The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Microplastics in an agricultural soil following repeated application of three types of sewage sludge: A field study
Open accessAbstract
Microplastics were investigated in an agricultural soil to which three types of sludge were repeatedly applied: fresh municipal sludge (FSS1), fresh mixed sludge (mainly industrial sludge) (FSS2), and dry heat-treated municipal sludge (DSS). The percentages of microplastics <1.0 mm were 24.3 and 28.7-59.1 % in unamended and amended soils, respectively. Particles of this size accounted for 47.1-60.0 % of microplastics in different sludges and polymers of particle size <100 μm occurred in all soil samples and sludges examined. Fibers were the commonest microplastic type, ranging from 66.7 to 82.5 % in soil and 89.4-97.2 % in sludges. Polyester (PES) and polypropylene (PP) accounted for ~80 % of the total microplastics found in soil and poly-(styrene:acrylate) (PS-AC) microspheres were found in all sludge-amended soil samples examined. There was also a pronounced weathering effect on the surfaces of the microplastics in soil. Nine years of repeated sludge application led to the accumulation of microplastics in the soil. The abundance of microplastics was significantly higher in the municipal sludge (149.2 ± 52.5 particles kg-1) than in the mixed (68.6 ± 21.5 particles kg-1) or dried (73.1 ± 15.4 particles kg-1) sludge and this was related to the microplastic abundance in the sludges. This field study confirms that sludges are drivers of soil microplastic pollution and measures are required to minimize the inputs of microplastics to agricultural land.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthetic fibers as an indicator of land application of sludge
Zubris, K. A. V., & Richards, B. K. (2005) · Environmental Pollution · doi:10.1016/j.envpol.2005.04.013 · Cited by 723
Sørensen, L., Groven, A. S., Hovsbakken, I. A., Del Puerto, O., Krause, D. F., Sarno, A., & Booth, A. M. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143170 · Cited by 278
Cited by
Luo, Y., Li, L., Feng, Y., Li, R., Yang, J., Peijnenburg, W. J. G. M., & Tu, C. (2022) · Nature Nanotechnology · doi:10.1038/s41565-021-01063-3 · Cited by 374
Self-citationKrishnan, R. Y., Manikandan, S., Subbaiya, R., Karmegam, N., Kim, W., & Govarthanan, M. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.159681 · Cited by 272
Cohen, N., & Radian, A. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.2c05026 · Cited by 60
Metadata
- Authors
- Yang, J., Li, L., Li, R., Xu, L., Shen, Y., Li, S., Tu, C., Wu, L., Christie, P., & Luo, Y.
- Venue
- Environmental Pollution
- Publisher
- Elsevier BV
- Published
- 2021-11
- Volume
- 289
- Pages
- 117943
- ISSN
- 0269-7491 (ISSN-L)
- OpenAlex
- W3191711426
- Cited by
- 178
- References
- 2
- FWCI
- 6.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.