Influence of additives on lignin agglomeration and pyrolysis behavior
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
During biomass pyrolysis, lignin agglomeration causes serious problems for lignin thermochemical conversion, including feeding clogging, reactor blocking, etc. To inhibit the agglomeration, the influence of 11 variant mineral additives (strong base, medium base and amphoteric compound) was investigated during lignin pyrolysis process. It was found that Mg(OH)2 and Ca(OH)2 adding are very effective, and they could inhibit the agglomeration of lignin particles and formed powdered char instead of hard-shelled char of raw lignin pyrolysis. Furthermore, the influence of Mg(OH)2 and Ca(OH)2 additives on pyrolytic products were investigated. It was found that they all promoted the formation of CO2, but Mg(OH)2 additive is strongly favorable for catechol phenols evolving, while Ca(OH)2 showed positive influence on the formation of OH functional group in solid bio-char, but reduced the formation of guaiacol phenol in liquid oil. It is great for the utilization of lignin and biomass.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Pyrolysis behaviors of four lignin polymers isolated from the same pine wood
Wang, S., Ru, B., Lin, H., Sun, W., & Luo, Z. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.01.127 · Cited by 348
Bio-oil from fast pyrolysis of lignin: Effects of process and upgrading parameters
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Cheng, Y., Addy, M., Lu, Q., Omar, M. M., Liu, Y., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.129 · Cited by 265
A Multitechnique Characterization of Lignin Softening and Pyrolysis
Shrestha, B., le Brech, Y., Ghislain, T., Leclerc, S., Carré, V., Aubriet, F., Hoppe, S., Marchal, P., Pontvianne, S., Brosse, N., et al. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01130 · Cited by 108
Effect of molecular weight on the pyrolysis characteristics of alkali lignin
Guo, D., Wu, S., Lyu, G., & Guo, H. (2017) · Fuel · doi:10.1016/j.fuel.2016.12.042 · Cited by 85
Fast pyrolysis of lignins with different molecular weight: Experiments and modelling
Marathe, P. S., Westerhof, R. J. M., & Kersten, S. R. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.058 · Cited by 71
Correlation of Feedstock and Bio-oil Compound Distribution
Li, J., Chen, Y., Yang, H., Zhu, D., Chen, X., Wang, X., & Chen, H. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00545 · Cited by 63
Self-citation
Cited by
Tao, L., Ma, X., Ye, L., Jia, J., Wang, L., Ma, P., & Liu, J. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105267 · Cited by 60
Demethylation of a methoxy group to inhibit repolymerization during alkaline lignin pyrolysis
Ma, H., Li, T., Wu, S., & Zhang, X. (2021) · Fuel · doi:10.1016/j.fuel.2020.119394 · Cited by 56
Zhang, H., Luo, B., Wu, K., Wu, H., Yu, J., & Wang, S. (2022) · Applications in Energy and Combustion Science · doi:10.1016/j.jaecs.2021.100049 · Cited by 3
Metadata
- Authors
- Li, J., Bai, X., Dong, Z., Chen, Y., Yang, H., Wang, X., & Chen, H.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 263
- Pages
- 116629
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2991574836
- Cited by
- 41
- References
- 7
- FWCI
- 1.58
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of additives on lignin agglomeration and pyrolysis behavior. https://app.cochat.ai/papers/10.1016/j.fuel.2019.116629
- The paper
- Li, J., Bai, X., Dong, Z., Chen, Y., Yang, H., Wang, X., & Chen, H. (2020). Influence of additives on lignin agglomeration and pyrolysis behavior. Fuel. https://doi.org/10.1016/j.fuel.2019.116629
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.