The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
RETRACTED: Novel 1-butyl-3-methylimidazolium bromide impregnated chitosan hydrogel beads nanostructure as an efficient nanobio-adsorbent for cationic dye removal: Kinetic study
Abstract
In the present study, a novel 1-butyl-3-methylimidazolium bromide (BmImBr) impregnated chitosan beads were prepared and characterized using different methods, including XRD, FT-IR, EDX, SEM and BET. The FTIR analysis revealed that the BmImBr was successfully conjugated with the chitosan in the beads structure. The prepared beads were used as an efficient sorbent for the fast removal of methylene blue, as cationic dye model, from aqueous solution, whereas just 25 min was required to reach 86% removal efficiency. The increasing of BmImBr amount improved the adsorption performance of prepared beads. Also, it was found that the dye can be higher adsorbed on the beads surface by increasing the sorbent dosage and pH of solution, while the optimum dosage and pH were obtained 3 mg/L and 11, respectively. The kinetic study showed that the MB adsorption onto the CS-BmImBr beads follows the pseudo-fist order model and the intrinsic penetration controls the adsorption process.The properties of prepared chitosan- BmImBr IL conjugation confirmed that it can be exploited as an efficient adsorbent in the wastewater treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Applications of ionic liquids in the chemical industry
Plechkova, N. V., & Seddon, K. R. (2008) · Chem. Soc. Rev. · doi:10.1039/b006677j · Cited by 5,686
Review of second-order models for adsorption systems
HO, Y. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.12.043 · Cited by 4,120
Crini, G., & Badot, P.-M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.11.001 · Cited by 2,350
Adsorption of dyes and heavy metal ions by chitosan composites: A review
Wan Ngah, W. S., Teong, L. C., & Hanafiah, M. A. K. M. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.11.004 · Cited by 2,045
Ionic liquids synthesis and applications: An overview
Singh, S. K., & Savoy, A. W. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.112038 · Cited by 1,233
Mohan, D., & Singh, K. P. (2002) · Water Research · doi:10.1016/s0043-1354(01)00447-x · Cited by 1,189
A review of ionic liquids: Applications towards catalytic organic transformations
Vekariya, R. L. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.11.123 · Cited by 1,021
Gerente, C., Lee, V. K. C., Cloirec, P. L., & McKay, G. (2007) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380600729089 · Cited by 781
Characterization of micro- and mesoporous solids by physisorption methods and pore-size analysis
Storck, S., Bretinger, H., & Maier, W. F. (1998) · Applied Catalysis A: General · doi:10.1016/s0926-860x(98)00164-1 · Cited by 602
Karimi-Maleh, H., Ayati, A., Ghanbari, S., Orooji, Y., Tanhaei, B., Karimi, F., Alizadeh, M., Rouhi, J., Fu, L., & Sillanpää, M. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.115062 · Cited by 569
Self-citation
Cited by
Rathi, B. S., & Kumar, P. S. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.116995 · Cited by 723
Khan, M. D., Singh, A., Khan, M. Z., Tabraiz, S., & Sheikh, J. (2023) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2023.103579 · Cited by 384
A review on magnetic sensors for monitoring of hazardous pollutants in water resources
Hojjati-Najafabadi, A., Mansoorianfar, M., Liang, T., Shahin, K., & Karimi-Maleh, H. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153844 · Cited by 367
Self-citationRetractedKarimi, F., Ayati, A., Tanhaei, B., Sanati, A. L., Afshar, S., Kardan, A., Dabirifar, Z., & Karaman, C. (2022) · Environmental Research · doi:10.1016/j.envres.2021.111753 · Cited by 294
Self-citationProbing and Manipulating Noncovalent Interactions in Functional Polymeric Systems
Chen, J., Peng, Q., Peng, X., Zhang, H., & Zeng, H. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00215 · Cited by 272
Varsha, M., Senthil Kumar, P., & Senthil Rathi, B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.132270 · Cited by 262
Chen, Y.-G., He, X.-L.-S., Huang, J.-H., Luo, R., Ge, H.-Z., Wołowicz, A., Wawrzkiewicz, M., Gładysz-Płaska, A., Li, B., Yu, Q.-X., et al. (2021) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2021.112336 · Cited by 192
Metadata
- Authors
- Karimi-Maleh, H., Ranjbari, S., Tanhaei, B., Ayati, A., Orooji, Y., Alizadeh, M., Karimi, F., Salmanpour, S., Rouhi, J., Sillanpää, M., & Sen, F.
- Venue
- Environmental Research
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 195
- Pages
- 110809
- ISSN
- 0013-9351 (ISSN-L)
- OpenAlex
- W3121254951
- Cited by
- 294
- References
- 40
- FWCI
- 19.14
- Type
- journal article
- Language
- en
- Status
- Retracted
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.