CoChat

A technical and environmental analysis of co-combustion of coal and biomass in fluidised bed technologies

Open access
McIlveen-Wright, D.R., Huang, Y., Rezvani, S., Wang, Y. · 2007 · Fuel
Cited by 121

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

The use of biomass, which is considered to produce no net CO2 emissions in its life cycle, can reduce the effective CO2 emissions of a coal-fired power generation system, when co-fired with the coal, but may also reduce system efficiency.The technical and environmental analysis of fluidised bed technologies, using the ECLIPSE suite of process simulation software, is the subject of this study. System efficiencies for generating electricity are evaluated and compared for the different technologies and system scales.Several technologies could be applied to the co-combustion of biomass or waste and coal. The assessment studies here examine the potential for co-combustion of (a) a 600 MWe pulverised fuel (PF) power plant (as a reference system), (i) co-firing coal with straw and sewage sludge and (ii) using straw derived fuel gas as return fuel; (b) a 350 MWe pressurised fluidised bed combustion (PFBC) system co-firing coal with sewage sludge; (c) 250 MWe and 125 MWe circulating fluidised bed combustion (CFBC) plants co-firing coal with straw and sewage sludge; (d) 25 MWe CFBC systems co-firing low and high sulphur content coal with straw, wood and woody matter pressed from olive stones (WPOS); (e) 12 MWe CFBC co-firing low and high sulphur content coal with straw or wood; and (f) 12 MWe bubbling fluidised bed combustion (BFBC), also co-firing low and high sulphur content coal with straw or wood.In the large systems the use of both straw and sewage sludge resulted in a small reduction in efficiency (compared with systems using only coal as fuel).In the small-scale systems the high moisture content of the wood chips chosen caused a significant efficiency reduction.Net CO2 emissions are reduced when biomass is used, and these are compared for the different types and scales of fluidised bed technologies. NOx emissions were affected by a number of factors, such as bed temperature, amount of sorbent used for SO2 capture and HCl emitted.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.fuel.2007.02.011

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 121

Metadata

Authors
McIlveen-Wright, D. R., Huang, Y., Rezvani, S., & Wang, Y.
Venue
Fuel
Publisher
Elsevier BV
Published
2007-09
Volume
86
Issue
14
Pages
2032-2042
ISSN
0016-2361 (ISSN-L)
OpenAlex
W2025754883
Cited by
121
References
1
FWCI
5.26
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.