The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Biomass-derived activated carbon material from native European deciduous trees as an inexpensive and sustainable energy material for supercapacitor application
Abstract
Abstract Activated carbons are one of the possible electrode materials for supercapacitors (SCs), which are widely used in commercial applications. Herein, we reported the synthesis of a novel activated carbon derived through a cavitation process from the mixture of native European deciduous trees, Birch, Fagaceae, and Carpinus betulus (commonly known as European hornbeam), which was employed as the electrode material in SC. From the morphological and structural characterization, we observed that the prepared sample is a desirable carbon with good porosity and high specific surface area of about 614 m2 g−1. The electrochemical properties of the synthesized material were evaluated with a three-electrode configuration in 1.0 M H2SO4 electrolyte. It was found that in device mode, the carbon material delivers a specific capacitance of 24 F g−1 at 0.25 A g−1 with excellent cycling stability of over 10000 consecutive charge/discharge cycles. Thus, our studies demonstrate the facile synthesis of biomass-derived carbon and its application as a versatile electrode material for SC applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Jayaraman, T., Murthy, A. P., Elakkiya, V., Chandrasekaran, S., Nithyadharseni, P., Khan, Z., Senthil, R. A., Shanker, R., Raghavender, M., Kuppusami, P., et al. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.02.029 · Cited by 183
Cited by
Chakraborty, R., K, V., Pradhan, M., & Nayak, A. K. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta10269a · Cited by 314
Metadata
- Authors
- Jain, A., Ghosh, M., Krajewski, M., Kurungot, S., & Michalska, M.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 34
- Pages
- 102178
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3110691302
- Cited by
- 216
- References
- 2
- FWCI
- 17.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.