Catalytic pyrolysis of rice husk by mixing with zinc oxide: Characterization of bio-oil and its rheological behavior
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The experiments on the rice husk pyrolysis were performed in a fixed-bed reactor to produce bio-oil. The effects of the different operation factors such as pyrolysis temperature、sweeping gas (N2) flow rates and ZnO catalyst on the yields of three products and the characteristics of bio-oil were investigated. The maximum bio-oil yield of 49.91% was obtained at 550 °C pyrolysis temperature with a heating rate of 25 °C/min and nitrogen flow rate of 150 mL/min. The bio-oils yielded with and without a catalyst were characterized by FT-IR and GC/MS. The results showed that the main identified compounds of bio-oils were phenols, phenol derivatives and long-chain aliphatic compounds. It was observed that the use of catalyst decreased the bio-oil yields, but enhanced the small molecular compound yields and decreased the amount of oxygenated groups in bio-oils. A series of rheological tests were performed for the two kinds of bio-oil with cone and plate rheometer. The results indicated that both types of bio-oil were typical non-Newtonian and strongly shear thinning liquids in the flow behavior. The viscosity of the ZnO-treated bio-oil was significantly lower than that of the bio-oil without any catalyst.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ateş, F., & Işıkdağ, M. A. (2008) · Energy & Fuels · doi:10.1021/ef7006276 · Cited by 126
Cited by
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Kabir, G., & Hameed, B. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.001 · Cited by 591
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Self-citationSharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Catalytic fast pyrolysis of biomass over zeolites for high quality bio-oil – A review
Rahman, M. M., Liu, R., & Cai, J. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.08.002 · Cited by 383
Metadata
- Authors
- Zhou, L., Yang, H., Wu, H., Wang, M., & Cheng, D.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2013-02
- Volume
- 106
- Pages
- 385-391
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2059987408
- Cited by
- 137
- References
- 1
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.