The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Production of upgraded bio-oils by biomass catalytic pyrolysis in an auger reactor using low cost materials
Open accessAbstract
Abstract Production of upgraded bio-oils by catalytic pyrolysis of wood biomass was studied in an auger reactor using low cost materials as catalysts. These materials included several clay minerals (sepiolite, bentonite and attapulgite) and an industrial waste from alumina production, known as red mud. The influence of temperature (400–500 °C) and the effect of catalyst to biomass ratio (3:1–1:6, in weight) were also analysed. A temperature of 450 °C and the lowest catalyst proportion (1:6, in weight) were selected as the most appropriate to aim the pyrolysis for bio-oil production. Catalyst to biomass ratio resulted critical since an excess on catalyst addition seemed to reduce liquid production while char yield increased. Under the selected conditions, the catalysts tested improved the characteristics of the obtained bio-oil as fuel (viscosity, acidity, oxygen content and calorific value). For every catalyst, the viscosity of the organic liquid fraction decreased (up to 34% in case of bentonite) while lower heating value increased (up to 20% in red mud tests). Concerning acidity, sepiolite and red mud produced a decrease in the total acid number (around 29% and 23%, respectively). The stability of the organic fraction after aging test (equivalent to long time storage) was also improved by each catalyst.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
Cited by
Kabir, G., & Hameed, B. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.001 · Cited by 591
Alkharabsheh, H. M., Seleiman, M. F., Battaglia, M. L., Shami, A., Jalal, R. S., Alhammad, B. A., Almutairi, K. F., & Al-Saif, A. M. (2021) · Agronomy · doi:10.3390/agronomy11050993 · Cited by 538
Auger reactors for pyrolysis of biomass and wastes
Campuzano, F., Brown, R. C., & Martínez, J. D. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.014 · Cited by 339
Biochar production and applications in agro and forestry systems: a review
Wang, D., Jiang, P., Zhang, H., & Yuan, W. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137775 · Cited by 280
Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Metadata
- Authors
- Veses, A., Aznar, M., López, J. M., Callén, M. S., Murillo, R., & García, T.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2015-02
- Volume
- 141
- Pages
- 17-22
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2042890567
- Cited by
- 174
- References
- 3
- FWCI
- 4.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production of upgraded bio-oils by biomass catalytic pyrolysis in an auger reactor using low cost materials. https://app.cochat.ai/papers/10.1016/j.fuel.2014.10.044
- The paper
- Veses, A., Aznar, M., López, J. M., Callén, M. S., Murillo, R., & García, T. (2015). Production of upgraded bio-oils by biomass catalytic pyrolysis in an auger reactor using low cost materials. Fuel. https://doi.org/10.1016/j.fuel.2014.10.044
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.