Effect of temperature gradient on composition and morphology of synthetic chlorine-containing biomass boiler deposits
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
A novel laboratory method has been developed to study the chemical and physical behavior of ash deposits in a temperature gradient. Experiments with synthetic alkali salt mixtures similar to biomass boiler deposits show that alkali chlorides evaporate from hotter particles in the deposit and condense on colder particles closer to the cooled metal surface or even condense on the metal surface. Formation of a partially or completely molten layer in the outer hotter region closer to the flue gas is also observed in the experiments. The effect of time is shown to be significant for the enrichment of chlorides as longer experiment time leads to higher amounts of vaporization, transport and condensation within the deposits. These effects are quantitatively verified using Computational Fluid Dynamics modeling. The transport of alkali chloride vapors becomes negligible if the deposit and metal temperature is cold enough. An enrichment of alkali chlorides towards the cooled metal surface occurs and can increase chlorine-induced corrosion of superheaters as the deposits mature over time. The experimental observations are similar to superheater deposit morphologies observed in biomass boilers, such as straw-fired grate boilers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
Grabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Deposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258
Influence of deposit formation on corrosion at a straw-fired boiler
Hansen, L. A., Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., Hørlyck, S., & Karlsson, A. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(00)00063-1 · Cited by 195
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Skrifvars, B.-J., Backman, R., Hupa, M., Salmenoja, K., & Vakkilainen, E. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.01.010 · Cited by 155
Self-citationSEM Investigation of Superheater Deposits from Biomass-Fired Boilers
Jensen, P. A., Frandsen, F. J., Hansen, J., Dam-Johansen, K., Henriksen, N., & Hörlyck, S. (2004) · Energy & Fuels · doi:10.1021/ef030097l · Cited by 96
Skrifvars, B.-J., Westén-Karlsson, M., Hupa, M., & Salmenoja, K. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.11.026 · Cited by 70
Self-citation
Research works printed but not linked: 18
- Nielsen, 2000, The implications of chlorine-associated corrosion on the operation of biomass-fired boilers, Prog. Energy Combust. Sci., 26, 283, 10.1016/S0360-1285(00)00003-4 · DOI · Paper page
- Spiegel, 1999, Salt melt induced corrosion of metallic materials in waste incineration plants, Mater. Corros., 50, 373, 10.1002/(SICI)1521-4176(199907)50:7<373::AID-MACO373>3.0.CO;2-T · DOI · Paper page
- Lindberg, 2007, Thermodynamic evaluation and optimization of the (NaCl+Na2SO4+Na2CO3+KCl+K2SO4+K2CO3) system, J. Chem. Thermodyn., 39, 1001, 10.1016/j.jct.2006.12.018 · DOI
- Zevenhoven, 2012, Characterization of ash-forming matter in various solid fuels by selective leaching and its implications for fluidized-bed combustion, Energy Fuel, 26, 6366, 10.1021/ef300621j · DOI · Paper page
- Hupa, 2001, Liquor-to-liquor differences in combustion and gasification processes: dust composition and melting properties, J. Pulp Pap. Sci., 27, 416
- Lindberg, 2010, High efficiency waste-to-energy plants — effect of ash deposit chemistry on corrosion at increased superheater temperatures, Energy Fuel, 24, 5387, 10.1021/ef100801e · DOI
- Bankiewicz, 2013, Determination of the corrosivity of Pb-containing salt mixtures, Corros. Sci., 66, 225, 10.1016/j.corsci.2012.09.024 · DOI
- Backman, 1987, Fouling and corrosion mechanisms in the recovery boiler superheater area, TAPPI J., 70, 123
- Isaak, 1986, Stickiness of fireside deposits in kraft recovery units, J. Pulp Pap. Sci., 12, J/84
- Okoro, 2014, High temperature corrosion under laboratory conditions simulating biomass-firing: a comprehensive characterization of corrosion products, Energy Fuel, 28, 6447, 10.1021/ef5017335 · DOI · Paper page
- Lagerbom, 2001, Behavior of alkaline sulfate-chloride salts in temperature gradient corrosion test furnace, VTT Symp., 215, 541
- Kawahara, 2006, Evaluation of high-temperature corrosion life using temperature gradient corrosion test with thermal cycle component in waste combustion environments, Mater. Corros., 57, 60, 10.1002/maco.200503895 · DOI
- Brossard, 2011, Superheater fireside corrosion mechanisms in MSWI plants: lab-scale study and on-site results, Mater. Corros., 62, 543, 10.1002/maco.201005849 · DOI
- Frederick, 2004, Mechanisms of sintering of alkali metal salt aerosol deposits in recovery boilers, Fuel, 83, 1659, 10.1016/j.fuel.2004.02.005 · DOI
- Griffiths, 1991, The determination of soret coefficients in molten salts by a new method using fiber-optic spectroscopy, J. Electrochem. Soc., 138, 3575, 10.1149/1.2085461 · doi:10.1149/1.2085461
- Bankiewicz, 2011, Role of ZnCl2 in high-temperature corrosion in a bench-scale fluidized bed firing simulated waste wood pellets, Energy Fuel, 25, 3476, 10.1021/ef200674k · DOI
- Bale, 2009, FactSage thermochemical software and databases — recent developments, Calphad, 33, 295, 10.1016/j.calphad.2008.09.009 · DOI · Paper page
- Berryman, 1983, Random close packing of hard spheres and disks, Phys. Rev. A, 27, 1053, 10.1103/PhysRevA.27.1053 · DOI · Paper page
Cited by
Kleinhans, U., Wieland, C., Frandsen, F. J., & Spliethoff, H. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.02.001 · Cited by 487
Deposit Shedding in Biomass-Fired Boilers: Shear Adhesion Strength Measurements
Laxminarayan, Y., Jensen, P. A., Wu, H., Frandsen, F. J., Sander, B., & Glarborg, P. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01312 · Cited by 23
Temperature gradient induced changes within superheater ash deposits high in chlorine
Balint, R., Engblom, M., Niemi, J., Silva da Costa, D., Lindberg, D., Yrjas, P., Hupa, L., & Hupa, M. (2021) · Energy · doi:10.1016/j.energy.2021.120439 · Cited by 16
Self-citationBreakdown mechanism of γ-Al2O3 on Ni2Al3 coatings exposed in a biomass fired power plant
Wu, D. L., Dahl, K. V., Grumsen, F. B., Christiansen, T. L., Montgomery, M., & Hald, J. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108583 · Cited by 16
Balint, R., Engblom, M., Niemi, J., Lindberg, D., Saarinen, T., Rautala, J., Hupa, M., & Hupa, L. (2023) · Energy · doi:10.1016/j.energy.2022.126576 · Cited by 9
Self-citation
Metadata
- Authors
- Lindberg, D., Niemi, J., Engblom, M., Yrjas, P., Laurén, T., & Hupa, M.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 141
- Pages
- 285-298
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2190507530
- Cited by
- 70
- References
- 8
- FWCI
- 4.09
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Funders
- National Technology Agency of Finland
- Andritz Oy
- Metso (Valmet) Power Oy
- Foster Wheeler Energia Oy
- UPM-Kymmene Oyj
- Clyde Bergemann GmbH
- International Paper Inc.
- Top Analytica Oy Ab (235/11)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.