachón, P., Castro, R., García-Macías, E., Compan, V., & Puertas, E.
- Venue
- Engineering Structures
- Publisher
- Elsevier BV
- Published
- 2018-05
- Volume
- 162
- Pages
- 11-21
- ISSN
- 0141-0296 (ISSN-L)
- OpenAlex
- W2792364330
- Cited by
- 72
- References
- 1
- FWCI
- 6.74
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.