The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Comparative study of nanoadditives TiO2, CNT, Al2O3, CuO and CeO2 on reduction of diesel engine emission operating on hydrogen fuel blends
Abstract
Abstract In this study, the impact of nanoparticles and hydrogen blends on combustion, performance and emission characteristics of modified dual fuel engine was investigated. The nanoparticles TiO2, CNT, Al2O3, CuO and CeO2 are dispersed at a fraction of 100 ppm with 20% hydrogen to form blends HT100, HCT100, HA100, HCE100 and HC100 respectively. The nanoparticles are agitated using ultrasonication process to increase the stability of blends. All blends are tested at 1800 rpm for different engine load varying from 0%, 25%, 50%, 75% and 100% respectively. The addition of nanoparticles does not show a substantial effect on density, kinematic viscosity and flash point and cetane number. Further, the nanoparticles CNT and TiO2 showed a better stability with 30% and 21% absorption rate at 240 h sedimentation time. All tested nanoparticles showed a profound change in the maximum cylinder pressure rates in comparison to neat diesel. Besides, the addition of CeO2 and Al2O3 improves the brake thermal efficiency by 4.3% and 2.5%. Meanwhile no significant change in brake specific fuel consumption is recorded for CeO2. The nanoparticles CNT and TiO2 reports 23% and 22% reduced BSFC than other blends. The results of exhaust emission showed addition of hydrogen and nanoparticles decreases the emission of carbon monoxide, carbon dioxide and hydrocarbon significantly. However, regarding NOx emission only CNT showed a profound decrease in NOx than other blends. From the results it is evident that, addition of nanoparticles and hydrogen on neat diesel improves the combustion characteristics and engine performance with reduced exhaust gas emission.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2016) · doi:10.1016/j.ijhydene.2016.05.293 · Cited by 1,112
Hydrogen the fuel for 21st century
Jain, I. P. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.093 · Cited by 1,104
Cited by
Biodiesel production from mixed oils: A sustainable approach towards industrial biofuel production
Brahma, S., Nath, B., Basumatary, B., Das, B., Saikia, P., Patir, K., & Basumatary, S. (2022) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2022.100284 · Cited by 412
A review on the pyrolysis of algal biomass for biochar and bio-oil – Bottlenecks and scope
Sekar, M., Mathimani, T., Alagumalai, A., Chi, N. T. L., Duc, P. A., Bhatia, S. K., Brindhadevi, K., & Pugazhendhi, A. (2021) · Fuel · doi:10.1016/j.fuel.2020.119190 · Cited by 293
Polat, F. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.03.003 · Cited by 52
Metadata
- Authors
- Manigandan, S., Sarweswaran, R., Booma Devi, P., Sohret, Y., Kondratiev, A., Venkatesh, S., Rakesh Vimal, M., & Jensin Joshua, J.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 262
- Pages
- 116336
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2984026945
- Cited by
- 176
- References
- 2
- FWCI
- 10.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparative study of nanoadditives TiO2, CNT, Al2O3, CuO and CeO2 on reduction of diesel engine emission operating on hydrogen fuel blends. https://app.cochat.ai/papers/10.1016/j.fuel.2019.116336
- The paper
- Manigandan, S., Sarweswaran, R., Booma Devi, P., Sohret, Y., Kondratiev, A., Venkatesh, S., Rakesh Vimal, M., & Jensin Joshua, J. (2020). Comparative study of nanoadditives TiO2, CNT, Al2O3, CuO and CeO2 on reduction of diesel engine emission operating on hydrogen fuel blends. Fuel. https://doi.org/10.1016/j.fuel.2019.116336
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.