The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Practical evaluation of energy densities for sulfide solid-state batteries
Abstract
Abstract All-solid-state Lithium (ion) batteries (ASSLBs) have been widely accepted as the key technology for next-generation energy storage devices, for which sulfide solid electrolyte (SSE) is most promising due to its high ionic conductivity and good mechanical property. For the development of sulfide ASSLBs, their energy densities with different electrode systems at cell level should be calculated as first priority, to rule out exaggerated/misleading reports and enable dedicated solutions to specific material systems with clear energy-density targets/applications. Herein, we evaluate the gravimetric/volumetric energy densities of sulfide ASSBs with practical parameters in a commercialized pouch cell for 8 common cathode/anode systems. The typical spacial distribution modes of solid electrolyte (SE) in electrodes are all considered to further precisely evaluate their effects on energy densities. Results show that for LiCoO2/SSE (50 μm)/Li ASSLB, its gravimetric (volumetric) energy density ranges in 410–280 Wh kg−1 (820-560 Wh L−1), as active material content varies from 96.5 to 67.5 wt%. By providing calculation paradigms of energy densities with practical conditions and reasonable assumptions, this study aims to present an unambiguous understanding in energy density predictions of sulfide ASSBs with real-world conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Cited by
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries
Li, X., Liang, J., Yang, X., Adair, K. R., Wang, C., Zhao, F., & Sun, X. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03828k · Cited by 755
A comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries
Ren, D., Hsu, H., Li, R., Feng, X., Guo, D., Han, X., Lu, L., He, X., Gao, S., Hou, J., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100034 · Cited by 489
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Prospects of halide-based all-solid-state batteries: From material design to practical application
Wang, C., Liang, J., Kim, J. T., & Sun, X. (2022) · Science Advances · doi:10.1126/sciadv.adc9516 · Cited by 366
Metadata
- Authors
- Liu, L., Xu, J., Wang, S., Wu, F., Li, H., & Chen, L.
- Venue
- eTransportation
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 1
- Pages
- 100010
- ISSN
- 2590-1168 (ISSN-L)
- OpenAlex
- W2965688420
- Cited by
- 162
- References
- 1
- FWCI
- 6.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Practical evaluation of energy densities for sulfide solid-state batteries. https://app.cochat.ai/papers/10.1016/j.etran.2019.100010
- The paper
- Liu, L., Xu, J., Wang, S., Wu, F., Li, H., & Chen, L. (2019). Practical evaluation of energy densities for sulfide solid-state batteries. eTransportation. https://doi.org/10.1016/j.etran.2019.100010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.