Experimental investigation of bond behavior of mild steel reinforcement in UHPC
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Abstract Ultra-High Performance Concrete (UHPC) is a relatively new class of advanced cementitious composite material, which exhibits high compressive and tensile strengths. The discrete steel fiber reinforcement included in UHPC allows the material to maintain a tensile capacity beyond cracking of the cementitious matrix. The bond behavior of deformed reinforcing bar in UHPC is investigated in this study by conducting pull out tests and beam tests with lap splices. The rebar used for these tests are #4 (M13), #5 (M16) A615 grade 60 bars and # 6(M19), #7 (M22) A615 grade 80 bars. The embedment length and side cover for the pull out tests were varied from 6db to 8db (db = diameter of the rebar) and 1db to 3.5db, respectively. The beam tests were conducted under four-point loading and the clear cover for these tests was varied from 1db to 3db. The rebar for all beam specimens were spliced at mid-span for a length of 8db. The beam specimens were instrumented to capture the strains at different points along the splice length. 16 pull out and 12 beam tests were completed and the effect of embedment length, concrete cover, bar size and bar type on the bond strength were investigated. This paper presents the details of this experimental investigation and adds significant new data on the bond stress distribution along the development length. It was found that the development length of embedded reinforcement in UHPC can be significantly reduced when compared to normal concrete.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Their results showed that the extension length of embedded rebar in UHPC can be significantly reduced compared with that of ordinary concrete.”
From Bond-Slip Performances of Ultra-High Performance Concrete Steel Tube Columns Made of a Large-Diameter Steel Tube with Internally Welded Steel Bars (2023) · cites this paper as [39]
Citations
Cites
Material Property Characterization of Ultra-High Performance Concrete
Graybeal, B. A. (2006) · ROSA P · Cited by 1,010
Ultra-High Performance Concrete: A State-of-the-Art Report for the Bridge Community
Russell, H. G., & Graybeal, B. A. (2013) · ROSA P · Cited by 616
Bond Performance of Reinforcing Bars Embedded in High-Strength Concrete
Azizinamini, A., Stark, M. W., Roller, J. J., & Ghosh, S. K. (1993) · ACI Structural Journal · doi:10.14359/3951 · Cited by 189
Alkaysi, M., & El‐Tawil, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.091 · Cited by 173
Bond of Reinforcement in Ultra-High-Performance Concrete
Yuan, J., & Graybeal, B. A. (2015) · ACI Structural Journal · doi:10.14359/51687912 · Cited by 147
Bond behaviour of reinforcing bars in UHPFRC: Experimental investigation
Marchand, P., Baby, F., Khadour, A., Battesti, T., Rivillon, P., Quiertant, M., Nguyen, H.-H., Généreux, G., Deveaud, J.-P., Simon, A., et al. (2015) · Materials and Structures · doi:10.1617/s11527-015-0628-0 · Cited by 140
Lagier, F., Massicotte, B., & Charron, J. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.004 · Cited by 100
Development Length of High-Strength Steel Rebar in Ultrahigh Performance Concrete
Saleem, M. A., Mirmiran, A., Xia, J., & Mackie, K. R. (2012) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000571 · Cited by 95
Research works printed but not linked: 1
- Fehling E, Lorenz P, Leutbecher T. Experimental investigations on anchorage of rebars in UHPC. In: Proceedings of Hipermat 2012 3rd international symposium on UHPC and nanotechnology for high performance construction materials, Kassel, Germany; 2012.
Cited by
Khaksefidi, S., Ghalehnovi, M., & de Brito, J. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101592 · Cited by 203
Qi, J., Zhao, C., John, Z., Wang, J., & Liu, J. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.113290 · Cited by 106
Impact of fiber distribution and cyclic loading on the bond behavior of steel-reinforced UHPC
Shao, Y., Tich, K. L., Boaro, S. B., & Billington, S. L. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104338 · Cited by 87
Farouk, A., Zhu, J., Ding, J., & Haruna, S. I. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128360 · Cited by 70
Hu, X., Xue, W., & Lv, Y. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.117468 · Cited by 67
Bond-slip behavior of steel reinforced UHPC under flexure: Experiment and prediction
Shao, Y., & Ostertag, C. P. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104724 · Cited by 58
Effects of the tensile properties of UHPC on the bond behavior
Soliman, A. A., Heard, W. F., Williams, B. A., & Ranade, R. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131990 · Cited by 48
Xu, T., Bian, X., Liu, Z., Yang, J., & Zhang, Z. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.106122 · Cited by 43
Ke, L., Ma, K., Chen, Z., Li, Y., Chen, G. M., & Feng, Z. (2024) · Structures · doi:10.1016/j.istruc.2024.106551 · Cited by 44
Han, B., & Yuan, H. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129088 · Cited by 41
Jiang, H., Dong, X., Fang, Z., Xiao, J., & Chen, Y. (2020) · Journal of Bridge Engineering · doi:10.1061/(asce)be.1943-5592.0001644 · Cited by 40
Yoo, D., Soleimani-Dashtaki, S., Oh, T., Chun, B., Banthia, N., Lee, S.-J., & Yoon, Y. (2024) · Developments in the Built Environment · doi:10.1016/j.dibe.2024.100343 · Cited by 35
Fang, Z., Jiang, H., Xiao, J., Dong, X., & Shao, T. (2020) · Structures · doi:10.1016/j.istruc.2020.11.038 · Cited by 32
Huang, Y., & Yu, Z. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.116253 · Cited by 32
Gao, X., & Wang, J. (2021) · Materials and Structures · doi:10.1617/s11527-021-01686-x · Cited by 31
Li, Y., Li, S., Qiao, J., & Pan, J. (2023) · Structures · doi:10.1016/j.istruc.2023.02.012 · Cited by 31
Experimental study of bond behavior between concrete-filled steel tube and UHPC-encased
Xie, K., Huang, K., Huang, L., & Zhu, T. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.134016 · Cited by 29
Vatannia, S., Kearsley, E. P., & Mostert, D. (2020) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2020.e00415 · Cited by 29
“The composition of a typical commercial UHPFRC [6,15] widely used in literature [7,16,17] is listed in Table 1.”
BackgroundBond properties between lapped steel rebars and UHPC under direct tension
Hu, X., Xue, W., & Lv, Y. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133761 · Cited by 28
Liang, R., & Huang, Y. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.116354 · Cited by 24
Experimental study on bond behavior of steel bar embedded in thin UHPC
Gao, X., Shen, S., Wan, Y., & Qin, S. W. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108865 · Cited by 24
Gao, X., Wang, M., Guo, J., & Li, H. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108893 · Cited by 23
Research on critical anchorage length of UHPC-CA and HTRB600E high-strength steel bars
Xu, G., Chen, B., Zeng, J. J., Gao, D., & Bao, H. (2022) · Structures · doi:10.1016/j.istruc.2022.05.015 · Cited by 22
Review of Bond-Slip Behavior between Rebar and UHPC: Analysis of the Proposed Models
Huang, Y., & Liu, Y. (2023) · Buildings · doi:10.3390/buildings13051270 · Cited by 20
Effect of Elevated Temperature on the Bond Strength of Prestressing Reinforcement in UHPC
Pokorný, P., Kolísko, J., Čítek, D., & Kostelecká, M. (2020) · Materials · doi:10.3390/ma13214990 · Cited by 20
“The increase of the measured bond stress values for the samples exposed to 200 ◦C compared to the reference group can be explained by a denser microstructure of UHPC [14,33] and correlates well with the average of the compressive strength values as also observed in [39,40,43].”
BackgroundResultWang, Y., Li, S., Gao, C., Cheng, Z., Wang, J., & Hu, Y. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118818 · Cited by 19
Bonding-slip behaviour of steel-concrete interfaces in CFDST members with PBL ribs
Shi, Y., Ren, J.-X., Fan, J.-H., Wang, W.-D., & Wang, H.-C. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118384 · Cited by 15
Deng, N., Zhao, H., Yao, D., & Tang, Z. (2023) · Materials · doi:10.3390/ma16103836 · Cited by 14
“[39] conducted pull-out tests to investigate the effects of rebar length, concrete cover, rebar size, and rebar type on bond strength.”
BackgroundStudy of bond-slip performance of steel tube with UHPC based on acoustic emission parameter analysis
Xie, K., Huang, K., Wang, Q., Huang, L., Zhu, T., & Long, G. (2024) · Structures · doi:10.1016/j.istruc.2024.107828 · Cited by 14
Wu, D., Ding, Y., Su, J., & Li, Z. (2023) · Bulletin of Earthquake Engineering · doi:10.1007/s10518-023-01650-w · Cited by 14
Wu, Z., Deng, M., Jin, M., Wang, X., & Lyu, H. (2025) · Engineering Structures · doi:10.1016/j.engstruct.2025.119840 · Cited by 13
Li, Y., Xue, W., & Jiang, J. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118793 · Cited by 12
Li, Z., Shen, J., Zhu, H., Niu, G., Yang, L. M., & Gu, Z. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.142446 · Cited by 11
Wang, P., You, X., Shi, Q., & Rong, C. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143306 · Cited by 10
Wang, Z., Zhu, J., Wang, J., Zhao, G., Sun, S., & Zhang, J. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.112851 · Cited by 10
Zhao, J.-Z., Ding, R., Tao, M., & Zhuang, L. (2022) · Structures · doi:10.1016/j.istruc.2022.10.068 · Cited by 10
Finite element analysis on non-contact lap splice connections in ultra-high-performance concrete
Sun, X., Ding, T., Xiao, J., Li, S., & Yang, Y. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118771 · Cited by 9
Liu, S., Zheng, W., Tang, W., Hou, X., & Li, S. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138116 · Cited by 9
Matilla, A. L., Ferrández, D., Barrio, M. I. P., & Varum, H. (2025) · Buildings · doi:10.3390/buildings15091539 · Cited by 9
Gao, J., Ma, B., Liu, P., Li, J., & Bao, Z. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.119165 · Cited by 8
Naukhez, K., Sagar, R. V., & Kishen, C. J. (2023) · International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS) · doi:10.21012/fc11.0923102 · Cited by 7
Bond performance of novel NPR rebar-reinforced UHPC under cyclic loading
Lu, B.-L., Wang, J., Rong, X., Chen, L.-B., & Chen, Z. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.140987 · Cited by 7
Wang, D., Shi, Q., Wang, Y., & Kang, S. (2021) · Structural Concrete · doi:10.1002/suco.202000667 · Cited by 7
“Thus, for elastic steel segments, Equation (12) can be re-written as”
BackgroundWang, Z., Zheng, X., Wang, Q., & Wang, Q. (2023) · Buildings · doi:10.3390/buildings13092375 · Cited by 6
Yan, H.-Q., Peng, J., Zhou, S.-R., Qin, Y., Kang, S., & Chen, Y. (2025) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2025.109769 · Cited by 6
Lu, B.-L., Chang, S., Wang, J., Su, B.-D., & Liu, K.-Z. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.140276 · Cited by 6
Xu, R., Li, J., Li, W., & Zhang, W. (2024) · Structural durability & health monitoring · doi:10.32604/sdhm.2024.057513 · Cited by 5
“Bond strength between UHPC and steel is crucial for performance [4,5], ensuring effective load transfer and preventing premature failure [8,21].”
Experimental study on flexural behavior of precast concrete beams in-span joined with UHPC
Xu, Z., Zhou, W., & Lu, G. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.113190 · Cited by 5
Bond behavior of staggered lap and anchored reinforcement in ultra-high performance concrete
Xie, Y., Xiong, E., Wang, S., Zhang, Y., & Taciroğlu, E. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.114329 · Cited by 5
Flexural Noncontact Lap Splices in Ultra-High-Performance Concrete
Hock, J., Mackie, K. R., Apostolakis, G., & Wang, T. (2023) · ACI Structural Journal · doi:10.14359/51739189 · Cited by 5
Elhadary, R., & Bassuoni, M. T. (2023) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-16162 · Cited by 4
Liu, X., Gu, D., Pan, J., & Luković, M. (2025) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2025.111510 · Cited by 3
Retrofitting of Bridge Elements Subjected to Predominantly Axial Load Using UHPC Shell
Farzad, M. (2019) · FIU - Digital Commons (Florida International University) · doi:10.25148/etd.fidc007667 · Cited by 3
Bond behaviour of deformed reinforcing bars in ultrahigh-performance fibre RC
Huang, Y., Zhang, R., Chen, S., & Gu, P. (2023) · Magazine of Concrete Research · doi:10.1680/jmacr.22.00142 · Cited by 2
Rebar Development Length of Reinforced UHPC
Soliman, A., & Ranade, R. (2023) · International Interactive Symposium on Ultra-High Performance Concrete (UHPC) · doi:10.21838/uhpc.16655 · Cited by 2
Sun, Y. B., Jiao, Y., Yang, H., Chen, Y., & Liu, Z. (2025) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-19986 · Cited by 2
Zhao, X., Xu, C.-Z., Rong, X., Wang, J., & Ma, X. (2025) · Materials · doi:10.3390/ma18133182 · Cited by 2
“Ultra-high-performance concrete (UHPC) possesses superior mechanical properties and crack control capabilities, exceptional durability, and good constructability [1–4].”
Numerical analysis on the tensile behavior of innovative SC wall-RC foundation connections
Liao, T., Wang, Y., Yang, Y., Chen, R., Zuo, J., & Han, W. (2025) · Structures · doi:10.1016/j.istruc.2025.108684 · Cited by 1
Zhang, D., Xu, G., Dai, Y., & Wei, Z. (2025) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-20345 · Cited by 1
Zheng, Y., Xie, Y., Wang, K. X., Zhang, Y., & Long, F. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.116833 · Cited by 1
Quasi-Static Cyclic Tests of Precast Columns with Steel Section Reinforced UHPC Connection
Xia, Z., Chen, J., Hu, X., Xia, J., & Li, Z. (2026) · Journal of Structural Engineering · doi:10.1061/jsendh.steng-15936 · Cited by 1
Elhadary, R., Bassuoni, M. T., & Azzam, A. (2024) · Structures · doi:10.1016/j.istruc.2024.106328 · Cited by 1
Shafieifar, M. (2018) · FIU - Digital Commons (Florida International University) · doi:10.25148/etd.fidc007045 · Cited by 1
“Ronanki et al, performed several tests including pull out tests and beam tests with lap splices to evaluate the bond behavior of steel reinforcing bar in UHPC [63].”
MethodElhadary, R. (2023) · Mspace (University of Manitoba) · Cited by 1
Kumar, P. S. S., Sivakandhan, C., Babu, K. V., Pritima, D., Satyanarayana, & Marichamy, S. (2020) · AIP conference proceedings · doi:10.1063/5.0025427
Predicting Bond Strength between Steel Rebar and Ultra-High Performance Concrete Using Random ForestPreprint
Wang, Z., Xiong, F., & Deng, C. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4117125
Bing, F., Xiao, G. Q., Lin, W. L., Chen, Y., & Zhou, Y. (2026) · Structures · doi:10.1016/j.istruc.2026.112343
Sharma, S., Aaleti, S. R., & Okumus, P. (2025) · ACI Structural Journal · doi:10.14359/51746817
Self-citationBond properties of high-strength bars embedded in ultra-high-performance fibre-reinforced concrete
Li, Y., Jia, H., & Qiao, J. (2025) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2025.2594574
Wang, T., Apostolakis, G., & Mackie, K. R. (2025) · Structures · doi:10.1016/j.istruc.2025.110759
Zhang, Y., & Zhong, J. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5958723
Zhang, Y., Ming, Z., Zhao, B., Zhao, W., & zhong, J. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6439400
Simwanda, L., & Awoyera, P. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6498421
State of the Art of Bond Behavior of Lap Spliced Rebars in Ultra-High-Performance Concrete
Xie, L. (2026) · Advances in Engineering Research Possibilities and Challenges · doi:10.63313/aerpc.9086
Zhang, X., & Niu, D. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.146634
An Experimental Investigation of Bond Strength of Ultra-High Performance Concrete
SHARIF, A. (2020) · Research Publication Repository of King Fahd University of Petroleum and Minerals (King Fahd University of Petroleum and Minerals)
Zhang, Y., Zhang, M., Zhao, B., Zhao, W., & Zhong, J. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147330
Zheng, D., Cheng, D., Wang, Q., Li, K., & Wang, L. (2026) · Journal of Testing and Evaluation · doi:10.1520/jte20250205
Bi, F., Zheng, T., Kong, D., Wang, L., Wang, S., 吴童倢, & He, T. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147747
Metadata
- Authors
- Ronanki, V. S., Aaleti, S., & Valentim, D. B.
- Affiliations
- University of Alabama (US)
- Corresponding author
- Aaleti, Sriram
- Venue
- Engineering Structures
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 176
- Pages
- 707-718
- ISSN
- 0141-0296 (ISSN-L)
- OpenAlex
- W2893564811
- Cited by
- 78
- References
- 8
- Citations by year
- 2026: 10 · 2025: 18 · 2024: 14 · 2023: 16 · 2022: 7 · 2021: 5 · 2020: 6 · 2019: 1 · 2018: 1
- FWCI
- 2.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Engineering Structures (publishedVersion)
- Funders
- University of Alabama
- Topics
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete Corrosion and Durability
- Keywords
- ultra-high performance concrete, bond behavior, deformed reinforcing bars, mild steel reinforcement, pull-out test, lap splices, development length, bond stress distribution, concrete cover, embedment length, steel fiber reinforced concrete
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.