Mechanical stability and combustion characteristics of hydrochar/lignite blend pellets
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In the present study, hydrochar/lignite pellets were prepared and their fuel qualities including tensile strength, combustion characteristics and ash-related problems were investigated. The results showed that addition of hydrochar to lignite increased tensile strengths of lignite pellets, especially when the hydrochar fraction exceeded 50% in the blends. The main binding forces within hydrochar/lignite pellets were similar to those of hydrochar pellets; the lignite particles were merely interlocked within the matrix of the hydrochar structure. Obvious interactions were observed between hydrochar and lignite during blend pellet combustion and as a result, enhanced thermal efficiency and decreased air pollutant emissions were expected during hydrochar/lignite pellet combustion compared to lignite pellet combustion. The ash from hydrochar/lignite pellets had similar chemical composition to that from lignite pellets, indicating that the utilization and disposal of blend pellet ash would be similar to lignite pellet ash. Furthermore, hydrochar addition to lignite decreased slagging inclination of blended pellets. Based upon calculated slagging index (SI) values, ash from hydrochar/lignite blend pellets was within a low slagging inclination range when the hydrochar fraction in the blend pellets was higher than 50%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on biomass as a fuel for boilers
Saidur, R., Abdelaziz, E. A., Demirbas, A., Hossain, M. S., & Mekhilef, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.015 · Cited by 1,623
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808 · cited 5×
“In part, these forces are due to the presence of phenolic polymers (lignin structures), which serve as a natural binder, as well as strong H-bonding caused by substantial amounts of polar functional groups on the surface of hydrochar, and by the removal of extractives originally contained in raw biomass [6,18].”
BackgroundMethodSelf-citationSEM Investigation of Superheater Deposits from Biomass-Fired Boilers
Jensen, P. A., Frandsen, F. J., Hansen, J., Dam-Johansen, K., Henriksen, N., & Hörlyck, S. (2004) · Energy & Fuels · doi:10.1021/ef030097l · Cited by 96 · cited 1×
“1% for CF-HC and CS-HC, respectively), is helpful in minimizing slagging, reducing soot formation, and facilitating ash disposal [12,13].”
Background
Cited by
Syed-Hassan, S. S. A., Wang, Y., Hu, S., Su, S., & Xiang, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.262 · Cited by 641
Minireview of potential applications of hydrochar derived from hydrothermal carbonization of biomass
Fang, J., Zhan, L., Ok, Y. S., & Gao, B. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.08.026 · Cited by 600
A review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534
A review on hydrothermal carbonization of biomass and plastic wastes to energy products
Shen, Y. (2020) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105479 · Cited by 427
“Additionally, the durability and combustion characteristics of the hydrochar/lignite pellets were studied [97].”
BackgroundWang, T., Zhai, Y., Zhu, Y., Gan, X., Zheng, L., Peng, C., Wang, B., Li, C., & Zeng, G. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.06.093 · Cited by 109
Metadata
- Authors
- Liu, Z., Guo, Y., Balasubramanian, R., & Hoekman, S. K.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 164
- Pages
- 59-65
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2189299186
- Cited by
- 47
- References
- 3
- FWCI
- 3.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical stability and combustion characteristics of hydrochar/lignite blend pellets. https://app.cochat.ai/papers/10.1016/j.fuel.2015.10.004
- The paper
- Liu, Z., Guo, Y., Balasubramanian, R., & Hoekman, S. K. (2016). Mechanical stability and combustion characteristics of hydrochar/lignite blend pellets. Fuel. https://doi.org/10.1016/j.fuel.2015.10.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.