The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Fuels from bio-oils: Bio-oil production from different residual sources, characterization and thermal conditioning
Open accessAbstract
Abstract Bio-oils from different residual biomass raw materials (pine wood, mesquite wood and wheat shell) were produced by means of conventional pyrolysis at a temperature of 550 °C during 60 min. Bio-oils were separated from gases, tar and char, to show yields between about 30 wt.% and 45 wt.%, and fractionated into water- and ether-soluble fractions in order to know their compositions. Gas chromatography–mass spectrometry was used to identify compounds and complemented with elemental analysis and Conradson carbon residue (CCR), together with water content, density and pH assessments. The composition of the bio-oils varied according to the source biomass. Compounds were considered in eleven main groups: acids, esters, linear aldehydes and ketones, cyclic ketones, furans, alcohols and sugars, phenols, other oxygenated cyclic compounds, hydrocarbons, ethers and nitrogen compounds. The physicochemical properties of bio-oils suggested that it is necessary to upgrade them before co-processing in conventional refining units such as those of catalytic cracking of hydrocarbons. Thermal pre-treatments were conducted with the aim of reducing the CCR of the bio-oils, resulting in a significant average 70% reduction. The concentration of coke precursor phenolic compounds, mainly phenolic ethers, was reduced between 7% and 25%. Another important consequence was the increase in the effective hydrogen index of the mixture, suggesting higher processability in FCC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
Review of biomass pyrolysis oil properties and upgrading research
Zhang, Q., Chang, J., Wang, T., & Xu, Y. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.010 · Cited by 1,472
The conversion of methanol and other O-compounds to hydrocarbons over zeolite catalysts
CHANG, C. (1977) · Journal of Catalysis · doi:10.1016/0021-9517(77)90172-5 · Cited by 1,363
Fuel Oil Quality of Biomass Pyrolysis OilsState of the Art for the End Users
Oasmaa, A., & Czernik, S. (1999) · Energy & Fuels · doi:10.1021/ef980272b · Cited by 805
The influence of temperature and heating rate on the slow pyrolysis of biomass
Williams, P. T., & Besler, S. (1996) · Renewable Energy · doi:10.1016/0960-1481(96)00006-7 · Cited by 583
CORMA, A., HUBER, G., SAUVANAUD, L., & OCONNOR, P. (2007) · Journal of Catalysis · doi:10.1016/j.jcat.2007.01.023 · Cited by 554
Characterization of bio-oils in chemical families
Garcia-Perez, M., Chaala, A., Pakdel, H., Kretschmer, D., & Roy, C. (2007) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.02.006 · Cited by 498
Catalysis in thermal biomass conversion
Bridgwater, A. V. (1994) · Applied Catalysis A: General · doi:10.1016/0926-860x(94)80278-5 · Cited by 472
Cited by
Agro-industrial lignocellulosic biomass a key to unlock the future bio-energy: A brief review
Anwar, Z., Gulfraz, M., & Irshad, M. (2014) · Journal of Radiation Research and Applied Sciences · doi:10.1016/j.jrras.2014.02.003 · Cited by 849
Kabir, G., & Hameed, B. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.001 · Cited by 591
A Technological Overview of Biogas Production from Biowaste
Achinas, S., Achinas, V., & Euverink, G. J. W. (2017) · Engineering · doi:10.1016/j.eng.2017.03.002 · Cited by 586
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Volatile production from pyrolysis of cellulose, hemicellulose and lignin
Zhao, C., Jiang, E., & Chen, A. (2017) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.08.004 · Cited by 458
Metadata
- Authors
- Bertero, M., de la Puente, G., & Sedran, U.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2012-05
- Volume
- 95
- Pages
- 263-271
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W1987657133
- Cited by
- 295
- References
- 35
- FWCI
- 9.30
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fuels from bio-oils: Bio-oil production from different residual sources, characterization and thermal conditioning. https://app.cochat.ai/papers/10.1016/j.fuel.2011.08.041
- The paper
- Bertero, M., de la Puente, G., & Sedran, U. (2012). Fuels from bio-oils: Bio-oil production from different residual sources, characterization and thermal conditioning. Fuel. https://doi.org/10.1016/j.fuel.2011.08.041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.