Low-temperature auto-ignition characteristics of NH3/diesel binary fuel: Ignition delay time measurement and kinetic analysis
The DOI matches its Crossref record.
Abstract
Abstract Ammonia (NH3) is gaining increasing interest as a carbon-free alternative fuel in engine systems. Co-firing NH3 with diesel can overcome the high auto-ignition temperature and narrow flammability limits of pure NH3, while exploit its advantage. This study presents the auto-ignition properties of NH3/diesel binary fuel, at various NH3 blending ratios (10%, 30% and 50%) in a rapid compression machine. Ignition delay times (IDTs) were measured spanning a temperature range of 670–910 K, pressures of 10–20 bar, and equivalence ratios of 0.5–1.5. Typical two-stage ignition and negative temperature coefficient (NTC) response were identified for the blends. Both the first-stage and the total IDTs increase with the increasing NH3 blending ratio, and there exists a non-linear inhibiting effect of NH3 fraction on IDT. A blending mechanism was then constructed based on the existing diesel mechanism and NH3 mechanism. The mechanism can predict the inhibiting effect of NH3 addition, but fails to well capture the IDTs over the whole temperature range, especially for the first-stage IDT and the NTC response. Further kinetic analysis, including species mole fraction history, brute force sensitivity analysis and reaction pathway analysis, were conducted to gain deeper insight into the auto-ignition chemistry of the blending fuel. These analyses suggest the rate parameters of reactions NH3 + OH ⇒ NH2 + H2O and NH2 + NO ⇒ N2 + H2O are critical to accurately predict IDTs, and the competition role of NH3 for OH radical inhibits the diesel low-T chain-branching sequence, which eventually leads to restraining the reactivity of the whole reaction system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
Yousefi, A., Guo, H., Dev, S., Liko, B., & Lafrance, S. (2022) · Fuel · doi:10.1016/j.fuel.2021.122723 · Cited by 520
Kurien, C., & Mittal, M. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114990 · Cited by 515
Yousefi, A., Guo, H., Dev, S., Lafrance, S., & Liko, B. (2022) · Fuel · doi:10.1016/j.fuel.2022.123412 · Cited by 297
Issayev, G., Giri, B. R., Elbaz, A. M., Shrestha, K. P., Mauss, F., Roberts, W. L., & Farooq, A. (2022) · Renewable Energy · doi:10.1016/j.renene.2021.09.117 · Cited by 256
Metadata
- Authors
- Feng, Y., Zhu, J., Mao, Y., Raza, M., Qian, Y., Yu, L., & Lu, X.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 281
- Pages
- 118761
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W3046163554
- Cited by
- 151
- References
- 0
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low-temperature auto-ignition characteristics of NH3/diesel binary fuel: Ignition delay time measurement and kinetic analysis. https://app.cochat.ai/papers/10.1016/j.fuel.2020.118761
- The paper
- Feng, Y., Zhu, J., Mao, Y., Raza, M., Qian, Y., Yu, L., & Lu, X. (2020). Low-temperature auto-ignition characteristics of NH3/diesel binary fuel: Ignition delay time measurement and kinetic analysis. Fuel. https://doi.org/10.1016/j.fuel.2020.118761
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.