The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Effect of crystalline forms (α′ and α) of poly(lactic acid) on its mechanical, thermo-mechanical, heat deflection temperature and creep properties
Abstract
Abstract In this paper the effect of crystallinity and crystalline forms (ratio of the less ordered α′ and the more ordered α crystalline forms) of injection moulded Poly(Lactic Acid) (PLA) was analysed on the mechanical, thermo-mechanical, Heat Deflection Temperature (HDT) and creep properties. The injection moulded PLA specimens were post-production annealed in a heat chamber at 80 °C crystallization temperature (T c ) for 0–60 min to develop various crystallinity as well as at 80–140 °C T c for one hour to develop various ratios of α′ and α crystal forms with the possible maximum crystallinity. It was demonstrated that not only crystallinity, but also the ratio of the crystalline forms of α′ and α significantly influences the application-wise properties like storage modulus and thus HDT as well as tensile, flexural, impact properties and finally creep characteristics. In most cases better properties (higher HDT, storage modulus, mechanical properties, and creep resistance) could be reached by increasing the α to α′ crystalline form ratio in the PLA specimens.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
Cited by
Bhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 355
Benwood, C., Anstey, A., Andrzejewski, J., Misra, M., & Mohanty, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b00129 · Cited by 262
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Shahnooshi, M., Schneider, K., Javadi, A., & Altstädt, V. (2023) · Polymer · doi:10.1016/j.polymer.2023.126254 · Cited by 6
Metadata
- Authors
- Tábi, T., Hajba, S., & Kovács, J. G.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2016-09
- Volume
- 82
- Pages
- 232-243
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W2477242317
- Cited by
- 175
- References
- 6
- FWCI
- 5.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of crystalline forms (α′ and α) of poly(lactic acid) on its mechanical, thermo-mechanical, heat deflection temperature and creep properties. https://app.cochat.ai/papers/10.1016/j.eurpolymj.2016.07.024
- The paper
- Tábi, T., Hajba, S., & Kovács, J. G. (2016). Effect of crystalline forms (α′ and α) of poly(lactic acid) on its mechanical, thermo-mechanical, heat deflection temperature and creep properties. European Polymer Journal. https://doi.org/10.1016/j.eurpolymj.2016.07.024
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.