One-step synthesis of microporous nitrogen-doped biochar for efficient removal of CO2 and H2S
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
It is still a great challenge to prepare an ideal adsorbent for the removal of CO2 and H2S from biogas efficiently. In this study, urea phosphate (UP) was selected as both activator and nitrogen (N) source to prepare the biochar adsorbent from plant biomass with microporous structure and N-rich functional groups through “one-step” synthesis. The results show that the yield of biochar increased from about 20% to 50%, and the SBET and Vmic of the obtained biochar were 1189 m2/g and 0.433 cm3/g, respectively, which was much higher than those without UP addition (524 m2/g and 0.17 cm3/g). Moreover, N was successfully doped on the surface of biochar, and the N content was up to 4.24 at.% with the majority of basic species such as pyridinic and pyrrolic N. This could be attributed to a large amount of N-containing functional groups and phosphoric acid released gradually at the presence of UP during the heating process. The prepared biochar exhibited good CO2 and H2S adsorption capacities up to 1.34 mmol/g and 54.8 mg/g, respectively, which was much higher than those without UP addition (0.958 mmol/g and 0.24 mg/g). The excellent adsorption properties of CO2 and H2S were tightly related to the improved microporous structure and surface basic N-containing functional groups on the biochar.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanism study of wood lignin pyrolysis by using TG–FTIR analysis
Liu, Q., Wang, S., Zheng, Y., Luo, Z., & Cen, K. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.03.007 · Cited by 965
About reactions occurring during chemical activation with hydroxides
Lillo-Ródenas, M. A., Juan-Juan, J., Cazorla-Amorós, D., & Linares-Solano, A. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.008 · Cited by 389
CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
Boujibar, O., Souikny, A., Ghamouss, F., Achak, O., Dahbi, M., & Chafik, T. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.03.005 · Cited by 137
Cited by
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Zhao, W., Yang, H., He, S., Zhao, Q., & Wei, L. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125797 · Cited by 255
Straw and wood based biochar for CO2 capture: Adsorption performance and governing mechanisms
Cao, L., Zhang, X., Xu, Y., Xiang, W., Wang, R., Ding, F., Hong, P., & Gao, B. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.120592 · Cited by 196
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Kundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Metadata
- Authors
- Ma, Q., Chen, W., Jin, Z., Chen, L., Zhou, Q., & Jiang, X.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 289
- Pages
- 119932
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W3110846154
- Cited by
- 101
- References
- 3
- FWCI
- 5.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: One-step synthesis of microporous nitrogen-doped biochar for efficient removal of CO2 and H2S. https://app.cochat.ai/papers/10.1016/j.fuel.2020.119932
- The paper
- Ma, Q., Chen, W., Jin, Z., Chen, L., Zhou, Q., & Jiang, X. (2021). One-step synthesis of microporous nitrogen-doped biochar for efficient removal of CO2 and H2S. Fuel. https://doi.org/10.1016/j.fuel.2020.119932
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.