3D printing of a high protein yoghurt-based gel: Effect of protein enrichment and gelatine on physical and sensory properties
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The potential application of 3D printing technology in creating protein-rich desserts with multisensory design was investigated. Yoghurt-gel inks were formulated by varying the concentration of gelatine and whey protein isolate (WPI). Assessment of rheological and textural properties prior to printing, showed that an increase of gelatine concentration from 7.5 to 12.5% w/w increased the yield stress, storage modulus, loss modulus, firmness, and resilience of yoghurt gels. Addition of 12% WPI reduced these effects; creating softer gels with reduced resilience. However, these gels showed stable shape after printing, especially in formulations with higher gelatine concentrations. The changes in textural properties caused by the extrusion process need to be considered when designing yoghurt gels, as a significant reduction in firmness and resilience and an increase in adhesiveness were observed after 3D printing. The more stable and well-shaped 3D printed yoghurt gels were obtained by the combined effect of WPI and gelatine which provided a good balance of appearance, taste, flavour, and mouthfeel attributes evaluated by a trained sensory panel. A consumer study performed with thirty healthy adults showed the potential to improve sensory acceptance through the creation of multisensory layered design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flint, A., Raben, A., Blundell, J., & Astrup, A. (2000) · International Journal of Obesity · doi:10.1038/sj.ijo.0801083 · Cited by 2,238
Hydrocolloids as thickening and gelling agents in food: a critical review
Saha, D., & Bhattacharya, S. (2010) · Journal of Food Science and Technology · doi:10.1007/s13197-010-0162-6 · Cited by 1,356 · cited 1×
“Gelatine, along with pectin, carra-geenan, agar, gellan, and alginate are commonly used due to their gel-ling ability (Saha & Bhattacharya, 2010).”
BackgroundThe “majority illusion” in social networks
Lerman, K., Yan, X., & Wu, X.-Z. (2016) · PLOS ONE · doi:10.1371/journal.pone.0147617 · Cited by 669
Impact of macronutrients printability and 3D-printer parameters on 3D-food printing: a review
Pérez, B., Nykvist, H., Brøgger, A. F., Larsen, M. B., & Falkeborg, M. F. (2019) · Food Chemistry · doi:10.1016/j.foodchem.2019.02.090 · Cited by 205
Consumption Simulations Induce Salivation to Food Cues
Keesman, M., Aarts, H., Vermeent, S., Häfner, M., & Papies, E. K. (2016) · PLOS ONE · doi:10.1371/journal.pone.0165449 · Cited by 89 · cited 1×
“Additionally, desire to eat and degree of salivation were evaluated as indicators of appetitive response (Barkeling, Rossner, & Sjoberg, 1995; Keesman, Aarts, Vermeent, H ¨ afner, & Papies, 2016).”
Background
Cited by
Outrequin, T. C. R., Gamonpilas, C., Siriwatwechakul, W., & Sreearunothai, P. (2023) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2022.111371 · Cited by 113
Abedini, A., Sohrabvandi, S., Sadighara, P., Hosseini, H., Farhoodi, M., Assadpour, E., Alizadeh Sani, M., Zhang, F., Seyyedi-Mansour, S., & Jafari, S. M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103181 · Cited by 71
A review on 3D printable food materials: types and development trends
Li, G., Hu, L., Liu, J., Huang, J., Yuan, C., Takaki, K., & Hu, Y. (2022) · International Journal of Food Science & Technology · doi:10.1111/ijfs.15391 · Cited by 60
Barekat, S., & Ubeyitogullari, A. (2025) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2025.112640 · Cited by 19
3D Printing of Materials and Printing Parameters with Animal Resources: A Review
Jeon, E. Y., Kim, Y., Yun, H.-J., Kim, B.-K., & Choi, Y.-S. (2024) · Food Science of Animal Resources · doi:10.5851/kosfa.2023.e73 · Cited by 19
Metadata
- Authors
- Riantiningtyas, R. R., Sager, V. F., Chow, C. Y., Thybo, C. D., Bredie, W. L. P., & Ahrné, L.
- Venue
- Food Research International
- Publisher
- Elsevier BV
- Published
- 2021-09
- Volume
- 147
- Pages
- 110517
- ISSN
- 0963-9969 (ISSN-L)
- OpenAlex
- W3168360024
- Cited by
- 77
- References
- 5
- FWCI
- 3.61
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printing of a high protein yoghurt-based gel: Effect of protein enrichment and gelatine on physical and sensory properties. https://app.cochat.ai/papers/10.1016/j.foodres.2021.110517
- The paper
- Riantiningtyas, R. R., Sager, V. F., Chow, C. Y., Thybo, C. D., Bredie, W. L. P., & Ahrné, L. (2021). 3D printing of a high protein yoghurt-based gel: Effect of protein enrichment and gelatine on physical and sensory properties. Food Research International. https://doi.org/10.1016/j.foodres.2021.110517
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.