The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Co-pyrolysis of wood and plastics: Influence of plastic type and content on product yield, gas composition and quality
Open accessAbstract
In recent years, the world has witnessed a rapid rise in waste production and energy demand, which has increased interests in waste to energy processes, particularly the co-pyrolysis of wood and plastic waste. Nonetheless, for plastic waste, most research studies narrowly focus on polyolefins because of their abundance in waste streams and their high oil yields from pyrolysis. In this paper, we study the co-pyrolysis of non-polyolefins – polystyrene (PS) and polyvinyl chloride (PVC) – and poplar wood (PW), in order to investigate the synergistic effect of PS and PVC content on product yield, gas specie yield and heating value. The experiments were performed using a fixed-bed reactor, heated to 750 ° C at a rate of 20 ° C/min under nitrogen atmosphere. Our results show that PVC has a large positive synergy on char yield with a maximum value of 8 wt% at 30 wt% PVC content, whereas PS only showed a slightly positive synergy (2.5 wt% maximum). Concerning oil and gas production, PS provides a small synergy. However, PVC showed a significant positive synergy on oil yield with a maximum value of 11 wt% at 50 wt% PVC content, which was linked to a strong negative synergy in gas production. Regarding gas specie yields, the addition of PS led to positive synergies in the formation of H2, CH4, CO and CO2, although insignificant interactions were observed for C x H y compounds. Furthermore, by comparing the distribution of chloride species in the products of co-pyrolysis with PVC, using experimental and theoretical methods, we discovered that the negative synergy in HCl yield observed was mainly due to the dissolution of HCl in the water fraction of the condensed oil phase, rather than the formation of chlorinated organic compounds, as suggested in previous literature works. Our study therefore consolidates the understanding of the synergistic interactions between wood, PS and PVC co-pyrolysis, under conditions that favour gas production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903 · cited 1×
“Thus, the oil yield from PS/PW co-pyrolysis increases with PS content, which follows a similar trend reported in literature for co-pyrolysis with other biomass types at temperatures of roughly 400 ° C [3,21 – 23]. for However, in Fig.”
Background
Cited by
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
A review on alternative fuels in future energy system
Stančin, H., Mikulčić, H., Wang, X., & Duić, N. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109927 · Cited by 475
Thermochemical conversion of plastic waste to fuels: A review
Nanda, S., & Berruti, F. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01094-7 · Cited by 383
Ryu, H. W., Kim, D. H., Jae, J., Lam, S. S., Park, E. D., & Park, Y.-K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123473 · Cited by 336
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Metadata
- Authors
- Ephraim, A., Pham Minh, D., Lebonnois, D., Peregrina, C., Sharrock, P., & Nzihou, A.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 231
- Pages
- 110-117
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2804478335
- Cited by
- 178
- References
- 1
- FWCI
- 5.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Co-pyrolysis of wood and plastics: Influence of plastic type and content on product yield, gas composition and quality. https://app.cochat.ai/papers/10.1016/j.fuel.2018.04.140
- The paper
- Ephraim, A., Pham Minh, D., Lebonnois, D., Peregrina, C., Sharrock, P., & Nzihou, A. (2018). Co-pyrolysis of wood and plastics: Influence of plastic type and content on product yield, gas composition and quality. Fuel. https://doi.org/10.1016/j.fuel.2018.04.140
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.